PROCESS - 17472 Anuncios

Viernes 27 marzo 2015

Cantidad : 25TON - Precio : USD 915/TON

Introduction: E-glass direct roving is especially designed as reinforcements for thermoset resins & coated with silane. They are compatible with unsaturated polyester(UP), Vinylester (VE), Epoxy (EO). It is used in filament winding and extrusion process, hand lay-up and woven...

Viernes 27 marzo 2015

Cantidad : 25TON - Precio : USD 1100/TON

Introduction: It is a bowing roving produced by directly winding a certain number of individual fibers form the bushing without twist,it is coated with a silane-based size and is designed for reinforcing unsaturated polyester, expoxy,vinylester and phenolic resins. it is speacially...

Viernes 27 marzo 2015

System sand production line has been carried out in full swing, stone processing different hardness, different environment, different discharge requirements of various different cost problems limiting stone production line. Nowadays the society, most people are more concerned about...

Viernes 27 marzo 2015

In all kinds of stone are in use today, it is particularly important to choose suitable crushing machine. And limestone, granite and gravel is most often seen in the life of the stone, only the broken to good use, what method of broken stone, can achieve low power, high efficiency...

Viernes 27 marzo 2015

Sand production line system because of its high production efficiency, product produce sandy uniformly, stable performance, plasticity and other advantages, and as an important fine aggregate concrete is conducive to enhancing the concrete and construction quality and thus gained...

Viernes 27 marzo 2015

System sand production line is currently the main source of sand production mechanism, which is composed of a variety of crushing machinery equipment composition, whether large or small stones, stone or, in short the production line's objective is to make these materials machined...

Jueves 26 marzo 2015

Equipment are often a strong vibration, will cause rapid wear of the two grouting cement face to face contact with the bottom of the base, the anchor bolt is easy to loose and even rupture, and may also cause the wedge iron loose, causing the wedge iron and two secondary grout layer...

Martes 24 marzo 2015

Cantidad : 1set - Precio : 50000usd

- Quick Details - - Condition: New - Application: Pipe - Plastic Processed: PVC - Screw Design: Double-screw - Automatic Grade: 2persons - Place of Origin: China (Mainland) - Brand Name: acemien - Model Number: Pipe Diameter: 16-800mm - Voltage: 380v - Power(W)...

Martes 24 marzo 2015

Cantidad : 1 sets - Precio : US $ 100,000 - 500,0

- Quick Details - - Condition: New - Application: Pipe - Plastic Processed: PE - Screw Design: Single-screw - Automatic Grade: full automatic - Place of Origin: Jiangsu, China (Mainland) - Brand Name: Acemien - Model Number: PE - Voltage: 380V or custiomized - Power(W)...

Martes 24 marzo 2015

Cantidad : 1 sets - Precio : US $ 58,000 - 98,000

- Quick Details - - Condition: New - Application: Sheet - Plastic Processed: PP - Screw Design: Single-screw - Automatic Grade: Automatic - Place of Origin: Jiangsu, China (Mainland) - Brand Name: Acemien Machinery - Model Number: ACM-PP2200 - Voltage: 380/220v - Power(W)...

Martes 24 marzo 2015

Cantidad : 1 sets - Precio : US $ 36,000 - 80,000

- Quick Details - - Condition: New - Application: Profile, window profiles, wide doors, elbowboards - Plastic Processed: WPC - Screw Design: Double-screw - Automatic Grade: Automatic - Place of Origin: Jiangsu, China (Mainland) - Brand Name: Acemien Machinery - Model Number...

Martes 24 marzo 2015

Cantidad : 1 sets - Precio : negotiated

CNC Beam lines for drilling and sawing MODEL SWZ1250 A. Main Composing Parts This machine is composed of mainframe, hydraulic system, feeding conveyor unit & electrical control system etc. B. Product feature of CNC Beam lines for drilling and sawing a) Equipped with three...

Martes 24 marzo 2015

Cantidad : 30 sets pe

CNC rotation Band Saw Machine Model DJ1250 A. Application It was mainly used for cutting H Beam, Slot steel, Box beam and bar steel with characteristics of easy operation, high efficiency and strong power etc. B. Technical parameter of Parameters of CNC rotation band saw machine...

Martes 24 marzo 2015

Cantidad : 30 sets pe - Precio : negotiated

CNC H beam 3D drilling machine 1) high precision positioning , dolly feeding driven by servo motor 2) 3D drilling line machine 3) Composed one CNC beam line together with CNC band saw machine Parameters of CNC H beam 3D drilling machine Name Unit Parameter Remark Range of workpiece...

Lunes 23 marzo 2015

Cantidad : MOQ: 1kg - Precio : $0.04/ct

Namuer's diamond are synthesised by HPHT(high pressure high temperature synthesis) under a rigorous quality control process. They are used for cutting tools, dressing tools, burnishing tools, wear parts and wire drawing dies.Our full range products can give customer enough options...

Lunes 23 marzo 2015

Sensor de presión industrial universales FST800-201 es una cepa sensor del calibrador de MEMS de silicio que es de vidrio unido a una membrana de acero inoxidable. Se evita influencias sobre producto causado por la temperatura, la humedad, la fatiga mecánica y medio, para así mejorar...

