MANUAL - 6041 Anuncios

Sábado 29 abril 2023

HID Car Headlight Bulbs also named Xenon Bulbs High Brightness. 35W xenon lamp can produce 3200 lumens of bright light. Wide color temperature range. HID lamps can produce light with a color temperature of 4000-12000. long life. A set of HID lamps will gas discharge approximately 3000 hours...

Sábado 29 abril 2023

The auto ac expansion valve of the automotive air conditioner is installed at the entrance of the evaporator, and has two main functions. Throttle effect. After the high temperature and high pressure liquid refrigerant is throttled through the orifice of the auto ac expansion valve...

Sábado 29 abril 2023

Cantidad : 2000sets - Precio : 100-10000USD

BIRDSAT's new 80 cm KU band VSAT antenna is on board now. Higher reliability, lower cost and easy plug-in operation, staying connected with your family, friends and business partners, enjoying normal communication, entertainment and business, theidea is making offshore life easier...

Sábado 29 abril 2023

With the development of modern science and technology, industrial arm is a kind of high-tech automatic intelligent mechanical production equipment developed in recent decades. In the modern production process, Arm robots are widely used in automatic production lines, the research...

Sábado 29 abril 2023

Meter positions can be chosen from 3 - 48 (3, 6, 12, 20, 24, 40, 48pcs ) Precision：0.02%, 0.05%, 0.1% 1.AC Current Output：120A AC voltage output : 0-480V 2.Harmonic number: 2-51times/ Frequency：40Hz-70Hz 3.Communication Port: RS232; With auto PC control software 4.Self-check and...

Sábado 29 abril 2023

Cantidad : 30 sets - Precio : USD10,000-USD100,000

The pipe roll forming machine is a high-quality, high-efficiency rounding device for winding carbon steel, stainless steel and non-ferrous metal profiles (round tubes, angle steels, grooved steel, , etc.) into rings and flanges. The tube roll forming machine is one of the types of...

Sábado 29 abril 2023

Cantidad : 30 sets - Precio : USD10,000-USD100,000

Cold roll forming technology has been widely used for its energy saving, environmental protection and high efficiency. Highway guardrail machine products have also been widely used in many industries such as construction, bridges, vehicle manufacturing, container production, and machinery...

Viernes 28 abril 2023

Deli's high quality writing instruments offers values from different aspects of the business. Not only the stationery writing supplies themselves are great but also the corresponding service. Different Types Of Writing Instruments Gel Pen Gel Pen Refill Fountain Pen Desk Pen Stand...

Viernes 28 abril 2023

Waterproof Drone with Camera for Fishing Available to the United States and New Zealand Max Flight Time: 24 MIN Wind Resistance: 12 M/S Max Range: 1 KM Payload Capacity: 3KG SharkX Surf Fishing Drone with Bait Release Some Key Numbers: Unlock your fishing potential with Rippton...

Viernes 28 abril 2023

Model Overview The MOBULA is a waterproof fishing drone for professional fishing purposes. It consists of a drone (with a built-in fishing drone camera for spotting fish as well as a drone fishing line release), a controller with an LCD screen, and a mobile device clamp. The most...

Viernes 28 abril 2023

4 hoppers 800M RC range 3KG payload 2.5H battery life Up your fishing. GPS & Autopilot Plan your favourite spots with ease if you have a bait boat with autopilot autopilot function! Through Rippton app's bait boat autopilot function, you will be able to plan your pre-baiting spots...

Viernes 28 abril 2023

Cantidad : 1-50 tons - Precio : 1.7-3.5 usd/kg

This series of hot melt adhesive can bond the mirror and the metal or plastic. We have car rear mirror glue, car side mirror glass glue and car glue for mirror. Car Mirror Application This series of wholesale hot melt adhesive can bond the mirror and the metal or plastic. Our automotive...

Viernes 28 abril 2023

Cantidad : 1-50 tons - Precio : 1.7-3.5 usd/kg

This series of RH products are widely used in various textbooks, hardcover books, picture albums, manuals, magazines, etc., and book binding glue can bond coated paper and offset paper ranging from 80-200g. Hot glue book binding is divided into spine glue and side glue according to its purpose...

Viernes 28 abril 2023

Cantidad : 1-50 tons - Precio : 1.7-3.5 usd/kg

Automotive Carpet Adhesive This series of automotive bonding adhesive can bond the carpet in a car truck Automotive Carpet Adhesive Application This series of hot melt adhesive glue can bond the carpet in a car truck. Carpet Assmbly Glue in Car Truck Manual hot melt glue gun or semi-auto...

Jueves 27 abril 2023

1. What is equipment maintenance management software? Equipment management is an important job in the field of industrial manufacturing, even as important as production management. The traditional equipment management mode is to manually manage various records, and paper documents...

Jueves 27 abril 2023

The Role of Using Equipment Maintenance Management Software Ⅰ. What is equipped enterprise asset management? Equipment maintenance management software is a very general management information system. Using equip enterprise asset management can effectively manage equipment resources...

Jueves 27 abril 2023

Equipment Management Software is an Important Part of Hospital Management Ⅰ. The importance of hospital application equipment management software Hospital equipment management is a general term for the management of medical equipment purchase, installation, commissioning and acceptance...

Jueves 27 abril 2023

Ⅰ. Understand the equipment management software The cost of equipment maintenance and repair is often a confusing account for hospitals because there is no systematic management and analysis. In order to promote the scale and standardization of management and speed up the pace of...

