ELECTRIC - 12487 Anuncios

Viernes 05 mayo 2023

Precio : ￥30~200 RMB

ALIF sensor pneumatic cylinder is the core electronic component of automatic control, which is composed of a shell, magnetic components, electronic circuits and wires. Through the detection of the travel position of the actuator, the purpose of automatic control such as positioning...

Viernes 05 mayo 2023

The rotary drum vacuum filter is a type of continuous filter that is commonly used in industrial processes for solid-liquid separation. The filter media used in a rotary drum vacuum filter is wrapped around the drum. The choice of filter media depends on the application, as different...

Viernes 05 mayo 2023

Electrophoresis metal coating can be called electrocoating, e-coating, electrophoretic painting, and probably a few other things. In any case, the parts are immersed in solution in an electrified tank containing the paint. Electrophoresis plating is drawn to the parts, where the addition...

Viernes 05 mayo 2023

Cantidad : 200,000/mo - Precio : 20USD-200USD

Intermediate frequency electrotherapy is the application of alternating current (including sine wave, pulse wave and modulated wave, etc.) with a frequency of 1kHz-100kHz for treatment and rehabilitation. At present, in the physical therapy industry, intermediate frequency electrical...

Viernes 05 mayo 2023

Cantidad : 200,000/mo - Precio : 20USD-200USD

Beoka K6 handheld sports lcd display massage gun has about 26KG of stall force, which is the weight you can exert on the device before the sports gun massager stalls and stops moving. This enables the user to exert more pressure to reach deeper into the target area by using this...

Viernes 05 mayo 2023

Cantidad : 200,000/mo - Precio : 20USD-200USD

Beoka shiatsu machine for leg pain relief with heat is professional in 4 ways: This massager for thigh pain is the Optimized result of the boot recovery system. This main device that controls the leg pain reliever machine is much smaller than the boot recovery system, which makes...

Viernes 05 mayo 2023

Most of the world's steel is made into finished products by stamping. The body, chassis, fuel tank and radiator sheet of automobiles, steam ladle of boilers, the shell of containers, and silicon steel sheet of the iron core of motors and electric appliances are all stamping processes...

Sábado 29 abril 2023

Cantidad : 500K/month - Precio : 0~60 USD

Size: 8.9 inch Resolution: 800*1280 Active Area: 119.28*190.85 Interface: MIPI View Angle: IPS Brightness: 350 cd/m² Touch Panel: Support CTP/RTP Supply Type: Factory/Manufacturer Certification: ISO9001, IATF16949, ROHS, REACH Overview of PJ8901B01 8.9 Inch LCD Display 800*1280...

Sábado 29 abril 2023

Cantidad : 500K/month - Precio : 0~60 USD

Type: AMOLED, PMOLED Size: 1.2"to 1.78" Resolution: 64*128 to 454*454 Interface: MIPI, SPI, QSPI, MCU Touch: Oncell or incell View angle: 4JNCD/160 It refers to the phenomenon that organic semiconductor materials and light-emitting materials emit light through carrier injection and...

Sábado 29 abril 2023

The latest generation of IEC AC charging piles supports charging power of up to 22KW and has an electronic display that dynamically shows charging efficiency. The charging piles are equipped with the ocpp platform which provides customers with online access to the charging status...

Sábado 29 abril 2023

Charger-Union including AC Chargers and DC Chargers. IEC AC Chargers comply with IEC61851-1 standard, AC Chargers can be applied for household or commercial scenes, and DC Chargers are suitable for industrial charging scenarios. Types of IEC Charger Type 2 AC Charger The IEC AC charger...

Sábado 29 abril 2023

Charge-Uni AC and DC products comply with the GB/T 18487.1-2015 standard. The AC Charger comes with compact size and simple design, and customers can choose wall-mounted or stand-pillar installation. The DC charger has a power of up to 180 kW, which further reduces charging time and...

Sábado 29 abril 2023

Charge-Uni GB/T AC chargers comes with IP55 protection level with longer product lifecycle. At the same time, the simple operation provides customers with a convenient charging service. Types of GB/T AC Level 2 Vehicle Charger 7KW GB/T AC Charger GB/T AC Level 2 EV Car Charger Features  1...

Sábado 29 abril 2023

Charge Uni IEC standard DC charging piles can reach up to 180KW to meet different scenarios; at the same time, they are adaptable to various harsh environment by their excellent design and protection performance. Types of DC Chargers 60KW DC CCS Charger 120KW CCS2 DC Charger 180KW...

Sábado 29 abril 2023

Type 2 7kw charger is easily realized data transmission with OCPP1.6 function in most scenarios. It has a simple design with wall mounting or pillar standing. With its weatherproof and impact-resistant design, the 7 KW Charger can withstand harsh environments and is well working for...