Lunes 23 marzo 2015

FST800-211 sensor de presión industrial universal es una cepa sensor medidor de MEMS de silicio que es de vidrio unido a un acero inoxidable diafragma. Se evita influencias sobre producto causado por la temperatura, la humedad, la fatiga mecánica y medio, para así mejorar su largo...

Domingo 22 marzo 2015

ASTM 4140 Chemical Composition(%) Mechanical Property C Si Mn S P Cr Ni Cu Mo Yield Strength ( σs ) Tensile Strength ( σb ) Hardness 0.38~0.43 0.15~0.35 0.75~1.00 ≤0.045 ≤0.030 0.80 ~ 1.10 ≤0.030 ≤0.030 0.15 ~ 0.25 ≥930(95)(MPa) ≥1080(110) (MPa) ≤217HB End Shape Beveled end...

Domingo 22 marzo 2015

German Standard: Product Name Executive Standard Specificaiton Range (mm) Steel Grade Cold drawn seamless precision tube DIN2391 Φ3~80 x 0.5~8 ST35,ST37.4,ST44, ST45,ST52 Tolerance Table of Steel Tube: NAME Scope (mm) DIN series(mm) Out Diameter 3-30 ±0...

Domingo 22 marzo 2015

42CrMo4 Chemical Composition(%) Mechanical Property C Si Mn S P Cr Ni Cu Mo Yield Strength ( σs ) Tensile Strength ( σb ) 0.38~0.45% 0.17~0.37% 0.50~0.80% ≤0.035% ≤0.035% 0.9~1.2% ≤0.03% ≤0.03% 0.15~0.25% ≥245(25) (MPa) ≥410(42) (MPa) End Shape Beveled end, plain end...

Viernes 20 marzo 2015

Features: Model: JW-939-AO Effio-V (4141 + 663) series, super through the fog, intelligent compensation image surrounding infrared light, with OSD / support 8 languages; with two-speed wide-dynamic, with scene selection, digital zoom, digital image stabilization, privacy zone shielding...

Miércoles 18 marzo 2015

Cantidad : 41 - Precio : 97 548,00 €

use of the vertical shaft hammer how much is a portable gold crusher in erdaogou gold mining company . the functions of the heavy apron-feeder modulus for semi-portable how much is a portable gold crusher station is emphatically discussed in this paper. based on actual situation...

Martes 17 marzo 2015

Cantidad : 9999 - Precio : 9 999,00 €

the jaw stone live stone crusher plant is driven by the pulley belt and it's speed is very high. the jaw stone live stone crusher plant is widely used in the mining machinery and coal mine machine. selected belt type according to the actual power of the jaw stone live stone crusher...

Lunes 16 marzo 2015

Feature: *Explosive device pipe *Blowing return function (optional) *Return water temperature indicator *Power automatic exhaust function of heating power switching *Instant cooling power function *BY-PASS relief of hot water loop *Multi-point temperature control unit can...

Sábado 14 marzo 2015

Coal briquette machine is a popular briquette machine in the market, which has high quality and reasonable price. As we know, in the coal briquetting machine using process, in order to produce qualified products, the quality of the machine is the one hand, the other hand is the technology...

Miércoles 11 marzo 2015

Cantidad : 100 set - Precio : Negotiatable

Technical Specification: Model No.: SYHO-2000 Power Pressure(V): 380V(50-60)HZ±10% Output Voltage(KW): 6 Rated Gas Output(L/h): 2000 Water Consumption(L/h): 0.8 Working Method: Continuous Working Pressure(MPa): ≤0.08 Environment Temperature(ºC): 0-40 Relative Humidity(%)...

Miércoles 11 marzo 2015

Cantidad : 100 set - Precio : Negotiatable

Technical Parameters: Model No.: SYK-2000-II Input Voltage: AC 220V Rated Power: 4.0KW Input air pressure: 0.6MPa Steam pressure: 0.4MPa Dimensions: 1170*520*545mm Weight(kg): 85KG Standard: CE Product Feature and Characteristics: Selling points 1) It is visible for the...

Lunes 09 marzo 2015

FST800-211 universal industrial pressure sensor is a silicon MEMS strain gauge sensor which is glass bonded to a stainless steel diaphragm. It avoids influences on product caused by temperature, humidity, mechanical fatigue and medium, thus to improve its longterm stability in the...

Lunes 09 marzo 2015

FST800-217 universal industrial pressure temperature sensor is a silicon MEMS strain gauge sensor which is glass bonded to a stainless steel diaphragm. It avoids influences on product caused by temperature, humidity, mechanical fatigue and medium, thus to improve its longterm stability...

Lunes 09 marzo 2015

BS12 Piezoresistive OEM Pressure Sensor Feature  Pressure range （-0.1～0…60）MPa;  Gauge, absolute and sealed gauge;  Constant current power supply;  Isolated construction to measure various media  Φ19mm OEM pressure element  316L stainless steel material  Perfect long...