HEAD - 6911 Anuncios

Sábado 16 abril 2022

Longguang' products have a wide range of applications in the automotive field. We also have close cooperation with various automobile industry manufacturers in China over ten years, such as Toyota and Bosch, which has also accumulated a lot of experience and cases in this industry...

Viernes 15 abril 2022

Cantidad : 3000000PCS - Precio : USD0.015-USD0.50

The glass bottle container is made of high boron silicon, which has the advantages of high-temperature resistance and corrosion resistance. It is widely used in pharmaceuticals, essential oils, and other personal care products. The bottle cap and dropper cap of the glass containers...

Jueves 14 abril 2022

The Auxiliary equipment refers to machines for metal sheets before being formed and profiles after formed. The equipment for metal sheets including Decoilers, Steel coil slitting equipment, Cutting to length equipment, embossing line, and so on. According to roll forming equipment requirements...

Miércoles 13 abril 2022

A centrifuge is a laboratory device that is used for the separation of fluid, gas, or liquid, based on density separation is achieved by spinning a vessel containing material at high speed: the centrifugal force pushes heavier materials to the outside of the vessel This apparatus...

Miércoles 13 abril 2022

Cantidad : 50000pcs - Precio : 100-60000

TBM disc cutter is a disc-shaped roller cutter mounted on the cutterhead of tunnel boring machine, which is an excavation tool for breaking hard rocks. The disc cutters can be mounted on the cutter heads of large non-excavation construction equipment such as shield machines, TBMs...

Miércoles 13 abril 2022

Cantidad : 50000pcs - Precio : 100-60000

Tunnel boring machine cutter, referred to as "TBM Cutters", are excavation tools installed on the cutter heads of tunnel boring machines and shield machines, which include TBM disc cutters (single disc cutter, double disc cutter, twin disc cutter) and soft ground cutters (eg. scrapers...)

Miércoles 13 abril 2022

Cantidad : 50000pcs - Precio : 100-60000

Soft ground cutter refers to a rock breaking tool that only rotates with the cutter head and does not rotate. There are many kinds of soft soil cutting tools, and currently commonly used mainly include TBM scraper, edge scraper, cutting knife, rippers, buckets, etc. The suitable formations...

Miércoles 13 abril 2022

Cantidad : 50000pcs - Precio : 100-60000

Single disc cutter, also known as single disk, is a kind of disc cutter with only one cutter ring, which is mounted on the front and gauge area of the cutter head. It is mainly used as face cutter and gauge cutter to break hard rock with high uniaxial compressive strength (UCS≥70Mpa)...

Miércoles 13 abril 2022

IPX4 Waterproof Portable Battery-Powered Facial Cleansing Brush with Full Cleansing Kit Battery Operated Face ＆ Body Cleansing Kit SR-03G, this hot sale battery powered face cleanser can be used as a scrubber that provides facial massage and a cleanser that provides deep cleaning service...

Martes 12 abril 2022

Cantidad : 1200sets/y - Precio : USD10000-200000

Double heads CNC EDM has two separated spindles and controllers, travel of table is much bigger than regular big EDM machines, each head can do machining on its own. DMNC's large EDM machine is much heavier. A1470 Double Heads CNC EDM Sinker A1880 Double Heads CNC RAM EDM Machine...

Martes 12 abril 2022

Cantidad : 1200sets/y - Precio : USD10000-200000

CNC Die Sinker EDM Machine For Sale As a professional CNC EDM Die Sinker Machine manufacturer, we aim at providing you erosion machines with high quality. EDM sinker for sale is waiting for your contact with a warm welcome. We are available if you have any questions about spark...

Martes 12 abril 2022

Cantidad : 1200sets/y - Precio : USD10000-200000

CNC EDM drill, also known as small hole edm drilling machine, basically, there are three axis control(X, Y, Z), 4-axis control(X, Y, Z and W), 5-axis control(X, Y, Z, W and C), 6-axis control, (Y, Z, W, B, C) and even more. On the cnc edm drill machine, Z axis spindle servo stroke...

Martes 12 abril 2022

Cantidad : 1200sets/y - Precio : USD10000-200000

A1880 twin heads CNC spark edm machine has two separated controllers and two separated machine heads, three axis simultaneous control of each head and DMNC 5th generation wire cut electric discharge machining control system, best surface finish Ra≤0.2μm, Min. electrode wear ≤0.1%...

Martes 12 abril 2022

Cantidad : 1200sets/y - Precio : USD10000-200000

Wire Erosion Machines for Sale DMNC Provides Complete Solution Of EDM Machining Technology With 30+ Years' Experience, Continuous Innovation, Strict Quality Control, and Swift Service. The CNC EDM machine for sale can machine deep ribs faster with more precision, as the CNC incorporates...

