REDUCING - 3775 Anuncios

Miércoles 18 octubre 2017

Brief Introduction. This series reducing valve is pilot piston type reducing valve, mainly composed of main valve and pilot valve. The main valve consists of valve seat, main valve disc, piston, cylinder sleeve, and spring. The piston valve consists of valve seat, valve flap, membrane...

Miércoles 18 octubre 2017

Brief Introduction. This series reducing valve mainly composed of valve body, valve seat and valve flap. It adopts the structure of double valve seat and double cone valve flap. It adopts pressure balancing valve flap. Realize remote control and auto control through valve flap elevation...

Miércoles 18 octubre 2017

Brief Introduction. This series reducing valve is direct action membrane type spring reducing valve, mainly composed of membrane, adjusting spring, valve seat and valve flap. It sense the change of lower stream pressure through the membrane and drive the valve flap, change and control...

Miércoles 18 octubre 2017

Brief Introduction. This series reducing valve is direct action membrane type spring reducing valve, it is manufactured and designed on the basis of advantages of foreign same products. It is mainly composed of membrane, valve flap, and adjusting spring. It sense the change of lower...

Miércoles 18 octubre 2017

Brief Introduction. YB43X is Proportion type pressure reducing valve,as its floating piston ends have different cross-sectional area,there will be a fixed pressure differential between the valve inlet and outlet,thereby change the outlet pressure conditions,achieve the purpose of decompression...

Miércoles 18 octubre 2017

Brief Introduction. This series reducing valve is pilot piston type reducing valve, mainly composed of main valve and pilot valve. The main valve consists of valve seat, main valve disc, piston, cylinder sleeve, and spring. The piston valve consists of valve seat, valve flap, membrane...

Miércoles 18 octubre 2017

Brief Introduction. This series reducing valve is direct acting bellows pressure reducing valve, It is mainly composed of bellows, adjusting spring, valve seat and valve flap. It sense the change of lower stream pressure through the bellows and drive the valve flap, change and control...

Miércoles 18 octubre 2017

Brief Introduction. This pressure reducing valve is robust direct acting bellows pressure reducing valve designed for use on steam,air and inert industrial type gases.The valve is available in four nominal sizes: DN25,DN32 ,DN40 and DN50. Set the outlet pressure through adjusting spring...

Miércoles 18 octubre 2017

Brief Introduction. RP-6 high-sensitivity steam pressure reducing valve is pilot piston type pressure reducing valve mainly used for steam.The product made following improvement on the basis of normal pressure reducing valve, enlarge the piston area, change the throttle structure...

Miércoles 18 octubre 2017

Brief Introduction. This series reducing valve is pilot piston type reducing valve for steam, mainly composed of main valve and pilot valve. The main valve consists of valve seat, main valve disc, piston, cylinder sleeve, and spring. The piston valve consists of valve seat, valve flap...

Miércoles 18 octubre 2017

Brief Introduction. Y14H/F Direct Acting Bellows Pressure Reducing Valve is newly improved product based on MIYAWAKI. This Direct Acting Bellows Pressure Reducing Valve material is Stainless steel, which can be used for some corrosive medium, it can also be used for Air, Steam, etc...

Miércoles 18 octubre 2017

Brief Introduction. DP27 Pilot Operated Pressure Reducing Valve is the new type pilot extra-huge membrane pressure reducing valve developed by our company,similar to Spirax Sarco Design. It is greatly improved on basis of normal pressure reducing valve. The membrane use new material...

Miércoles 18 octubre 2017

Brief Introduction. DP17 Pilot Operated Pressure Reducing Valve, similar to Spirax Sarco Design, mainly used for steam system to reduce pressure, which is superior to normal piston type steam pressure reducing valve. This Pilot Operated Pressure Reducing Valve has another prominent features...

Miércoles 18 octubre 2017

HCN Low Noise Cage Type Regulating Valve is mainly designed for reducing the medium noise. As the gas will expand, many Symmetric holes were designed to reduce pressure drop. The flow port is S pattern, and the flow-guiding part around the cage can also make the fluid flow smoothly...

