SILICONES - 3325 Anuncios

Lunes 07 marzo 2016

Cantidad : 60T/MONTH - Precio : 8.2 USD/KG FOB HUANG

1.description Platinum Cure Molding Silicone is a two parts kinds liquid silicone, which can cured on room temperature. which mainly used for mold making of concrete, stone , jewelry casting,, tire molding ,rapid protyping , vacuum foaming, any condensation silicone can used for...

Domingo 06 marzo 2016

Cantidad : 60t/month() - Precio : usd 6.3 FOB huangpu

1.description Platinum cure electronic potting silicone rubber is two parts with low viscosity, and it can be cure d completely at room temperature.platinum cure electronic potting silicone rubber is with stronger h eat-resistence than that of condensation type. 2.appearance Part A...

Sábado 05 marzo 2016

Cantidad : 1 - Precio : 1,00 €

1. SEGURIDAD Dispositivo de control de parada de emergencia de seguridad Sistema de bloqueo de la silla dental Posición de la silla de Emergencia -aire Agua-electricidad con sistema de interruptor de un botón Agua-electricidad estructura de separación -aire diseño 2. HUMANIZACION...

Sábado 05 marzo 2016

Cantidad : 1 - Precio : 1,00 €

1.SAFETY Dispositivo de control de parada de emergencia de seguridad Dispositivo de protección de bloqueo de seguridad Sistema de bloqueo de la silla dental Posición de la silla de Emergencia Agua-electricidad-aire con sistema de interruptor de un botón Estructura de separación...

Sábado 05 marzo 2016

1.SAFETY Dispositivo de control de parada de emergencia de seguridad Dispositivo de protección de bloqueo de seguridad Sistema de bloqueo de la silla dental Posición de la silla de Emergencia -aire Agua-electricidad con sistema de interruptor de un botón Agua-electricidad estructura...

Sábado 05 marzo 2016

Cantidad : 1 - Precio : 1,00 €

1. SEGURIDAD Dispositivo de control de parada de emergencia de seguridad Sistema de bloqueo de la silla dental Posición de la silla de Emergencia -aire Agua-electricidad con sistema de interruptor de un botón Agua-electricidad estructura de separación -aire diseño 2...

Jueves 03 marzo 2016

Appearance White Paste 170~300 (1/10mm, 25℃) Specific Gravity 3.0~3.4 Oil Separation ≤1.0 (%) (200℃, 8h) Volatile ≤1.0 (%) (200℃，8h) Breakdown Voltage Strength ≥10 (kv/mm) Volume Resistivity ≥3×1014(Ω·CM) Thermal Conductivity 1.0-1.2 (w/m.k) 1 kg/tank,10kg/barrel...

Jueves 03 marzo 2016

Appearance White Paste 170~300 (1/10mm, 25℃) Specific Gravity 3.0~3.4 Oil Separation ≤1.0 (%) (200℃, 8h) Volatile ≤1.0 (%) (200℃，8h) Breakdown Voltage Strength ≥10 (kv/mm) Volume Resistivity ≥3×1014(Ω·CM) Thermal Conductivity 1.0-1.2 (w/m.k) 1 kg/tank,10kg/barrel...

Jueves 03 marzo 2016

Appearance White Paste 170~300 (1/10mm, 25℃) Specific Gravity 3.0~3.4 Oil Separation ≤1.0 (%) (200℃, 8h) Volatile ≤1.0 (%) (200℃，8h) Breakdown Voltage Strength ≥10 (kv/mm) Volume Resistivity ≥3×1014(Ω·CM) Thermal Conductivity 1.0-1.2 (w/m.k) 1 kg/tank,10kg/barrel...

Domingo 28 febrero 2016

Before the curing Appearance A: Trasparent B: Blue Relative Density 0.96～1.00(g/cm3) Viscosity At 25℃ A: 650~850 B: 650~850 (mPa·s) After the curing Degree 240~280 Fire resistance Flameout Time ＜16s curing time ＜2h Complete time ＞4h 1.Features ZS-GN01A/B is a kind...

Domingo 28 febrero 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Sábado 27 febrero 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Sábado 27 febrero 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Sábado 27 febrero 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Jueves 25 febrero 2016

Cantidad : 200 - Precio : 3,30 €

Name: Neutral Luminous Jelly Casual Watch Item No.: GFX01 Color: purple, white, light blue, light green, pink, yellow, blue,black Movement: Import. Size of dial: Surface 39 Watch frame 44 thickness 14.6 Material of dial: Stainless steel needle、Wear resistant resin lens、High...

Miércoles 24 febrero 2016

Silicone rubber is dense and soft, the smooth surface and good property of tracking resistant, can make preformed unit that not easy to broken when in expansion, it can long-term storage after expansion. Mainly used for the cold shrink silicon rubber power cable accessories as cable...

