STEELS - 23864 Anuncios

Lunes 25 abril 2016

Brand-New High Quality FibreGlass Duct Rodders or Snake Pullers can be used for NBN, Telecommunication, Electrician and other Department HDPE Pipe Cable, the specific tapes as push-pull tools. Common features as below: 1. Strong non-conductive fiberglass rod construction. 2. Every...

Lunes 25 abril 2016

Feed device allows rod to feed out or be back with easy push or pull of rod Rugged tubular steel reel with adjustable positioning Rustproof bull-nose pulling eye for longer conduit run and underground duct Constructed of fiberglass reinforced in the center and consists of a rugged...

Lunes 25 abril 2016

Technical Date of Fiberglass Duct Rodder Specification Rod Diameter (mm) Φ 4.5-Φ 16 Rod Length (m) 30m~500m Frame Spec. (mm) 1300x450x1330,1200x420x1220,980x350x1000 ,680x240x700, 420x180x400,etc. Material: Fiber glass rod inner, Extruded by fiber glass and high strength resin...

Lunes 25 abril 2016

The Reel Rod has a sturdy, powder coated, steel tube frame and features a 16" diameter storage basket. Up to 400 ft. of rod can be stored in this basket. A light adjustable brake prevents the rod from reeling out of the basket under its own tension. The standard Reel Rods include...

Lunes 25 abril 2016

Common features as below: 1. Strong non-conductive fiberglass rod construction. 2. Every Metre Marking for Easy use. 3. Yellow Color for better Visibility. 4. Rugged tubular steel reel. 5. Equipped with adjustable brake position. 6. For longer conduit runs and underground duct 7...

Lunes 25 abril 2016

Common features as below: 1. Strong non-conductive fiberglass rod construction. 2. Every Metre Marking for Easy use. 3. Yellow Color for better Visibility. 4. Rugged tubular steel reel. 5. Equipped with adjustable brake position. 6. For longer conduit runs and underground duct 7...

Lunes 25 abril 2016

Feed device allows rod to feed out or be back with easy push or pull of rod Rugged tubular steel reel with adjustable positioning Rustproof bull-nose pulling eye for longer conduit run and underground duct Constructed of fiberglass reinforced in the center and consists of a rugged...

Lunes 25 abril 2016

Technical Date of Fiberglass Duct Rodder Specification Rod Diameter (mm) Φ 4.5-Φ 16 Rod Length (m) 30m~500m Frame Spec. (mm) 1300x450x1330,1200x420x1220,980x350x1000 ,680x240x700, 420x180x400,etc. Material: Fiber glass rod inner, Extruded by fiber glass and high strength resin...

Lunes 25 abril 2016

The Reel Rod has a sturdy, powder coated, steel tube frame and features a 16" diameter storage basket. Up to 400 ft. of rod can be stored in this basket. A light adjustable brake prevents the rod from reeling out of the basket under its own tension. The standard Reel Rods include...

Lunes 25 abril 2016

Brand-New High Quality FibreGlass Duct Rodders or Snake Pullers can be used for NBN, Telecommunication, Electrician and other Department HDPE Pipe Cable, the specific tapes as push-pull tools. Common features as below: 1. Strong non-conductive fiberglass rod construction. 2. Every...

Lunes 25 abril 2016

Technical Date of Fiberglass Duct Rodder Specification Rod Diameter (mm) Φ 4.5-Φ 16 Rod Length (m) 30m~500m Frame Spec. (mm) 1300x450x1330,1200x420x1220,980x350x1000 ,680x240x700, 420x180x400,etc. Material: Fiber glass rod inner, Extruded by fiber glass and high strength resin...

Lunes 25 abril 2016

The Reel Rod has a sturdy, powder coated, steel tube frame and features a 16" diameter storage basket. Up to 400 ft. of rod can be stored in this basket. A light adjustable brake prevents the rod from reeling out of the basket under its own tension. The standard Reel Rods include...

Lunes 25 abril 2016

Brand-New High Quality FibreGlass Duct Rodders or Snake Pullers can be used for NBN, Telecommunication, Electrician and other Department HDPE Pipe Cable, the specific tapes as push-pull tools. Common features as below: 1. Strong non-conductive fiberglass rod construction. 2. Every...

Lunes 25 abril 2016

Cable Grips are a quick, efficient way to install/control electrical or heavy-duty cables. Cable Grips are re-usable (subject to inspection) and can also be used to support or pull any cylindrical object within their grip and load carrying capacity. These Grip offer a flexible...

