THICKNESS - 10354 Anuncios

Viernes 20 diciembre 2013

Cantidad : 0000 - Precio : 0,00 €

1): Thickness： 0.4mm-1.8mm, 2): Special requirement： various colors and styles are available, with good elasticity, touches like genuine leather, with good air , abrasion resistance, wearable and washable 3): Capability : Widely suitable for decorations in automobiles: chair, door-board...

Jueves 19 diciembre 2013

Cantidad : 1000pcs - Precio : 0,45 €

Specifications Label/chip Type Fudan FM11RF08(Compatible Mifare 1K S50) Operating Frequency 13.56 MHz Capacity 1024 byte EEPROM (768 free bytes availability) Tested Read Range 0 - 100 mm depending on the power provided by the reader Multi-Detection Yes Size...

Miércoles 18 diciembre 2013

Cantidad : per order - Precio : very competitive

Products Flange, Elbows, Tees, Concentric and Eccentric Reducers, Pipe Caps, Bends, butt welding Material Carbon steel (seam & seamless) ASTM A234and A105 WPB S23520 Greed and 35.8 I Standard ASTM / JIS / DIN / BS / GB Size 1/2inch~~ 48inch Thickness SCH10~SCH160 / STD / SGP /...

Miércoles 18 diciembre 2013

Cantidad : per order - Precio : very competitive

Supply China pipe fittings,carbon steel fittings Product Butt Welding CS BW Pipe Fittings,Seamless Tee,Elbow,Reducer Type Butt Welded Size Seamless 1/2" To 24" Welded To 72" Wall thickness Sch5S-Sch160, XS, XXS Standards ANSI, ASTM, DIN, JIS, BS, ISO, GB, SH, AND HG etc Material Carbon Steel...

Sábado 14 diciembre 2013

Cantidad : 8000 reams - Precio : 1,00 €

Basic weight: 70,75,80gsm Whiteness: 102-104% Thickness: 103-110um Surface roughness TSml/min: 75 500sheets/ream,5reams/carton,or according to customers' requirements Ubicación : No. 8, First Avenue, Persiaran Bandar Utama 47800 Petaling Jaya, 47800 Kuala Lumpur, Persona a contactar ...

Martes 10 diciembre 2013

Cantidad : 10,0000 pi - Precio : $6.00/Set

Aluminum Step Stool Silver Clear Anodized Max Load : 150 KG ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ----- ---- High Quality Good Quality Care your Safety ----- -----...

Martes 10 diciembre 2013

Cantidad : 1 - Precio : 280,00 €

Model: SSB-8.5, 10, 10.6, 12.6 Length: 262-380(CM) Width: 74-82 (CM) Thickness: 11-15(CM) Ubicación : Fanjiabu Industry Zone, Economic Development Zone, Weihai, China, 264200 Haopo Town, Persona a contactar : Clove Dough, 00866315975990

Jueves 05 diciembre 2013

Cantidad : 100 - Precio : USD285/pc

Features Integrated with F probe Two working mode: direct and batch 500 measurement values can be stored Five statistical values: mean value (MEAN), maximum value (MAX), minimum value (MIN), measurement times (NO.) and standard deviation (S.DEV) Print-out function, capable of...

Jueves 05 diciembre 2013

Cantidad : 100 - Precio : USD520/pc

Features Two measuring methods: magnetic induction (F) and eddy current (N). When F probe is equipped, it can measure the non-magnetic coating in magnetism substrate, when N probe is equipped, it measure the non-conductive coating on non-magnetism substrate Click here for details...

Jueves 05 diciembre 2013

Cantidad : 100 - Precio : USD180/pc

Product Introduction The TT211 coating thickness tester is an economical model integrated with F probe. This thickness testing instrument features easy calibrtion on zero point, high speed data collection and provides single point measurement mode, automatic shutoff function. In addition...

Jueves 05 diciembre 2013

Cantidad : 100 - Precio : USD315/pc

Product Introduction Time TT210 Coating Thickness Gauge is designed for precise measurements of coatings on all Ferrous and Non-Ferrous metals. With built in dual mode probe, Professional fully automatic Paint Thickness Gauge with memory for 500 measurements and Min/Max/Dev statistical...

Jueves 05 diciembre 2013

Cantidad : 100 - Precio : USD1160/pc

Features Especially suitable for testing the thin workpieces I-E testing mode and E-E testing mode Sound velocity testing and single point calibration Sound alarm and differential mode are available mm/inch are selectable Data store, view and delete Result can be print out...

Jueves 05 diciembre 2013

Cantidad : 100 - Precio : USD/630/pc

Features Advanced handheld ultrasonic thickness gauge Suitable for most metallic and non-metallic materials ultrasonic can go through Auto-calibration of zero point, correction of system error Display current thickness or minimum thickness (menu selectable) Upper-lower limits...

Jueves 05 diciembre 2013

Cantidad : 100 - Precio : USD560/pc

Features Advanced handheld ultrasonic thickness gauge Suitable for most metallic and non-metallic materials ultrasonic can go through Auto-calibration of zero point, correction of system error Display current thickness or minimum thickness (menu selectable) Upper-lower limits...

Jueves 05 diciembre 2013

Cantidad : 100 - Precio : USD375/pc

Features Portable size and easy operation Suitable for any metallic and non-metallic materials ultrasonic can go through Self-compensating of nonlinearity function is supplied for correction of pickup nonlineasity Optional 2.5MHz，5MHz and 7MHz transducer are available Large...

Miércoles 04 diciembre 2013

Cantidad : 100 - Precio : USD800/pc

Features Six Impact Devices are available for special application Automatic identification of Impact devices On-Board memory holds 48-350 groups of data Software to connect with PC Upper and lower limit and sound alarm Large LCD with backlight, showing all functions and parameters...

