DEVICE - 13821 Anuncios

Miércoles 18 octubre 2017

A full lift safety valve is one in which the disc lifts sufficiently, so that the curtain area no longer influences the discharge area. The discharge area, and therefore the capacity of the valve are subsequently determined by the bore area. This occurs when the disc lifts a distance...

Miércoles 18 octubre 2017

A42Y-C type safety valve are used for the equipment and pipeline of the air, petroleum gas, liquid etc medium what the working temperature are less than 300℃. A42Y-P type and A42Y-R type are used for the equipment and pipeline of the quality with corrode medium what the working temperature...

Miércoles 18 octubre 2017

Introduction of low lift safety valve 1.In low lift safety valves, the disc only lifts a distance of 1/24th of the bore diameter. The discharge area is determined entirely by the position of the disc, and since the disc only lifts a small amount, the capacities tend to be much lower...

Miércoles 18 octubre 2017

Brief Introduction. This pressure reducing valve is robust direct acting bellows pressure reducing valve designed for use on steam,air and inert industrial type gases.The valve is available in four nominal sizes: DN25,DN32 ,DN40 and DN50. Set the outlet pressure through adjusting spring...

Miércoles 18 octubre 2017

Brief Introduction. Y14H/F Direct Acting Bellows Pressure Reducing Valve is newly improved product based on MIYAWAKI. This Direct Acting Bellows Pressure Reducing Valve material is Stainless steel, which can be used for some corrosive medium, it can also be used for Air, Steam, etc...

Miércoles 18 octubre 2017

Product Description: The Self Operated Temperature regulating valve is mainly applied in urban heating system and temperature regulating system of automatic control systems in other industries, which may be used for automatic control of temperature of all kinds of heating exchange...

Miércoles 18 octubre 2017

CQ5240E Double column Vertical Lathe for sale 1. Modularization design and the general products are mature, stable and reliable. 2. Excellent casting (HT300) is treated by heat ageing. 3. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding...

Miércoles 18 octubre 2017

Precio : Negotiable

C5235E Double-column Vertical Lathes 1. Modularization design and the general products are mature, stable and reliable. 2. Excellent casting (HT300) is treated by heat ageing. 3. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding compound type...

Miércoles 18 octubre 2017

C5231E Double-column Vertical Lathes china 1. Modularization design and the general products are mature, stable and reliable. 2. Excellent casting (HT300) is treated by heat ageing. 3. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding...

Miércoles 18 octubre 2017

C5228E Double-column Vertical Lathe 1. Modularization design and the general products are mature, stable and reliable. 2. Excellent casting (HT300) is treated by heat ageing. 3. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding compound type...

Miércoles 18 octubre 2017

Cantidad : 9999999999

C5225E Double-column Vertical Lathe 1. Modularization design and the general products are mature, stable and reliable. 2. Excellent casting (HT300) is treated by heat ageing. 3. The beam guide is handled by supersonic frequency induction hardening and it adopts rolling-sliding compound type...

Martes 17 octubre 2017

C5126E Single Column Vertical Lathes 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking...

Martes 17 octubre 2017

C5123E Single Column Vertical Lathes china 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking...

Martes 17 octubre 2017

C5120E Single Column Vertical Lathe china 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking...

Martes 17 octubre 2017

C5116E Single Column Vertical Lathe , the picture is the product exported to the USA. 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the...

Martes 17 octubre 2017

C5112E Single Column Vertical Lathe 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking...

Martes 17 octubre 2017

Nonwovens liquid loss tester built-in loss of Taiwan and sample fixture for non-woven fabric materials for a specific test fluid slip and loss of performance. Standards compliant: Edana152.0-99; ISO9073-11 The main purpose: Non-woven fabric liquid loss tester _ liquid slip and...