Lunes 25 abril 2016

Cable Grips are a quick, efficient way to install/control electrical or heavy-duty cables. Cable Grips are re-usable (subject to inspection) and can also be used to support or pull any cylindrical object within their grip and load carrying capacity. These Grip offer a flexible...

Lunes 25 abril 2016

Pulling grips Styles and Applications 1.Medium duty pulling grips are double weave for added strength with greater mesh contact on the cable to handle longer or heavier pulling jobs. 2.light duty pulling grips are single weave with a flexible eye for easy attachment to a pulling line...

Lunes 25 abril 2016

Cable Socks / cable pulling grip mainly used for all kinds of wire and cable (overhead conductors, insulated cables, etc.) of tractor pay-off construction, is the electric power (or communication) line construction engineering ideal tool. According to the construction unit for decades...

Lunes 25 abril 2016

Open weave hoisting grips provide an effective means for hoisting coax and elliptical waveguide into position and can be utilized to provide additional support once in place. The lace-up design allows the hoisting grip to be attached even when the run has been connectorized and facilitates...

Lunes 25 abril 2016

Cable Grips are a quick, efficient way to install/control electrical or heavy-duty cables. Cable Grips are re-usable (subject to inspection) and can also be used to support or pull any cylindrical object within their grip and load carrying capacity. These Grip offer a flexible...

Lunes 25 abril 2016

Pulling grips Styles and Applications 1.Medium duty pulling grips are double weave for added strength with greater mesh contact on the cable to handle longer or heavier pulling jobs. 2.light duty pulling grips are single weave with a flexible eye for easy attachment to a pulling line...

Lunes 25 abril 2016

Cable Socks / cable pulling grip mainly used for all kinds of wire and cable (overhead conductors, insulated cables, etc.) of tractor pay-off construction, is the electric power (or communication) line construction engineering ideal tool. According to the construction unit for decades...

Lunes 25 abril 2016

Cable Grips are a quick, efficient way to install/control electrical or heavy-duty cables. Cable Grips are re-usable (subject to inspection) and can also be used to support or pull any cylindrical object within their grip and load carrying capacity. These Grip offer a flexible...

Lunes 25 abril 2016

Pulling grips Styles and Applications 1.Medium duty pulling grips are double weave for added strength with greater mesh contact on the cable to handle longer or heavier pulling jobs. 2.light duty pulling grips are single weave with a flexible eye for easy attachment to a pulling line...

Lunes 25 abril 2016

Cable Grips are a quick, efficient way to install/control electrical or heavy-duty cables. Cable Grips are re-usable (subject to inspection) and can also be used to support or pull any cylindrical object within their grip and load carrying capacity. These Grip offer a flexible...

Lunes 25 abril 2016

Open weave hoisting grips provide an effective means for hoisting coax and elliptical waveguide into position and can be utilized to provide additional support once in place. The lace-up design allows the hoisting grip to be attached even when the run has been connectorized and facilitates...

Lunes 25 abril 2016

Cable Grips are a quick, efficient way to install/control electrical or heavy-duty cables. Cable Grips are re-usable (subject to inspection) and can also be used to support or pull any cylindrical object within their grip and load carrying capacity. These Grip offer a flexible...

Lunes 25 abril 2016

Pulling grips Styles and Applications 1.Medium duty pulling grips are double weave for added strength with greater mesh contact on the cable to handle longer or heavier pulling jobs. 2.light duty pulling grips are single weave with a flexible eye for easy attachment to a pulling line...

Lunes 25 abril 2016

Cable Socks / cable pulling grip mainly used for all kinds of wire and cable (overhead conductors, insulated cables, etc.) of tractor pay-off construction, is the electric power (or communication) line construction engineering ideal tool. According to the construction unit for decades...

Lunes 25 abril 2016

Open weave hoisting grips provide an effective means for hoisting coax and elliptical waveguide into position and can be utilized to provide additional support once in place. The lace-up design allows the hoisting grip to be attached even when the run has been connectorized and facilitates...

Lunes 25 abril 2016

Cable Grips are a quick, efficient way to install/control electrical or heavy-duty cables. Cable Grips are re-usable (subject to inspection) and can also be used to support or pull any cylindrical object within their grip and load carrying capacity. These Grip offer a flexible...