Miércoles 24 febrero 2016

Silicone Gel Sheeting Dressing is a kind of transparent, soft, elastic and self-adhesive sheet dressing. It is mainly made up of medical grade silicone, and effective in preventing the formation of new scars and reducing the appearance of existing scars. The sheet can be trimmed as needed...

Miércoles 24 febrero 2016

Before the curing Appearance White paste Relative density 1.60～1.70(g/cm3) Surface drying time ≤15(min) After the curing Tensile strength ≥1.5（MPa） Elongation At Break ≥150(%) Shear strength ≥2.0(MPa) Hardness 35～45(Shore A) Temperature Range -60～200(℃) Volume resistivity 2...

Miércoles 24 febrero 2016

Thickness 0.05mm, 0.06mm, 0.1mm Width 250mm, 300mm, 500mm Length maximum 100m PET thickness 0.05mm, 0.1mm Application Structure Type Mono-film Double membrane PET composite membrane Structure silicone rubber membrane silicone rubber membrane protective membrane ...

Miércoles 24 febrero 2016

Appearance White Paste 200~300(1/10mm, 25℃) Specific Gravity 3.0~3.4 Oil Separation ≤1.0(%) (200℃, 8h) Volatile ≤1.0(%)(200℃, 8h) Breakdown Voltage Strength ≥10(kv/mm) Volume Resistivity ≥3×1014(Ω·CM) Thermal Conductivity 1.0-1.2(w/m.k) 1 kg/tank, 10kg/barrel, 80g/branch...

Miércoles 24 febrero 2016

Before The Curing Appearance White Paste Tack Free Time ≤10 (min) Extrudability 5~11 (g/s，25℃) Cure Time 3～7(d) After the curing Relative Density 1.40～1.45 (g/cm3) Tensile Strength ≥2.5 (MPa) Break Elongation ≥500 (%) Shear Strength ≥2.0 (MPa) Hardness 45～55 (Shore...)

Miércoles 24 febrero 2016

Before The Curing Performance Indicators A B Appearance Gray Fluid White Fluid Viscosity 1500～2500(cps) 1500～2500(cps) A: B 1: 1 Mixed Viscosity 1500～2500(cps) Operable Time 30～120(min) (Adjustable) Curing Time 3～5(h) After The Curing Hardness 40~50(Shore A) Dielectric...

Miércoles 24 febrero 2016

Appearance Semi-Permeable White 200~360 (1/10mm，25℃) Dropping Point 180 (℃) Working Temperature 12—120 (℃) Corrosion Resistance No corrosion Phenomenon PH 6-9 Silicone grease is semi-permeable white grease, the properties are non-toxic, superior waterproof and adhesiveness...

Miércoles 03 febrero 2016

Precio : 1USD

Type: SBR/NBR/CR/EPDM rubber sheet silicone / viton rubber sheet Color: black / white/ green/brown Size: Thickness 1-50mm Width 0.5-2.2m Length 1-30m Ubicación : Room 924, Mini Building, No. 498 Jiushui east Road, Licang district, Qingdao, China, 86-532 Qingdao,China, Persona a contactar ...

Martes 26 enero 2016

Main features: 1. Multiple sets of film fitting shafts can perform film fitting, waste discharging for multiple strips and multi-layer material. 2. The film fitting tensions of material is totally controlled from end to end by magnetic powder tension controller. 3. It guarantees...

Jueves 21 enero 2016

Cantidad : 100pcs

Model DZ200 DZ300 DZ420 Maximum datum width(mm) 200 320 420 Die-cutting area(mm) 140*180 300*300 400*400 Die-cutting speed(times/h) 18000 18000 12000 Machine power(kw) AC220V;2.5KW AC220V;2.5KW AC380V;9KW Machine size(mm) 1000*900*1270...

Martes 19 enero 2016

Cantidad : 50 - Precio : 297.00 €

SADCE Tech is the specialist in conception of Sheet steels been able to for containers, trucks. We propose a very wide rubber range (+ of 100 rubbers, EPDM, Silicones, been able to) with a very wide choice of hardness (from 20 to 100 shores). We work at present with the industry...

Viernes 08 enero 2016

Caracteristicas ● Alta precisión ● Sin piezas mecánicas y móviles, el trabajo poco de reparación ● Span cero y continua y ajustable desde fuera ● Buena estabilidad ● cantidad de desplazamiento positivo de 500%; cambio negativo del 600% ● El sistema de dos hilos 4 ~ 20mA DC...

Viernes 08 enero 2016

Caracteristicas ● Alta precisión ● Sin piezas mecánicas y móviles, el trabajo poco de reparación ● Span cero y continua y ajustable desde fuera ● Buena estabilidad ● cantidad de desplazamiento positivo de 500%; cambio negativo del 600% ● El sistema de dos hilos 4 ~ 20mA DC...

Lunes 28 diciembre 2015

DongguanKaiao Electronics Technology Co.,Ltd. is a manufacturer located in Dalang Town,Dongguan city,Guangdong province. It was established in 2 0 0 8. What do we doWe have a professional team specialized in design,development, production and sales first-class silicone products...