VALVE F00RJ00005 - 5564 Anuncios

Sábado 29 octubre 2022

Precio : 5000-30000

Double Injection Mold Parts Part function: Plastic Lid for coffee machine Part Standard according to ISO 11496 Surface: SPI A-2 finish Flammability classification: UL-94 HB Part material: ABS & TPE Shrinkage: 0.55% Cavity steel: ASSAB 8407 Life Cycle: 500,000 shots Payment: 40% deposit...

Sábado 29 octubre 2022

Cantidad : 500000 Pie - Precio : US $1 - 3,000 / Set

Features of single orifice air release valve Can be a large amount of exhaust, improve water efficiency pump Can be a small amount of exhaust, make sure the pipe is full of water; Interface with filter screen, filter impurities, long life; Float ball is made of SS304, resistant to corrosion...

Sábado 29 octubre 2022

Cantidad : 500000 Pie - Precio : US $1 - 3,000 / Set

Features of resilient seal gate valve Full diameter flat - bottom runner, no debris pooling; Fully covered EPDM disc, no corrosion; Movable disc's nut, adaptive offset; The variable pressure change O-Ring. Resilient Seated Gate Valve Working Principle The main seal is entirely rubber...

Sábado 29 octubre 2022

Cantidad : 500000 Pie - Precio : US $1 - 3,000 / Set

This valve is installed at the outlet of the water pump. It can prevent the backflow of the medium, linked with the water pump, and can effectively prevent the water hammer phenomenon. Festures of pump flow control valve Slow closing effectively prevents water hammer. Stop pump stable...

Sábado 29 octubre 2022

Cantidad : 500000 Pie - Precio : US $1 - 3,000 / Set

This valve is opened to prevent the pipeline and equipment from being damaged due to overpressure when the pressure in the water supply pipeline exceeds the set pressure of pressure relief. The valve closes automatically when pressure drops to the set value. Festures of cold water...

Sábado 29 octubre 2022

Cantidad : 500000 Pie - Precio : US $1 - 3,000 / Set

It adjusts and controls the outlet pressure of the main valve to enable the outlet pressure of the main valve not vary with inlet pressure, enable the outlet flow rate of the main valve not to vary with its outlet flow rate. Festures of pressure reducing valves for fire protection...

Sábado 29 octubre 2022

Categories: Gate Valve, Gate Valve By Material Tag: OS&Y Valve Description Cryogenic gate valves are adapted to special conditions of service, being designed to operate effectively at temperatures below -40ºC, mainly used in gas liquefaction systems. What is a Cryogenic Valve？...

Viernes 28 octubre 2022

Cantidad : 100

HBTE offers a wide range of advanced positioning equipments: single axis, dual-axis, and multi-axis rotary positioners, antenna masts, and linear of various lengths. Positioning equipment is a kind of complex modern equipment with mechatronics, which plays a key role in the field...

Jueves 27 octubre 2022

Multi cavity mould is an injection mold that has more than one cavity. The shape of each cavity is the same. Multi cavity mold design is to produce multiples of the same part for high volume production since it means each production will produce a large number of finished parts...

Jueves 27 octubre 2022

Cantidad : 5000 - Precio : 30-800000 USD

Features: F1600HL Triplex high pressure mud pump has a max. working pressure of 7,5000PSI and a displacement of 46.5L/S with 6" mud pump liner size. It belongs to high pressure pump. This model is the first choice for the medium and deep drilling rig. The F1600 triplex has a max...

Jueves 27 octubre 2022

Cantidad : 5000 - Precio : 30-800000 USD

Features F 1300 mud pump for oil drilling have features of solid and compact structure, small volume, good and reliable performance. It can meet the drilling requirements such as high pressure and big displacements whether in land drilling or off-shore drilling. F 1300 mud pumps have...

Jueves 27 octubre 2022

Cantidad : 5000 - Precio : 30-800000 USD

F1000 mud pump for oil drilling have features of solid and compact structure, small volume, good and reliable performance. It can meet the drilling requirements such as high pressure and big displacements whether in land drilling or off-shore drilling. F 1000 mud pumps have a longer...

Jueves 27 octubre 2022

Cantidad : 5000 - Precio : 30-800000 USD

Drilling Pump Gasket Our company provides different seal rings and O rings for F-500, F-800/1000, F-1300/1600, 3NB-1000, 3NB-1300C, 3NB-1600, QZ3NB350, QZ3NB-500, QZ3NB-1000, SL3NB-1300A,SL3NB-1600,PZ-7/8/9/10/11, A-850/1400PT/1700PT, 9-P-100, 10-P-130, 12-P-160, 14-P-220 china mud pump parts...

Jueves 27 octubre 2022

Cantidad : 5000 - Precio : 30-800000 USD

Discharge manifold is the main part of discharge end of mud pump. The material is 35CrMo. One end is equipped with an exhaust filter assembly that delivers the pressure generated by the mud pump directly to the well, and the other end is equipped with an air pack assembly and safety valve...