Jueves 27 abril 2023

Monitor the whole process from work order creation, circulation, tracking, execution to completion, and each step and node status in work order circulation are clearly visible. EAMic® work order asset management software helps manage and control current and upcoming maintenance work...

Jueves 27 abril 2023

eam cmms eam cmms software eam/cmms solution Enterprise Asset Management Software (EAM/CMMS) EAMic® EAM CMMS software is not only an important IT tool for enterprises to manage all equipment assets, but also behind all maintenance data, EAMic® EAM CMMS system will allow all maintenance...

Sábado 22 abril 2023

Cantidad : 1-100,000 - Precio : $1-$10

This is the Copper CNC Lathing Parts recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 56mm*45mm Raw material: AL6061-T6 Surface Treatment: clear anodizing Finish: anodizing Large Part Machining Services 1. Parts up to 180″ x 90″ (CNC Controlled) 2...

Martes 18 abril 2023

Bohao is one of the top bakery mould manufacturers, Our custom silicone baking molds are safe to use in microwaves, ovens. Bakeware silicone molds are dishwasher safe. It's great for making cake, prepared food, chocolate, cookie etc. The raw materials used by Bohao baking mold factory...

Martes 18 abril 2023

This game with golf balls on strings is not only designed for children but also provides adults with the possibility of playing indoors to meet the leisure and entertainment needs of consumers of different ages. Outdoor golf ball string game consists of two parts, several ladder ball...

Martes 18 abril 2023

CHENZHU e stop safety relay are suitable for the application of emergency Stop button and safety gate. Support 2 safety output contacts (N/O) and 2 auxiliary output contacts (N/C) or 3NO+1NC or 2NO+2NC or 2NO+1NC+3NO(t)+1NC(t). Emergency stop relay can be operated in single or double...

Martes 18 abril 2023

Precio : USD 1.00 to USD 500.

The utility model relates to an LED light bulbs for outdoor fixtures, comprising a bulb head and LED bulbs. The bulb head is provided with a drive circuit and a heat radiator, wherein the heat radiator is provided with a bulb cover which is provided with a through hole the size of...

Martes 18 abril 2023

Plastic Injection Molds for Sale Packson is the OEM injection mold maker in china. We can supply custom injection molding parts. Our high quality and precision injection molding processes assist us to make molded parts from big, small to medium-sized components with good quality....

Martes 18 abril 2023

Used for fiber butt splicing fiber or fiber splicing pigtail, this is equivalent to making a splice, and the thing used for this kind of cold splicing is called an optical fiber cold splice. Two technologies can be used for the termination of the optical cable: fusion splicing and cold splicing...

Martes 18 abril 2023

SEALION supplies Horizontal Boring Mill for sale both 110mm and 130mm spindle, with or without the back column. Great cost performance is the main advantage of this hydrostatic moving column boring machine, it is always your best choice. Application Fields of CNC Horizontal Boring...

Martes 18 abril 2023

Sealion Machine Tool supplies both floor type and horizontal boring & milling machines. For the floor type boring machine, SEALION boring milling machine manufacturers offer you spindle size from 130mm up to 250mm, with or without square ram. It can work with a rotary table...

Sábado 15 abril 2023

Single side photosensitive ink coater is a new type of equipment that uses coating rollers to roll at the same time to coat a layer of photosensitive ink or glue and coating with specific functions on the surface of the substrate.The equipment has compact structure, stable performance...

Sábado 15 abril 2023

Male luer lock adapters provide a convenient way to connect soft tubing ID 1/16" to 1/4" with products that feature a female luer slip or luer lock end without the need for barbs or nuts, the material of medical grade PP ensure the high purity and suitable for non-corrosive liquid...

Jueves 13 abril 2023

Precio : 254,31 €

The Cellular Edge IoT Router R40 is an industrial-grade OpenWrt IoT device with multiple functions. It integrates an Industrial Router, Gateway, RTU, and DTU functionality in one unit. The highly cost-effective product simplifies IoT systems by reducing hardware connections and maintenance...

Jueves 13 abril 2023

Collimator: Control: Manual; Filter: 1.2mm Al; Light: LED lamp; Automatic SID laser reading; LCD screen value display UC Arm: FID: 465～1700mm, SID: 1000～1800mm, Rotation Range of UC arm: -30°-+120°, Rotation Range of Detector: -30°-+30° Key Features of DTP580 Digital Medical X-Ray...

Jueves 13 abril 2023

The Angell DP326 mobile x ray machine for sale is a portable X ray equipment that provides high-quality DR imaging and helps to speed up the examination workflow. Integrated with a 32kW high-frequency generator, digital detector, motor, and large batteries, this X ray mobile machine...

Jueves 13 abril 2023

Cantidad : Monthly pr - Precio : 200000-4 million

Fully Automatic solar laminator is the most important process in the whole solar panel production line. It is used to bond multiple layers of materials (Glass, EVA, Solar cell, Backsheet) together by heating &vacuum process in chambers of the laminator. Types of Fully Automatic...

Jueves 13 abril 2023

Cantidad : Monthly pr - Precio : 200000-4 million

Double-layer & single-chamber photovoltaic module laminator has a double layer, loading stage, one heating laminating stage, and unloading stage. Equipment Configuration and Features of Double-layer & Single-chamber PV Solar Module Laminator Control System Adopt Siemens PLC...

Jueves 13 abril 2023

Water activated tape is made from 100% recycled cork and contains a biodegradable natural starch adhesive that stays in the carton for recycling and penetrates the surface of the carton or package, allowing the tape to bond to the surface. This creates a very tight seal and ensures...