Miércoles 04 diciembre 2013

Cantidad : 100 - Precio : USD960/pc

Features USB communication interface Automatic identification of impact test direction Memory of 270 average testing in 9 group files Upper and lower limit setting Automatically switch off Backlight for convenient use in darkness Battery capacity display AAA1.5V battery ...

Miércoles 04 diciembre 2013

Cantidad : 100 - Precio : USD1029/pc

Features Integrated D impact device, with no cables Wide measuring range in HLD and direct display of converted hardness values in HB,HRB,HRC,HRA,HV,HS Test at any angle Software calibration and battery indicator Compact device ,Simple handing and low test expenditure Technical...

Miércoles 04 diciembre 2013

Cantidad : 100 - Precio : USD670/pc

Features Direct conversion of HL,HRB,HRC,HB,HV,HS; Conversion to tensile strength Direct display showing all functions and parameters With high accuracy and wide measurement for all metallic material Seven different kinds of impact device are available, distinguish automatically...

Viernes 29 noviembre 2013

Cantidad : 100sqm(MOQ) - Precio : 2-60USD/Sq.m

Specifications: 1) Thickness: 1mm,2mm,4mm,6mm,8mm,10mm,for special pls contact us 2) Width: 2,100mm,for special pls contact us 3) Length: 2,440mm/5,800mm/6,000mm/11,800mm 4) Weight (kg/sqm): 0.9, 1.3, 1.5, 1.7, 5) Colors: clear, lake blue, green, blue, opal, brown, silvery gray...

Viernes 29 noviembre 2013

Cantidad : 100sq.m(MO) - Precio : 2-60USD/Sq.m

Specifications: 1) Thickness: 1mm,2mm,4mm,6mm,8mm,10mm,for special pls contact us 2) Width: 2,100mm,for special pls contact us 3) Length: 2,440mm/5,800mm/6,000mm/11,800mm 4) Weight (kg/sqm): 0.9, 1.3, 1.5, 1.7, 5) Colors: clear, lake blue, green, blue, opal, brown, silvery gray...

Viernes 29 noviembre 2013

Cantidad : 100sq.m - Precio : 2-60USD/Sq.m

Specifications: 1) Thickness: 1mm,2mm,4mm,6mm,8mm,10mm,for special pls contact us 2) Width: 2,100mm,for special pls contact us 3) Length: 2,440mm/5,800mm/6,000mm/11,800mm 4) Weight (kg/sqm): 0.9, 1.3, 1.5, 1.7, 5) Colors: clear, lake blue, green, blue, opal, brown, silvery gray...

Jueves 28 noviembre 2013

Cantidad : 1 piece - Precio : USD50000

One step injection blow molding machine/ Bottle blowing machine ISBM Machine Characteristics One step automatic injection blow molding machine for 5-1000ml PP, PE, PC, PS, ABS, BAREX material, one layer plastic bottle making in food, pharmaceutical, cosmetic packing industry. ...

Jueves 28 noviembre 2013

Cantidad : 1 piece - Precio : USD50000

Led lamp shade cover injection blow molding mahcine Machine Characteristics One step automatic injection blow molding machine for 5-1000ml PP, PE, PC, PS, ABS, BAREX material, one layer plastic bottle making in food, pharmaceutical, cosmetic packing industry. 1) Bottle neck moulded...

Jueves 28 noviembre 2013

Cantidad : 1 piece - Precio : USD50000

Plastic bottle injection blow molding machine Machine Characteristics One step automatic injection blow molding machine for 5-1000ml PP, PE, PC, PS, ABS, BAREX material, one layer plastic bottle making in food, pharmaceutical, cosmetic packing industry. 1) Bottle neck moulded by...

Jueves 28 noviembre 2013

Cantidad : 1 set - Precio : USD50000

3 Stations plastic bottle injection blowing machine Machine Characteristics One step automatic injection blow molding machine for 5-1000ml PP, PE, PC, PS, ABS, BAREX material, one layer plastic bottle making in food, pharmaceutical, cosmetic packing industry. 1) Bottle neck moulded...

Martes 26 noviembre 2013

Cantidad : 100 PIECES - Precio : 10000 $USD

Q38 Double Route Series Hanger Chains Type Continuous Working Overhead Rail Shot-blasting Machine Description Model Number: Q38 Machine Type: Abrator Cleaning Type: Manual Cleaning Process: shot blasting Use: Burnishing Industry Used: foundry, forging, steelstrucutre, steel pipe Fuel...

Martes 26 noviembre 2013

Cantidad : 100 PIECES - Precio : 10000 $USD

Q69 Series Steel Sheet Shot-blasting Pre-treatment Line Description Model Number: Q69 Machine Type: Abrator Cleaning Type: Manual Cleaning Process: shot blasting Use: Burnishing Industry Used: foundry, forging, steelstrucutre, steelplate, steel pipe Fuel: Electric Material: Metal...

Sábado 23 noviembre 2013

Cantidad : per order - Precio : very competitive

Item: A234 WPB carbon steel elbow,pipe elbow Material: A234-WPB. Bending Radius (R): R=0.5D 1D 1.5D 2D 3D 4D 5D 6D 7D 8D 9D 10D~20D Bending Angle: 15,30,45, 60, 90,135,180, also could manufacture according to the angles given by the clients. Straight Length(L): The length between...

Sábado 23 noviembre 2013

Cantidad : Negotiatio - Precio : Negotiation

Titan Globe is a professional manufacturer and exporter of various wood veneers. We have our own large automatic drying machine to gurantee veneer quality.Please see our MLH veneers: -Size: 4'X8' or 3'X6' or as your request; -Grade: AB or FC or FC1 or BAB -Species: Okoume,Bingtangor...