Martes 17 octubre 2017

The bending performance of the fabric is an important physical parameter that we study the properties of fabric, such as crisp, drape, and softness. The instrument uses bending length (also known as overhanging stiffness) and bending stiffness (also called bending stiffness) Mechanical...

Martes 17 octubre 2017

Mainly used for the determination of wool, rabbit hair and other animal fiber diameter and other natural, artificial mixed, blended product fiber content. Fiber fineness analyzer Main features: 1, the system uses computer digital image processing technology, by the computer, camera...

Martes 17 octubre 2017

Used to determine the static conditions of the fabric in the form of friction in the laboratory conditions. The sample was charged with a predetermined friction material, and the potential of the sample after the injection of the Faraday tube was measured, and the charge amount per...

Martes 17 octubre 2017

Friction Charging Tester is the antistatic fabric and knitted fabric friction generated by the amount of charged charge test equipment, used to measure the amount of static electricity charge. Standards compliant: JIS L-1094; JIS T-8118; ZB W 04008-89; GB / T12703.2-2009; GB 12014-2009...

Martes 17 octubre 2017

Sample Test Furnace by Fire Retardant Coating Standard: GB/T 12441-2005 Sample test furnace by fire retardant coating main purpose: Sample test furnace for Fire proof coating, or the fire retardant coating combustion test chamber, the chamber method consists of two main parts, the...

Martes 17 octubre 2017

Brief Introduction: Digital Elmendorf Tearing Tester is used for determining the tear strength of fabrics, non-woven, paper, cardboard, film, woven materials, polymer film, etc. Core advantages: The Digital Elmendorf Tearing Tester is using Elmendorf method to determine the tear...

Martes 10 octubre 2017

Cantidad : 50000 - Precio : US$16.9-100/sheet

- Quick Details - - CNC Machining or Not: CNC Machining - Type: Drilling, Milling - Material Capabilities: Other - Micro Machining or Not: Micro Machining - Place of Origin: Guangdong, China (Mainland) - Model Number: XC-3K-CNC - Brand Name: XC - Product name: Carbon fiber...

Martes 10 octubre 2017

Cantidad : 50000 - Precio : US$20-50/pieces

- Quick Details - - Place of Origin: Guangdong, China (Mainland) - Brand Name: XC - Model Number: XC-3KTM-221 - Application: RC Model copters ,Drone - Shape: carbon fiber strip - Dimensions: customized request - Product Type: Carbon Fiber - C Content (%): 100% - Working Temperature...

Martes 10 octubre 2017

Cantidad : 50000 - Precio : US$8-30/pieces

- Quick Details - - Place of Origin: Guangdong, China (Mainland) - Brand Name: XC - Model Number: XC-3KTM-25 - Application: RC Model copters ,Drone - Shape: Carbon Fiber Tube - Dimensions: 25mm 22mm 20mm 15mm 10mm OD - Product Type: Carbon Fiber - C Content (%): 100% - Working...

Martes 10 octubre 2017

Fabric Surface Flammability Tester Standards: GB / T 8745-2001 Textiles combustion properties of the fabric surface burning time determination, ISO 10047: 1993, Textile fabric surface burning time determination Application: Suitable for measuring the surface burning time of textile...

Martes 10 octubre 2017

Heat Resistance Contact Tester Product Details: Heat Resistance Contact Tester is mainly used to test fire clothes, thermal protective gloves, or similar thermal protection material against thermal heat contact heat capacity. The contact time between the temperature of the material...

Martes 10 octubre 2017

Moisture Permeability Test Device Standard: JIS L1099、GB/T 12704 Application: This device is a moisture permeability test for a breathable waterproof material having three functions of water resistance, moisture permeability and air permeability, which are developed for sportswear...

Martes 10 octubre 2017

Brief Introduction: Rubber elasticity tester, Rubber strikes the resilience elasticity tester for testing vulcanized rubber, experiments, moving iron bars, iron bars so that the end position in the scale of 100, and then the iron bar to fall freely read the fourth, five or six times...