ENSURE - 14068 Anuncios

Sábado 13 agosto 2016

Cantidad : Pretty - Precio : 850,00 €

Water-type Mold Temperature Controller NAMING PRINCIPLE OMT – xxxx – xx ① ② ③ ① Orste Mold Temperature Controller ② First Two Numbers: Heater Power (kw) Last Two Numbers: Pump Power (*10-1HP) ③ Notes HTW: Medium is Water with High temperature D: Dual-heating Zone FEATURES 1...

Sábado 13 agosto 2016

Cantidad : Pretty - Precio : 4 100,00 €

Plastic Cooling Machine Water-cooled Industrial Chiller NAMING PRINCIPLE OCM – xxW ① ② ① Orste Mold Cooling Machine ② Power of Compressor (HP), W=Water-cooled FEATURES 1. Cooling range is from 7 to 25 oC. 2. Insulated water tank is made of stainless steel. 3. Anti-freezing...

Sábado 13 agosto 2016

Cantidad : Pretty - Precio : 2 500,00 €

Plastic Air-cooled Cooling Machine Industrial Chiller NAMING PRINCIPLE OCM – xxA ① ② ① Orste Mold Cooling Machine ② Power of Compressor (HP), A=Air-cooled FEATURES 1. Cooling range is from 7 to 25 oC. 2. Insulated water tank is made of stainless steel. 3. Anti-freezing thermostat...

Sábado 13 agosto 2016

Cantidad : Pretty - Precio : 5 000,00 €

Plastic Mixing Machine Vertical Mixer NAMING PRINCIPLE OVM-xxx ① ② ① Orste Vertical Mixer ② Mixer Capacity (kg) FEATURES 1. Material-contact surface are all made of stainless steel ensures no contamination to the material. 2. Vertical screw features fast and even mixing. 3...

Sábado 13 agosto 2016

Cantidad : New - Precio : 1 000,00 €

Plastic Material Storage Mixing Mixer NAMING PRINCIPLE OSM-xxx ① ② ① Orste Storage Mixer ② Mixer Capacity (kg) FEATURES 1. Material-contact surface are all made of stainless steel ensures no contamination to the material. 2. Vertical screw features fast and even mixing. 3...

Sábado 13 agosto 2016

Cantidad : Pretty - Precio : 4 000,00 €

Plastic Material Horizontal Mixer NAMING PRINCIPLE OHM-xxx ① ② ① Orste Horizontal Mixer ② Mixer Capacity (kg) FEATURES 1. Material-contact surface are all made of stainless steel ensures no contamination to the material. 2. Mix rapidly and evenly. 3. Equipped with motor over-loading...

Sábado 13 agosto 2016

Cantidad : Pretty - Precio : 3 200,00 €

Plastic Powder Masterbatch Gravimetric Blender NAMING PRINCIPLE OGB-xxx-xx ① ② ③ ① Orste Gravimetric Blender ② Maximum Throughput (kg/hr) (4 Ingredients) ③ Quantity of Hoppers FEATURES 1. All the materials are mixed after gravimetry for accurate control. The accuracy is ±0...

Sábado 13 agosto 2016

Cantidad : Pretty - Precio : 1 200,00 €

Plastic Vertical Conveying Machine Screw Feeder NAMING PRINCIPLE OSF-xx-x ① ② ③ ① Orste Screw Feeder ② Outer Dia.of Conveying Pipe (mm) ③ Length of Conveying Pipe (m) FEATURES 1. Evenly mix different materials and effectively avoid material stratification during conveying process 2...

Sábado 13 agosto 2016

Cantidad : Pretty - Precio : 3 200,00 €

Plastic Loading Machine Auto-loader NAMING PRINCIPLE OAL- xxS ① ② ① Orste Auto-Loader ② Motor Power (HP) S: Separate Type FEATURES 1. Microprocessor for ease of use and accurate control. 2. Stainless hopper receiver ensures no material contamination. 3. Motor overload protector...

Sábado 13 agosto 2016

Cantidad : New - Precio : 2 500,00 €

Plastic Screening Machine Vibrating Screen NAMING PRINCIPLE OVS-x-x ① ② ③ ① Orste Vibrating Screen ② Hole Dia. of the Upper Screen (mm) ③ Hole Dia. of the Lower Screen (mm) FEATURES 1. Elaborate design ensures easy operation. 2. It is easy and convenient for changing screen and cleaning...

Sábado 13 agosto 2016

Cantidad : New - Precio : 1 980,00 €

Plastic Granulating Machine Low-speed Granulator NAMING PRINCIPLE OG-xx xx-LS ① ② ③ ④ ① Orste Granulator ② Width of Cutting Chamber (cm) ③ Length of Cutting Chamber (cm) ④ Motor Power (HP) LS: Low-speed type FEATURES 1. For OG-LS series granulators, teeth cutter and cutting...

Sábado 13 agosto 2016

Cantidad : New - Precio : 3 000,00 €

Plastic Granulating Crushing Machine Central Fast-speed Granulator NAMING PRINCIPLE OG-xx xx-FS ① ② ③ ④ ① Orste Granulator ② Width of Cutting Chamber (cm) ③ Length of Cutting Chamber (cm) ④ Motor Power (HP) FS：Fast-speed type FEATURES 1. Optimized structure and full-closed...

Sábado 13 agosto 2016

Cantidad : New - Precio : 6 000,00 €

Plastic Drying Machine Twin-tower Desiccant Dehumidifying Dryer NAMING PRINCIPLE OTD – xxx ① ② ① Orste Twin-tower Desiccant Dehumidifier ② Drying Air Quantity (m3/hr) FEATURES 1. Adopt German Simens PLC Program Controller and Temp. module. 2. Adopt large flow blower which has...