Miércoles 12 abril 2023

Cantidad : 50sets/mon - Precio : 80000~180000

This is a high-end CNC drilling machine for panel furniture, which has the advantages of high processing efficiency and a high degree of automation. The electric servo mechanical press can realize six-side position processing and front and back groove processing at a time. TY10 series...

Martes 11 abril 2023

FEDA es una empresa moderna de alta tecnología a nivel estatal que integra I + D, producción y ventas, que se enfoca en la fabricación de máquinas laminadoras de roscas, troqueles laminados de roscas, máquinas roscadoras automáticas, máquinas de tornos automáticos y cuencos vibratorios...

Martes 11 abril 2023

Horizontal form fill seal fruit packing machine, fruit wrapping machine has the same functions and ease of use as high-performance models. Because of its high-cost performance, our fruit packing equipment for sale can provide the most suitable packaging options for start-up companies...

Martes 11 abril 2023

Cantidad : 10000 - Precio : 100-500

The TJH-2 series parallel beam load cell are load cells in parallel. In addition to the conventional characteristics of other types of sensors such as high accuracy and easy installation, the biggest advantage of this series of sensors is that the mounting surface is leveled at four corners...

Martes 11 abril 2023

The double electric breast pump is compact and portable with a rechargeable battery and its lightweight design is easy to carry with you, whether to go to work, travel or run errands.Meanwhile it allows you to personalize and control your pumping time completely. It provides many...

Martes 11 abril 2023

Cantidad : 600,000 pi - Precio : USD2.0--USD10.0

Introduction A120isp: Premium plus type Low-pressure regulator with a push button in brass A120isp-1: Low-pressure gas regulator with G1/2 thread outlet in brass A121isp: Premium type Low-pressure regulator with 10mm outlet in brass A127isp: Snap On Compact Low-Pressure Regulator...

Martes 11 abril 2023

Precio : 10-30USD

Steel Wire Tube Brush Steel pipe brush has strong grinding force and is effective in removing rust, welding slag, paint and other attachments that are not easy to remove. It is often used for polishing and deburring the inner wall of metal holes. It is widely used in air conditioning...

Sábado 08 abril 2023

Cantidad : Manual Dis - Precio : Negotiable

HOTEC manual hand soap dispenser is leading in sanitation, and the products comply with high standard and pursue high quality. They are made out of durable material and comes in different kinds of shades, components, colors, materials and dimensions to meet different people's needs...

Viernes 07 abril 2023

SOLAR PHOTOVOLTAIC SUPPORT ROLLING MACHINE Double-in-roll c-shaped steel photovoltaic bracket is mainly applicable to the ground photovoltaic power station and concrete flat-roof photovoltaic power station. The bracket has a strong adjustable ability, high structural strength, beautiful shape...

Viernes 07 abril 2023

SINGLE SIDE MANUAL DECOILER Specifications of Single Side Manual Decoiler Capacity 2t/2.5t/3t/5t is optional Extension mode Manual Decoiling mode Powered/Unpowered is Optional Hangzhou Roll Forming Technology Co., Ltd has ready manual decoiler for sale in stock with cost-effective price...

Viernes 07 abril 2023

SINGLE SIDE HYDRAULIC DECOILER The regular hydraulic decoiler machine adopts a cantilever-type structure. It Includes a machine frame, cantilever type extension, decoiler driving system (by motor), Hydraulic system, and electric control system, Etc., with the function of installing...

Viernes 07 abril 2023

This series of shelf rack roll forming machine are mainly used to make metal shelf panels. We also call this profile the box profile. The size and material of the panel shelf can be customized in accordance with customers' own requests. Features and Advantages of Shelf Panel Roll...

Sábado 01 abril 2023

In order to let children learn to use the toilet independently, our infant potty training seat company has designed and developed a series of comfortable potty seat for this purpose. Such as baby potty, baby potty seat and baby potty seat with ladder. Our products meet the ergonomic...

Sábado 01 abril 2023

This product is mainly used to cut the materials like different kinds of rubber, plastic, plastic film etc. into small pieces so that they can be handled moreeasily. Whole system manual control makes sure the durability and simple operation. Pressure: 80tons Power: 15kw Baling Chamber Height...

Miércoles 29 marzo 2023

Topstar 8 Inch 5CCT Selectable Ultra-Thin LED Retrofit Recessed Ceiling Panel Down Light with Junction Box Recessed Slim Downlight. What is the Features of 8 Inch Recessed Slim Downlight? VERY BRIGHT AND STYLISH - ASD slim 8 inch recessed can light fixtures have an excellent light distribution...

Miércoles 29 marzo 2023

Cantidad : 500 Sets/M - Precio : $1000-200000

Seamark's 2D bga x ray inspection equipment adopts a closed microfocus X-ray tube with voltage 90KV, 110KV,130KV, which meet different product inspection technical requirements. At the same time, as one of the best industrial mini x ray machine manufacturers in China, Zhuomao uses...

Miércoles 29 marzo 2023

Cantidad : 500 Sets/M - Precio : $1000-200000

Zhuomao BGA rework station is one of the best cheap BGA rework station suppliers in China. First of all, what is BGA machine? BGA rework/repair station is what we called ball grid array rework station, also abbreviated as BGArs. BGA is a chip packaging technology, which is applied...

Miércoles 29 marzo 2023

Cantidad : 1200sets/y - Precio : USD10000-200000

Double Heads large edm machine Double heads CNC EDM has two separated spindles and controllers, travel of table is much bigger than regular big EDM machines, each head can do machining on its own. DMNC's large EDM machine is much heavier. A1470 Double Heads CNC EDM Sinker A1880 Double...