Martes 12 abril 2022

As a professional cotton buds manufacturer with over 30 years of production experience, Winner Medical possesses a purified workshop to ensure the high quality and hygiene of our cosmetic cotton buds. Not only can we meet the customization demands in accordance with the needs of different...

Martes 12 abril 2022

H beam machine consists of an assembling machine, front welding machine, turn-over device, back welding machine and the transmission conveyors. It is used to assemble the H-beam,180°turn-over and transmit, etc. The annual welding capacity is 8000 tons. The Max welding speed can reach...

Martes 12 abril 2022

H beam shot blasting machine is designed and manufactured to clean the surface of the section steel. It is ideally suited for removing the rust, scale and contamination from the steel surface, which can make the surface clean, bright but with a certain coarseness. So the paint film...

Martes 12 abril 2022

Stepper motor pump is the most important part for a full unit peristaltic liquid pump, it is responsible to drive the suitable tubes to reach a specific range of flow volumes with the help of a stepper motor and driver in the back of the pump head. We offer several models of stepper...

Martes 12 abril 2022

Selector valve is a type of multiport selector valve with public port and dispensing ports around, the public port is used to inlet liquid while dispensing ports are used to distribute liquid one after another as the control program told them to a position in a specific port, it is...

Martes 12 abril 2022

The hose clamps plastic is new type structure fastener with strong mesh which is combined with various features of plastic and well-designed with precise tooth type structure to convert the acting force by adjustment of appearance structure. The hose clip plastic is common used new...

Martes 12 abril 2022

Peristaltic Tubing is a kind of biocompatible flexible tube in transparent, yellow or black colors, peristaltic hoses have strict tolerance requirements on inner diameters to ensure high precision flowing volumes for peristaltic liquid pump systems, they are mostly used in industrial...

Martes 12 abril 2022

Peristaltic Pump Heads is the most important part for a full unit peristaltic liquid pump, it is responsible to drive the suitable tubes to reach the specific range of flow volumes with the help of control units at the back such as motor and driver. As one of the professional peristaltic...

Martes 12 abril 2022

OEM peristaltic pumps transfer liquid through tubing which will not cause any cross contaminations, right pump head, right peristaltic tubing and right control unit will lead to successful applications. It is mainly used for liquid distribution, sampling, metering and filtering for water...

Martes 12 abril 2022

What Is BGA Machine Zhuomao is one of the best bga machine suppliers and bga rework station suppliers in China. BGA rework/repair station is what we called ball grid array rework station, also abbreviated as BGArs. BGA is a chip packaging technology, which is applied to improve the...

Martes 12 abril 2022

Precio : 100USD

Advantages 1. Good conductivity The current-carrying capacity of the welding head surface is almost the same as that of the metal conductor, with strong electrical conductivity. Experiments have proved that the rate of change of DC resistance ratio before and after welding is close to zero...

Martes 12 abril 2022

4 FLUTE, 0.2 MM END MILL, SMALL DIAMETER MILL CUTTER FOR STAINLESS STEEL Grain size 0.4micron Cutting dia. 0.2mm Grade BT60 Shank dia. 4mm Coating TiAlSiN Flute length 0.4mm Application Side milling Overall length 50mm Workpiece Stainless steel Shank ground h6...

Martes 12 abril 2022

Gas Processing Plant for Sale PCC has proven track record of providing comprehensive gas utilization solutions for onshore and offshore projects. Such solutions often ensure the implementation of innovative technologies packaged with global project management and execution expertise...

Martes 12 abril 2022

A New Age of 5G Is Just Beginning 25G SFP28 BIDI/LWDM/CWDM/DWDM transceivers for 5G front haul are available now. Optical Transceiver Types FTTH The notable technical feature of FTTH is that it not only provides greater bandwidth, but also enhances the transparency of the network to data formats...

Martes 12 abril 2022

Mechanical Properties Mechanical life: no-load plug>10000times Impact of external force: be able to afford 1m drop and 2tons vehicle run over pressure Insertion and extraction force: <100N</span> Electrical Performance Rated current: 13A/16A/20A/32A/60A Rated voltage:...

Sábado 09 abril 2022

Cantidad : 100-300 to - Precio : 4-10 USD

Aquaculture growth is driving production and creating increased challenges including disease management, food safety, pollution control, and cost efficiencies. Disease management is a key challenge when aqua ponds have high levels of fecal matter, decomposing feed material, and ultimately...