Martes 17 octubre 2017

C5126E Single Column Vertical Lathes 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking...

Martes 17 octubre 2017

C5123E Single Column Vertical Lathes china 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking...

Martes 17 octubre 2017

C5120E Single Column Vertical Lathe china 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking...

Martes 17 octubre 2017

C5116E Single Column Vertical Lathe , the picture is the product exported to the USA. 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the...

Martes 17 octubre 2017

C5112E Single Column Vertical Lathe 1.The super-high quality and mass remarkably surpass the domestic first-class factories. 2.The beam guide and ram guide are handled by supersonic frequency induction hardening (HRC≥50) while the sliding surface of guide is treated with sticking...

Martes 17 octubre 2017

Used to determine the static conditions of the fabric in the form of friction in the laboratory conditions. The sample was charged with a predetermined friction material, and the potential of the sample after the injection of the Faraday tube was measured, and the charge amount per...

Viernes 29 septiembre 2017

Cantidad : 100/year - Precio : factory price

Main Procedures of Feed Pellet Line Material crushing→material mixing→extruding process→pellets drying→oil spraying process→pellets cooling→pellet packing Our fish feed production line is equipped with advanced feed equipment, which can produce kinds of quality feed pellets for aquatic...

Miércoles 27 septiembre 2017

Production of high-quality organic granular fertilizer is a complex task as the process is subject to various factors: variety and quality of raw materials, composition and compatibility of material formulation, moisture content and its variation during the granulation process, quality...

Sábado 23 septiembre 2017

Used to determine the static conditions of the fabric in the form of friction in the laboratory conditions. The sample was charged with a predetermined friction material, and the potential of the sample after the injection of the Faraday tube was measured, and the charge amount per...

Sábado 16 septiembre 2017

Cantidad : 200pcs/yea - Precio : 5000usd

P1 Dental Laser 10W 980nm The traditional infrared diode is proven and widely used in laser dentistry for reducing germ level in periodontology, endodontics and other applications like aphthous ulcers and teeth whitening/bleaching. Unprecedented blend of Art & Technology Fatigue-free...

Sábado 16 septiembre 2017

Cantidad : 200pcs/yea - Precio : 8000usd

P1 Blue Dental Laser PIOON is one of the few companies that really have Blue diode technology, clinical data support, and fully connected service capabilities. We are pleased to bring you the Revolutionizing dental laser systems, which will provide you the comprehensive dental applications...

Viernes 15 septiembre 2017

INTELLIGENT AUTOMATIC BOTTLE UNSCRAMBLER Product speed（b/h）：15000/20000 Power（KW）：3.0 Voltage（v）：220 Suitable for bottle diameter（mm）：28-125 Dimension（mm）：φ2200*2100/φ2400*2300 Weight（KG）：1550/1850 Introduction: This machine adopts advanced technology,PlC intelligent control,and...

Jueves 14 septiembre 2017

Description 1. The design meets EU international standards.The fuselage eliminates internal stress by annealing and ensures higher precision and strength All machines are designed using SOLID WORKS 3D programming and made with enhanced ST44-1 quality steel with the latest technology...

Jueves 14 septiembre 2017

Hydraulic presses are commonly used for forging, clinching, moulding, blanking, punching, deep drawing, and metal forming operations. Besides metal sheet, wooden plate, powder also can be processed. It is very popular in daily necessities, automobile manufacturing industry. Three-beam...

Martes 12 septiembre 2017

Cantidad : 100sets - Precio : $23000

1.1 Product features This series of ball mill is a new type of ball mill improved on the bases of old mill. It has the following features. 1.1.1 Large diameter double row self-aligning roller bearings are adopted instead of the original sliding bearing, greatly reducing the friction...

Martes 05 septiembre 2017

Product Model: PTFE hose paste making extruder machine Flow Chart Paster Extrusion tube process: PTFE Fine Powder raw material→Sifting→Mix with solvent→Heating→Preforming→Extrusion→Sin tering→Finished Tube. Matched machine: Machine screening, Mixing machine, Preforming machine, Extruder machine...