Miércoles 29 marzo 2023

Cantidad : 1200sets/y - Precio : USD10000-200000

ZNC Die Sinking EDM Machine ZNC EDM Sinker has X and Y-axis manual control, and Z-axis automatic control. It can do one single job after manually set position, and job setting is also manual. Ideal for molds and spare parts manufacturing industries, ZNC die sinking EDM machine for...

Miércoles 29 marzo 2023

Cantidad : 1200sets/y - Precio : USD10000-200000

Windows Platform CNC EDM Machine ADI series CNC EDM sinker has the latest control system at the platform Windows 7, efficiency is about 20-30% higher than previous DOS based control system. Types of windows EDM machines made by DMNC are listed below. ADI300 CNC EDM Machine With Manual...

Miércoles 29 marzo 2023

Cantidad : 1200sets/y - Precio : USD10000-200000

Small Hole EDM Drilling Machine For Sale Our edm drilling machine for sale are designed for the highest levels of accuracy, incredible reliability and high quality. Increasing productivity and saving time, small hole EDM machine provided by us is your best choice for drilling small hole...

Miércoles 29 marzo 2023

Cantidad : 1200sets/y - Precio : USD10000-200000

General Purpose CNC EDM Wire Cut Machine F Structure DK77 series high speed wire cut EDM has non-resistors HF power with Max cutting speed higher than 300mm2/min, Max cutting thickness is higher than 1000 mm. High accuracy linear guide way, ball screw and strong machine body with...

Miércoles 29 marzo 2023

KT series high performance turbines have shot blasting machine spare parts including blasting wheels provided with eight throwing blades locked into the wheel double-disc. The double-disc wheel offers the following advantages: Improved abrasive flow for faster cleaning cycles Direct...

Martes 28 marzo 2023

Biodegradable plastics refer to a kind of plastic that is degraded by natural microorganisms such as bacteria, fungi, and algae. The ideal biodegradable plastic is a kind of polymer material with excellent performance, can be completely decomposed by environmental microorganisms after waste...

Sábado 25 marzo 2023

Cantidad : 12000 tons - Precio : 2.5-6.8

fluorocarbon coating market fluorocarbon surface technologies and fluorocarbon vs fluorocarbon coated fluorocarbon polymer & surface technologies / fluorocarbon surface technologies The high molecular polymer formed by the polymerization of fluoro olefin or the copolymerization...

Viernes 24 marzo 2023

Monitor the whole process from work order creation, circulation, tracking, execution to completion, and each step and node status in work order circulation are clearly visible. EAMic® work order management software helps manage and control current and upcoming maintenance work easily...

Viernes 24 marzo 2023

EAMic® systems provides EAM/CMMS solution for a variety of industries. Manufacturing EAMic® CMMS is your must-to-have tool for your daily maintenance management work. EAMic® CMMS can help all maintenance fleet improve efficiency: Fold your time (reduce the time to search), release...

Viernes 24 marzo 2023

Pigeon developed and manufactured lightweight and durable infant resuscitator that can safely inflate the baby's lungs and provide optimum oxygenation by delivering consistent PIP with each breath avoiding the risks associated with under or over inflation at uncontrolled pressures...

Viernes 24 marzo 2023

Enterprise Asset Management Software (cmms eam) EAMic® cmms eam software is not only an important IT tool for enterprises to manage all equipment assets, but also behind all maintenance data, EAMic® EAM asset management will allow all maintenance personnel to be seen and heard. Have...

Viernes 24 marzo 2023

The connecting rod hardness eddy current sorting machine has a calibration device, input compensation parameters, automatic/manual temperature compensation and light intensity compensation, and automatic temperature measurement and temperature correction. The digital potentiometer...

Jueves 23 marzo 2023

As a professional manual wheelchair factory,china manual wheelchair are more traditional, they are defined by their two large wheels in the back, where a user can self propel using hand-rims. We recommend two popular manual wheelchairs for your reference, YM119 and YM120. What You...

Jueves 23 marzo 2023

As one of the professional wheelchair accessories manufacturers and suppliers, we offer a wide range of accessories for walkers and wheelchairs to use. The manual electric wheelchair accessories and supplies are mainly for the convenience of users to maintain the wheelchair (such as wheels...)

Jueves 23 marzo 2023

As a professional manual wheelchair factory, china manual wheelchair are more traditional, they are defined by their two large wheels in the back, where a user can self propel using hand-rims. We recommend two popular manual wheelchairs for your reference, YM119 and YM120. What You...

Jueves 23 marzo 2023

X-RIDER china folding scooter has compact and foldable design, remote folding and manual folding available. To fold it through pressing the button of the remote control, the locomotive that can be adjusted up and down, foladable chair, and hidable batter are the highlight of this kind of scooter...

Jueves 23 marzo 2023

This category Honeycomb Cutter includes all kinds of machines that cut honeycomb products into different shapes, including Honeycomb Paper Core Expander, Honeycomb Paperboard Slitting Machine, Honeycomb Board Die Cutting Machine, etc. Honeycomb paper core expander can expand honeycomb core...

Miércoles 22 marzo 2023

Screw Making machine is a kind of special machine which makes metal wire into screw, bolt, nut and other standard parts. Cold Heading Machine Metal Tech is committed to producing fully functional cold heading machines. The cold heading machine is mainly used for the head forming of...

Miércoles 22 marzo 2023

Chain link fencing jali machine can be called Diamond wire mesh as well. there are four types of fully automatic chain link fencing machines: 1. Double wire chain link fence machine, single wire chain link fence machine, double wire double mold chain link fence machine, and manual...