Sábado 29 abril 2023

One is a master switch, which can be controlled by the driver to lift the glass of each power window system for car the other is a sub-switch, which is installed in the middle of each window and can be manipulated by passengers. The master switch and the sub-switch do not interfere...

Sábado 29 abril 2023

Auto off relay control higher voltages or currents by using lower voltages or currents. When a certain voltage or current is applied to both ends of the electromagnetic relay coil, the magnetic flux generated by the coil passes through the magnetic circuit composed of the iron core...

Sábado 29 abril 2023

Shot blasting machine is an effective method to remove the surface contaminant, clean and roughen a smooth surface before applying a primer or coating. Shot blasting equipment is used in almost every industry that uses metal, including aerospace, automotive, construction, foundry...

Sábado 29 abril 2023

Precio : 200,000 USD~1,500,00

Polymer is the most commonly used pa12 3d printing material due to the relatively low cost of prototyping and production compared to other 3D printing materials. - PA 12 nylon powder PA12 is made from fine polyamide powder. Compared to traditional 3D printed plastic material, PA12...

Sábado 29 abril 2023

Precio : 200,000 USD~1,500,00

Using MPBF (Metal Powder Bed Fusion) technology, the EP-M650 is using a 657 x 657 x 800 mm³ build envelope and four laser systems to ensure a high efficiency printing production. The precise positioning and innovative area splicing control technology hereby offers uniformity and stability...

Sábado 29 abril 2023

Cantidad : 200000pcs/ - Precio : 80$-800$

Automatic Fingerprint locks are generally composed of two parts: electronic identification control and mechanical linkage system. The uniqueness and non-replicability of living fingerprints determine that digital door lock with fingerprint is the most secure locks among all locks at present...

Sábado 29 abril 2023

With the development of modern science and technology, industrial arm is a kind of high-tech automatic intelligent mechanical production equipment developed in recent decades. In the modern production process, Arm robots are widely used in automatic production lines, the research...

Sábado 29 abril 2023

Cantidad : 30 sets - Precio : USD10,000-USD100,000

The pipe roll forming machine is a high-quality, high-efficiency rounding device for winding carbon steel, stainless steel and non-ferrous metal profiles (round tubes, angle steels, grooved steel, , etc.) into rings and flanges. The tube roll forming machine is one of the types of...

Sábado 29 abril 2023

Cantidad : 15000Piece - Precio : $0.18~$0.3/Watt;$45~

The cable conforms to the IEC Standard (EU) of EV Charging, which suits Electric Vehicles manufactured in European Countries. One end with sheath connects to the EV while The other end connects to the Charging Station. The other option is Cable Spiral Type, it saves more space when stocking...

Sábado 29 abril 2023

Cantidad : 15000Piece - Precio : $0.18~$0.3/Watt;$45~

The cable conforms to IEC & SAE Standard (EU & USA) of EV Charging, suits Electric Vehicles manufactured in European Countries and America. The Type 1 end (with sheath) connect to the EV while The Type 2 end connects to the Charging Station. The other option is Cable Spiral Type...

Sábado 29 abril 2023

Cantidad : 15000Piece - Precio : $0.18~$0.3/Watt;$45~

The cable conforms to the IEC Standard (EU) of EV Charging, which suits electric vehicles manufactured in European countries. For better convenience, it has a simple design that no button on the top of the connector. It consists of Control Box and EU Plug at the tail end, a nice...

Sábado 29 abril 2023

Cantidad : 15000Piece - Precio : $0.18~$0.3/Watt;$45~

Our Type-2 EV car charger cable conforms to the IEC Standard (EU) of EV Charging, which suits electric vehicles manufactured in European Countries. For better convenience, this Type-2 electric car charging cable has a simple design that has no button on the top of the connector...

Sábado 29 abril 2023

Cantidad : 15000Piece - Precio : $0.18~$0.3/Watt;$45~

Jayuan AC type 2 charging socket is used for the home charging station as well as directly mounted wall socket for EV charging. Slow charging option is available and it's suitable to connect to the Type 2 connector and vehicle which adapts the type2 charging system. Features of Jayuan...

Sábado 29 abril 2023

Cantidad : 15000Piece - Precio : $0.18~$0.3/Watt;$45~

EV charging connector needs to be attached to the wall-mounted electric car charging socket types or fixed charging station EV socket types to charge the vehicle. There are different standards of the electric car charging sockets between Europe, USA, China and Japan. Find various...

Sábado 29 abril 2023

Cantidad : 15000Piece - Precio : $0.18~$0.3/Watt;$45~

As a professional electric car adapter manufacturer, JAYUAN provides different types of ev charging adapters for various chargers as GBT EV charger, type 1 EV charger and so on. The main purpose of the EV charger adapters is to connect different standard charging connectors to each...