Sábado 22 octubre 2022

Precio : 10-30USD

Nowadays, li ion battery types have become various. PLS Battery, as one of li ion battery suppliers, offers different types of lithium batteries with NCM or LiCoO2 materials, including lithium ion 18650, 26650 lithium ion battery, 32650 lithium ion battery, 18500 li ion battery, 14500...

Jueves 20 octubre 2022

The gear reducer is designed as a kind of reduction equipment of a cooling tower, which is generally used for transmission equipment with low speed and large torque. It uses all levels of gear transmission to achieve the purpose of speed reduction. The gear is made of high strength...

Jueves 20 octubre 2022

The cooling tower float ball, also called the float valve, is designed at the bottom of the pool. When the float ball is lower than the set value, the cooling tower will make up water automatically. One section of the float ball is fixed on the pool wall of the cooling tower and connected...

Jueves 20 octubre 2022

Cantidad : USD3000-20 - Precio : 30-40sets/per month

Pre Deformation Mold When the plastic material rushes into the mold cavity, it loses heat due to heat conduction, and the melted plastic will freeze and solidify, therefore, for complex or large products, high mold temperature is usually used for filling, the purpose is to reduce...

Jueves 20 octubre 2022

Precio : 5ton/day

What is BM6 High Pressure Motor? BM6 high pressure hydraulic motor is a face-end flow, pressure-compensated motor, mainly composed of output shaft, front cover, bearing, long linkage shaft, bearing housing, stator and rotor pair, valve disc, small linkage shaft, distribution plate...

Jueves 20 octubre 2022

Precio : 5ton/day

What is BM2 Hydraulic Spool Valve Motor? BM2 motor is a spool valve type motor. Characteristic Features of BM2 Hydraulic Spool Valve Motor: 1, lt adapt the gerolor design. Combination efficiency is better than BM1 motor. 2, Credible design for shaft seal, which can bear high pressure...

Jueves 20 octubre 2022

Precio : 5ton/day

What is BM1 Small Hydraulic Motor? The BM1 is a small, spool valve type gerotor motor. The characteristics of BM1 small hydraulic motor are as follows: 1. Compact shaft and insert-type stator and rotor design, small size, high power and light weight. 2. Reliable shaft seal design...

Miércoles 19 octubre 2022

Ball Valve Flange Type 3 Way Flanged Ball Valve 3 Piece Flanged Ball Valve PP Ball Valve Flange End PVC Ball Valve Flange Type SS Ball Valve Flange Type Valves Flange Type Ball Valve Dimensions Class Nominal diameter Unit Main connection dimension Inch DN L D D1 D2 b ...

Miércoles 19 octubre 2022

A flange is a projecting disc-shaped collar or rim on an object for locating or strengthening it or for attaching it to another object. Flanges are used for making connections for piping ANSI refers to the American National Standards Institute, founded in 1918. At first, it were commonly...

Miércoles 19 octubre 2022

ANSI 150 flange, the standard flange with pressure grade CLASS150 (150LB), is the most widely used pressure flange in practice, its relevant flange size requirements and technical parameters are stipulated in flange standards ASME B16.5 and ASME B16.47 and BS3293. ANSI 150 Flange...

Miércoles 19 octubre 2022

The high-mounting pad three-piece internal threaded ball valve is composed of a three-part structure, which is mainly composed of the middle valve body and the left and right valve bodies, which are connected by four bolts. It is convenient to install and disassemble on the right...

Miércoles 19 octubre 2022

PEEK has good wear resistance, self-lubrication, non-toxicity, high-temperature resistance, low density, and can decrease noise, reduce energy consumption and prolong service life compared to metals. PEEK can be formed by one-step injection moulding with high production efficiency...

Martes 18 octubre 2022

UTMOST, as one of the most professional knife edge gate valve manufacturers in China, sticks to providing high performance automatic knife gate valve at a very attractive price. As a knife gate valve factory, knife gate valve supplier and knife gate valve manufacturer, we offer pneumatic...

Martes 18 octubre 2022

UTMOST, as one of the most professional high performance butterfly valves manufacturers in China, is devoted to providing fisher high performance butterfly valves at a very competitive price. The valve plate sealing surface of high performance butterfly valve is a spherical arc surface body...

Martes 18 octubre 2022

UTMOST, as one of the most professional globe valve suppliers in China, sticks to providing high performance pneumatic actuator globe valves of different sizes and materials. A full selection of globe valve materials including carbon steel, stainless steel, heat resisting steel, alloy steel...

Martes 18 octubre 2022

UTMOST cryogenic gate valve company is one of the best gate valve manufacturers in china of industrial gate valves in China. We provide industrial gate valves of various materials, such as Inconel, Monel, and Hastelloy alloy on offer. Actuators are both on electric and pneumatic options...