Martes 21 marzo 2023

Monitor the whole process from work order creation, circulation, tracking, execution to completion, and each step and node status in work order circulation are clearly visible. EAMic® work order software helps manage and control current and upcoming maintenance work easily and efficiently...

Martes 21 marzo 2023

EAMic® systems provides EAM/CMMS solution for a variety of industries. Manufacturing EAMic® CMMS is your must-to-have tool for your daily maintenance management work. EAMic® CMMS can help all maintenance fleet improve efficiency: Fold your time (reduce the time to search), release...

Lunes 20 marzo 2023

Enterprise Asset Management Software (cmms eam) EAMic® cmms eam software is not only an important IT tool for enterprises to manage all equipment assets, but also behind all maintenance data, EAMic® EAM asset management will allow all maintenance personnel to be seen and heard....

Lunes 20 marzo 2023

Enterprise Asset Management Software (cmms eam) EAMic® cmms eam software is not only an important IT tool for enterprises to manage all equipment assets, but also behind all maintenance data, EAMic® EAM asset management will allow all maintenance personnel to be seen and heard....

Sábado 18 marzo 2023

C3-42 is a single layer-four conveyor deck roller unit load carrier AGV, which can automatically dock with the production line or transmission line connecting platform at both ends and both sides and can rotate and move sideways in situ. Core Advantages of C3-42 Monolayer Four Station...

Sábado 18 marzo 2023

C2-31 Omni-directional Latent Lifting AGV can move to the bottom of the material trolley, lift the material trolley and move to the destination. In addition, the lift AGV also has an in-situ rotation function. You can choose QR code navigation or magnetic strip daohang according to...

Sábado 18 marzo 2023

Electric pruning tools, also called electric cutting shears or electric garden shears use rechargeable batteries and high-power brushless motors and these battery powered pruning shears are widely used in gardens, nurseries, and other scenes. Just press the trigger of the electric...

Sábado 18 marzo 2023

Electric pruning shears types Suca electric pruning tools break the tool mode of the traditional manual pruning tool. They all have an ultra-light body, which eliminates the hard work of pruning branches. Buying an electric pruning tool can save your working time and improve work efficiency...

Sábado 18 marzo 2023

SC-3608 electric bush lopping shears are suitable for pruning branches of 40mm and below in orchards and vineyards. The efficiency of hand held pole pruning shears is 8-10 times that of a traditional manual pruning machine, and the pruning efficiency is much higher than that of a...

Sábado 18 marzo 2023

Reliable Air Cushion Machine Manufacturer Offers Efficient and Innovative Air Cushion System Solutions Locked Air® is a globally trusted air cushion machine manufacturer with satisfied customers worldwide. We supply inflatable packaging and paper packaging products to whoesalers and...

Sábado 18 marzo 2023

Bruide is a professional automotive tool set manufacturer in China. We can supply you with a wide range of auto tools such as engine tools, engine timing tools, and brake tool kits for working on electric and hybrid cars. We offer a full range of traditional auto hand tools, also...

Viernes 17 marzo 2023

Cantidad : 50 set/one - Precio : 800usd~200000usd

What is Plastic Welding and What is Plastic Welding Used for? Plastic pipe welding machines & cutting machines are necessary for metal pipe procedure. The welding machine for plastic pipe can cut plastic pipe fittings into different angles according to the needs of customers....

Viernes 17 marzo 2023

As 1.6 cu ft portable washer, it is a small but powerful washing machine, can easily wash your clothes. The 1.6 cu ft washing machine is designed to make your life easier: it's very easy to set up, use and relocate to wherever you need it. Featuring 6 of the most commonly used programs...

Viernes 17 marzo 2023

Laundry always become a problem if you do not own a washing machine for yourself. Laundromat can not guarantee the safety of your clothes and public washer always seems to far from your apartment. Well, now this little comes and do all the magic for you! It's space-efficient with its tiny size...

Viernes 17 marzo 2023

Cantidad : 100 - Precio : 0.5-50

LG 18650 F1L 7S10P 25.9V 33.5Ah li ion battery packs with PVC for sale. The LG INR18650 F1L battery dimension, PCB, wire length, connectors can be adjusted according to your request. Contact now! 7S10P LG INR18650-F1L 25.9V 33.5Ah lithium ion pack is a customized battery with LG INR18650F1L 3...

Jueves 16 marzo 2023

Precio : 1-10usd

Great Power has accumulated and precipitated battery technologies on the lithium-ion truck lithium battery over the years, battery module structuring, energy density, safety performance, lifespan, consistency and airtightness, and compression and vibration reduction performance are...

Jueves 16 marzo 2023

In the fields of oil and gas, mining, forestry, and ocean transportation, due to the lack of communication infrastructure, IoT data cannot be transmitted through traditional optical fiber, 4G, or other communication networks. The only solution is to transmit IoT data through satellites...

Miércoles 15 marzo 2023

GHD-220 multi-function automatic high-speed cartoning machine is made of a series of precision gear and devices, all the work like drawing carton, opening carton, drawing specification, wrappage filling, batch number print, and carton closing can be finished one time, completely...

Sábado 11 marzo 2023

Horizontal form fill seal fruit packing machine, fruit wrapping machine has the same functions and ease of use as high-performance models. Because of its high-cost performance, our fruit packing equipment for sale can provide the most suitable packaging options for start-up companies...

Sábado 11 marzo 2023

Horizontal form fill seal fruit packing machine, fruit wrapping machine has the same functions and ease of use as high-performance models. Because of its high-cost performance, our fruit packing equipment for sale can provide the most suitable packaging options for start-up companies...