Sábado 13 agosto 2016

Cantidad : Pretty - Precio : 1 200,00 €

Plastic Granule Material Wheellie Storage Tank Bin Silo Introduction ORSTE's plastic material stainless steel storage bin is used to store small quantity of plastic pellet before pre-drying of pre-processed. It makes the plastic plant looks elegant, tidy and clean. The standard model...

Sábado 13 agosto 2016

Cantidad : New - Precio : 5 000,00 €

Plastic Machine Honeycomb Desiccant Dehumidifying Dryer NAMING PRINCIPLE ORD – xxxH ① ② ① Orste Rotary Honeycomb Dehumidifier ② Drying Air Flow (m3/hr), H: Honeycomb Rotor FEATURES 1. P.I.D temperature controller to accurately control regenerative temperature. 2. Adopt Japan...

Sábado 13 agosto 2016

Cantidad : new - Precio : 450,00 €

Plastic Drying Machine Hopper Dryer Naming Principle OHD - xxx ① ② ① Orste Hopper Dryer ② Hopper Capacity (L) Product Features 1. OHD series adopt hot air diffuser to gain an even hot air flow to improve drying efficiency. 2. Material-contact surface made of stainless steel...

Viernes 12 agosto 2016

Cantidad : CE - Precio : $135

Point 1 HAND MANUAL FORKLIFT : AUSEET GS pallet truck is a n economical solution, it can satisfied all the needs of the manual processing. Point 2 HAND MANUAL FORKLIFT: For fragile transport operator loads, such as glass or ceramic load, senior version includes a sensitive and...

Jueves 11 agosto 2016

1、Product introduction (1)100% human hair extension, no fiber, no synthetic (2)No chemical process, full cuticle aligned, could be dyed or bleached (3)Well constructed durable double weft to ensure no shedding (4)Waves / Curls holding after washing (5)Could be flat iron and...

Jueves 11 agosto 2016

Seven Characteristics of the Biomass Wood Sawdust Pellet Mill: 1) Vertical feeding directly in place. 2) Die static, roller rotating, materials centrifugal, evenly distributed around. 3) Double layer dies, up and down dual use, reduce the cost,enhance the efficiency, can be dual use...

Jueves 11 agosto 2016

I Theory 810nm system uses the unique laser with long pulse width 810nm to penetrate into hair follicle.Using the theory of selective optical absorption,laser can be preferentially absorbed by the melanin of the hair. And then the hair shaft and hair follicle are heated rapidly...

Miércoles 10 agosto 2016

Precio : USD$50/piece

Cone crusher spare parts Cone crusher is widely used in application industry, such as metallurgy, construction, mining, etc. It can be used as two or three broken, four broken. Hydraulic cone crusher, compound cone crusher and spring cone crusher various consumable parts are collectively...

Miércoles 10 agosto 2016

ROLL BITE BAKING MACHINE WITH SPECIAL TECHNOLOGY IN FACTORY 2015 hot selling factory design paper product making machines own mold design for machine we are the first supplier for making cake cup machines in China,and our machine quality is very good,it can use more than ten years...

Miércoles 10 agosto 2016

This embossing roller mold use on the machine pour fabrication dentelle papier The embossing roller can product 100T paper at least, So it can extend changing mold cycle We have our own designer team for paper doily mould and machines.and we are the first supplier in China in this scope...

Lunes 08 agosto 2016

Cantidad : 60000 mete - Precio : 0.1-3USD

Features Constructed of fiberglass reinforced in the center and consists of a rugged plastic layer that would ensure the lifetime of the flexible rod. Assembly: metal frame and rubber wheels, Wheel assembly for easy transportation; Guide rollers and the right parts for rotary coupling...

Lunes 08 agosto 2016

Cantidad : 60000 mete - Precio : 0.1-3USD

Features Constructed of fiberglass reinforced in the center and consists of a rugged plastic layer that would ensure the lifetime of the flexible rod. Assembly: metal frame and rubber wheels, Wheel assembly for easy transportation; Guide rollers and the right parts for rotary coupling...

Lunes 08 agosto 2016

Cantidad : 60000 mete - Precio : 0.1-3USD

Features Constructed of fiberglass reinforced in the center and consists of a rugged plastic layer that would ensure the lifetime of the flexible rod. Assembly: metal frame and rubber wheels, Wheel assembly for easy transportation; Guide rollers and the right parts for rotary coupling...

Lunes 08 agosto 2016

Cantidad : 60000 mete - Precio : 0.1-3USD

Features Constructed of fiberglass reinforced in the center and consists of a rugged plastic layer that would ensure the lifetime of the flexible rod. Assembly: metal frame and rubber wheels, Wheel assembly for easy transportation; Guide rollers and the right parts for rotary coupling...

Lunes 08 agosto 2016

Cantidad : 60000 mete - Precio : 0.1-3USD

Constructed of fiberglass reinforced in the center and consists of a rugged plastic layer that would ensure the lifetime of the flexible rod. Assembly: metal frame and rubber wheels, Wheel assembly for easy transportation; Guide rollers and the right parts for rotary coupling;...

Lunes 08 agosto 2016

Cantidad : 60000 mete - Precio : 0.1-3USD

our highest quality rod, designed for heavy-duty applications. It gets its extra strength from a unique construction process that ensures greater rigidity and strength, enabling it to endure the additional force required for long duct runs with multiple bends and sweeps. A braided...

Lunes 08 agosto 2016

Cantidad : 60000 mete - Precio : 0.1-3USD

Features Constructed of fiberglass reinforced in the center and consists of a rugged plastic layer that would ensure the lifetime of the flexible rod. Assembly: metal frame and rubber wheels, Wheel assembly for easy transportation; Guide rollers and the right parts for rotary coupling...