Viernes 10 marzo 2023

Raykol Auto GDA series Automated graphite digester is designed based on wet digestion theory, it can automatically complete full digestion process including acid adding, mixing, capping, programmed digestion, acid elimination and cooling. Up to 72 samples can be digested automatically...

Viernes 10 marzo 2023

Precio : 1-10usd

MANUAL RESET PRESSURE SWITCH Egret BLPS-YKM series of manual reset pressure controllers are suitable for overpressure protection of all types of air conditioning and refrigeration systems. When the system pressure is above the rated security pressure, the pressure induction disk within...

Viernes 10 marzo 2023

VJ-H Series is a simple industrial dust collector with large air volume, stable and reliable mechanical structure, small footprint, and flexible movement. Features of VJ-H Series Manual Cleaning Type Industrial Dust Collector Horizontal filter installation mechanism can reduce the...

Viernes 10 marzo 2023

VILLO dust removal solutions are used globally to benefit human health, increase performance and reduce energy consumption in a wide range of air filtration applications. Types of airflow dust collector Manual Cleaning Dust Collector Large-scale dust removal system, the characteristics...

Viernes 10 marzo 2023

All-around sheet fiber iron laser cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Function Enhancement All Cover Platform Stainless Steel Cutter Machine P Series 10kW+ Cutting Process Package...

Sábado 04 marzo 2023

Precio : 100USD

Xin Pin is dedicated to providing high-quality and low-cost customized products. The following are some of our experiences of making the products for your reference. If you have the new design and the new custom demanding, please send us 2D and 3D drawings, we will send you the quotation...

Sábado 04 marzo 2023

Precio : US$1.00

HID Headlight Bulb also named Xenon Bulbs High Brightness. 35W xenon lamp can produce 3200 lumens of bright light. Wide color temperature range. HID lamps can produce light with a color temperature of 4000-12000. long life. A set of HID lamps will gas discharge approximately 3000 hours...

Sábado 04 marzo 2023

Cooperate with B-end users and clinics to help users get pregnant quickly, give birth and good education in the mode of "intelligent hardware products + subscription service", and create one-stop natural pregnant digital health management products and services solutions. Intelligent...

Sábado 04 marzo 2023

CNXD main products are all kinds of TV mounts and TV carts, we supply custom made tv mounts and support various degrees of OEM customization. CNXD has been committed to the production and sales of TV accessories since 1997. We have more than 20 years of production experience and nearly...

Viernes 03 marzo 2023

Precio : 100000-500000USD

Girder Carrier carrying capacities of 120T, 160T, 180T, 220T, 250T, and 300T that can be used directly to feed girder to bridge launcher and coordinate cross hole of bridge crane, featuring self-propelled, concrete girder without limitation of length, user- friendly operation, and maintenance...

Viernes 03 marzo 2023

Precio : $0.16-$3

The selection of china serological pipette is made of high-quality polystyrene materials, which are suitable for disposable laboratory consumables for liquid transfer during cell culture and microbial culture, and are used with electric large-capacity pipettes or manual pipettes....

Viernes 03 marzo 2023

Cantidad : 5000 Sets/ - Precio : US $10-500/ Piece

Balancing valve working principle is about how balance valve works. Balance valve is a dynamic and static balancing valve under hydraulic conditions, such as static balance valve, dynamic balance valve. Valve body material: cast iron, cast steel .work pressure is 0.6-4.0MPA. The working...

Viernes 03 marzo 2023

Cantidad : 5000 Sets/ - Precio : US $10-500/ Piece

Water is among the world's most essential natural resources. Just as it aids in the development of human life and agricultural products, water is utilized to support various industrial processes such as heating, cooling, and sterilization. Transportation, management and treatment...

Viernes 03 marzo 2023

Cantidad : 5000 Sets/ - Precio : US $10-500/ Piece

MstnLand, as a professional cast iron gate valves manufacturers, provides high performance gate valve products, mainly include bolted bonnet wedge gate valves and pressure seal bonnet gate valves, which are widely used in gas, petrochemical, oil, offshore, power station and refining industries...

Viernes 03 marzo 2023

Precio : 3000-20000USD

automated warehouse robots / autonomous mobile robots warehouse autonomous robots in warehouses / automated robots in warehouse autonomous warehouse robots / warehouse autonomous robots Automated warehouse robots are mainly used to solve the tedious work of warehouse goods sorting...

Viernes 03 marzo 2023

Cantidad : 100000pcs - Precio : USD10-200.00

Model N.W(KG) SIZE(CM) CHB025 0.29 19 10 9 Properties of renault koleos cvt transmission The Renault Corvette transmission is a new generation CVT8 analog 7-speed manual transmission. The transmission features new lightweight technology that optimizes belt size and oil pump...

Viernes 03 marzo 2023

Precio : 0.1-200USD

The half inch pex ball valve and 1 inch pex ball valve provided by Carbo, a professional pex ball valve factory, has good wear resistance. The reason for the OEM ball valve wear resistance is that the valve core when it is sealed is welded with alloy steel, and its sealing ring...

Jueves 02 marzo 2023

Acrel electrical overload protection devices provide solutions for 0.4kv-35kv power distribution system, which include programmable panel energy meter, dc energy meter, remote terminal unit, smart motor protector relay, temperature and humidity controller, medium voltage protection relay...

Miércoles 01 marzo 2023

888S precision counting scale with high precision load cell, can be measured more accurately. In addition to the functions of ordinary weighing scales, the counting scale can also use its counting function to quickly and easily count, which has the incomparable advantages of traditional...

Miércoles 01 marzo 2023

Counting scale for small parts is an electronic scale with counting function. This electronic scale can measure the number of heavy objects. counting scales normally have a certain storage capacity, which makes them an irreplaceable tool for professional use. Specifications of 666S...

Miércoles 01 marzo 2023

Model 128 Price piece counting with aluminum frame, more stronger and precise. When weighing and counting large amounts of small industrial parts, counting scales provide a great, time-saving service that can expedite the inventory process for manufacturing and industrial facilities...

Miércoles 01 marzo 2023

CP indoor lcd display is widely used everywhere, it attracts fans by its own excellent performance. With scenario customized design, our floor standing LCD display can meet all commercial requirements from customers, by using the different treatment on toughened glasses / tempered glasses...

Miércoles 01 marzo 2023

Precio : 1000-6000USD

Technology Specification: The design meets the requirement of API SPEC 6A. Nominal bore: 21/16″-41/16″ Rated working pressure: 2000-20000PSI Rated working temp: K、L、P、R、S、T、U、V Material class: AA, BB, CC, DD, EE, FF Product specification level: PSL1-PSL3G Performance requirement level...

Martes 28 febrero 2023

We developed the discharge furnace robotic arm, based on the working process and tools of manual operation of slag port opening and closing of the copper smelting furnace. It has the function of a 7-axis linkage. Taking the horizontal centerline of the furnace as the reference, it...

Martes 28 febrero 2023

Automatic Drilling and Tapping Machine The manipulator is applied to the opening and plugging of the slag port in a copper smelting furnace. According to the copper smelting furnace slag port manual operation process and used tools, we developed hole digging robotic arm, which uses...

Martes 28 febrero 2023

Dig furnace robotic industrial arm has a walking mechanism, multi-station operator, hydraulic, electronic control, and other components. The operation is simple and practical. We can design and manufacture the hole digging robotic arm with different functions according to different...

Sábado 25 febrero 2023

Cantidad : 100000 - Precio : $2-$5

This silicone citrus juicer is very easy to use.You can easily take out your citrus press for that extra touch in your food or cocktail and simply put it in the dishwasher. No matter you are in the kitchen or the bar, this manual silicone lemon squeezer and other small citrus fruits...

Sábado 25 febrero 2023

Cantidad : 100000 - Precio : $2-$5

Using aluminum alloy material + powder, to create a thick texture lemon press. It' s thick and durable, corrosion resistant, high hardness. The thread of the press groove is evenly distributed, the cut surface of the fruit is downward, the juice is easily discharged and the pressing...

Jueves 23 febrero 2023

Lug butterfly valve has simple structure, small volume, light weight, and has good fluid control characteristics. Its disc is installed in the diameter direction of pipeline, so the valve can be quickly opened and closed by rotating its disc 90 degrees. The wafer body is easy to be...

Jueves 23 febrero 2023

Gear operated valve regulates the flow of liquid or gas. The disc of the worm gear operated butterfly valve is installed in the diameter direction of the pipeline. In the cylindrical passage of the butterfly valve body, the disc-shaped butterfly disc rotates around the axis and the...

Miércoles 22 febrero 2023

These is the Rapid Prototype Machined Parts Machining parts recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 34mm*53mm Raw material: AL6061-T6 Surface Treatment: clear anodizing Finish: anodizing Specifications of Professional CNC Prototype Machining...

Miércoles 22 febrero 2023

Coke dry quenching is a kind of coke quenching method using inert gas to cool the red coke. During the dry quenching process, the red coke is loaded from the top of the coke dry quenching furnace. The low temperature inert gas is blew into the red coke layer of the cooling section...

Miércoles 22 febrero 2023

Pump with a wide range of mechanical seals, different models, but there are five major leaks: Seal between sleeve and shaft; Seal between movable ring and shaft sleeve; Dynamic and static ring seal; The seal between the static ring and the static ring seat; Seal between the end cap...

Miércoles 22 febrero 2023

Nowadays, medical technology is constantly advancing, even the suturing of wounds is helped by the machine. Suturing and stapling instruments sare particularly frequent in some gastrointestinal surgeries. But a lot of people say it was hand-stitched before, very doubt whether the...

Martes 21 febrero 2023

Precio : $30-$400

In order to choose the right TFT LCD screen for medical applications, engineers and decision makers need to fully understand how the specifications of the TFT LCD screen affect the final product. It is also important to understand the difference between medical tft display and industrial...

Sábado 18 febrero 2023

Precio : 100USD

BBT Medical Harmonic Scalpel BBT Medical ultrasonic scalpels are mainly used for soft tissue cutting and coagulate blood vessels less than 5mm in laparoscopic surgery. Available in 4 shaft lengths 45cm,36cm,23cm and 14cm for you choose. Superior to electrosurgery in that it can cut...

Sábado 18 febrero 2023

As a led TV movable stand for various TV sizes, including 32 inch tv floor stand, 40 inch, and 43 inch, WH3780 has manual height adjustment and premium rolling casters. Specification of WH3780 70 Interactive Display Mobile Cart Simple Item WH3780 Display size Fits for 32"~70"display...

Sábado 18 febrero 2023

Belonging to the category of portable TV stand on wheels, WH3301-M has two types: one is a 50 inch TV swivel stand and the other is a 60 inch TV stand with swivel mount. Specification of WH3301-M 60 Interactive Display Mobile Cart Simple Item WH3301-M Display size Fits for 42"-60"display...

Sábado 18 febrero 2023

Belonging to the category of portable TV cart, WH3301-L is a well-designed 50 inch TV floor stand. Specification of WH3301-L 86 Interactive Display Mobile Cart Simple Item WH3301-L Display size Fits for 55"-86"display screen VESA pattern range 200*200mm-800*600mm Load capacity...

Sábado 18 febrero 2023

The globe valve, also called the gate, is one of the most widely used valves. The reason why it is popular is that the friction between the sealing surfaces is small during the opening and closing process, it is more durable, easy to manufacture, the opening height of it is not large...

Sábado 18 febrero 2023

Petrochem Valve Types of Fuel Valve Weidouli has a wide range off-ball, gate, globe, and check valves which are supplied to the Petrochemical market with materials variety of Hastelloy, alloy 20, monel etc. Also bellow sealed gate and globe valves or pressure seal bonnet construction structures...

Sábado 18 febrero 2023

Precio : 5000-50000USD

SAIGAO GROUP offers a full range of valves for drilling and production operations. Gate valves are designed and manufactured in accordance with API 6A latest edition PSL 1-4 while the robust, simple and reliable gate and seat design promotes ease of service with in-line maintenance...

Sábado 18 febrero 2023

The DGD-300C-1 is an all-in-one economical electrosurgical dental cautery machine for clients with limited budgets. Monopolar and bipolar functionalities make it suitable for various clinical applications. Key Features of DGD-300C-1 Cautery Machine for Dental Unique P.A.C system automatically...

Sábado 18 febrero 2023

DGD-300B-2 Series Electrosurgical Generator The DGD-300B-2 Series is an all in-one economical electrosurgical generator for clients with limited budgets. Monopolar and bipolar functionalities make it suitable for various clinical applications. Key Features of DGD-300B-2 Series Electrosurgical...

Viernes 17 febrero 2023

The series of metal roof ridge cap machine are mainly used to make ridge capping. Ridge capping is a critical part of the structure of a roof. Ridge capping is placed along the peak of a roof to cover where the roof sheets meet. Roll-top ridge capping is a rolled product that is made...

Viernes 17 febrero 2023

This series of metal tile roll forming machine is used to make metal roofing tiles. Mainly including a step-pressing system, our steel roofing machines can effectively press the metal panels formed by the roll forming system. As one of the mature glazed tile roll forming machine suppliers...

Viernes 17 febrero 2023

Cantidad : 500pcs - Precio : 87-292 USD

The "reefer container monitoring system" of CIMC Intelligent Technology Co., Ltd. is used in reefer container yards and terminals. A "Reefer Container Monitoring System" host can monitor 24 reefer containers, the monitoring plugs and protocols are automatically adapted, and it can...

Viernes 17 febrero 2023

Cantidad : 500pcs - Precio : 87-292 USD

Container Tracking Solutions Conveniently installed in the container ventiLalation hole, Keep original intelligent container structure;Acquiring the location and status data of the container with Internet of Things technology, Optimize container management business Reefer Container...

Viernes 17 febrero 2023

Precio : 1000-6000USD

From the earliest manual control of elevators to today's chip control, in the more than 100 years of history after the elevator was born, the elevator control technology has undergone earth-shaking changes. Today, the integrated elevator controller has become the mainstream in the...

Jueves 16 febrero 2023

Cantidad : 30 sets - Precio : USD10,000-USD100,000

Cable trays are becoming more and more widely used in modern buildings. Traditional manual production can no longer meet the demand, and the industry urgently needs the input of automated production lines to increase production/reduction of artificially improved product quality and...

Jueves 16 febrero 2023

Durkeesox is an integrated A/C Duct integrated solution provider with a complete set of product portfolio. Insusox system is a pre-insulated air duct system serving as an air transmission duct above the ceiling. System Selection Air transmission duct Air dispersion duct Air transmission...

Miércoles 15 febrero 2023

Cantidad : 30set/Mont - Precio : 1000USD-40000USD

CCTV pipe inspection robot, as the most effective and accurate tools to access the pipeline, play a very important role in the sewer and drainage industry. With state-of-the-art technology, Easy-Sight CCTV pipeline robot can provide best-quality inspection with HD video and images...

Miércoles 15 febrero 2023

Cantidad : 100 - Precio : 25000-300000USD

Golden Laser CNC laser cutting machine types vary from thin tubes to thick tubes, small tubes to large tubes, regular shape tubes to special-shaped tubes, or standard cnc laser cutter pipe cutting machine types to custom models, and more. As a leading famous cnc laser tube cutting...

Miércoles 15 febrero 2023

Cantidad : 3000UNITS - Precio : USD10000-100000

MANTEN cargo truck china includes light type, heavy type and off-road type, supporting high-efficiency logistic transportation of large fields, such as bulk goods, e-commerce, express, shops, medicals,etc. Its loading capacity varies from 1ton to 40ton, and the dropside type, van...

Miércoles 15 febrero 2023

Cantidad : 3000UNITS - Precio : USD10000-100000

Car carrier truck is a vehicle for transporting cars. According to the structure of the car carrier lorry there are three models, respectively for the twin bridge twin tire, twin bridge single tire, single bridge twin tire; According to the appearance is divided into skeleton, semi-closed...

Miércoles 15 febrero 2023

Cantidad : 3000UNITS - Precio : USD10000-100000

Bulk feed truck is mainly used for feed mill to livestock farms and poultry farms and feed processing users or transport bulk feed finished feed production of raw grain, at the same time it can also be used to transport some non-corrosive powder granular raw materials, such as pharmaceutical...