PRODUCED - 4750 Anuncios

Viernes 05 marzo 2021

Hot-rolling refers to a metalworking process in which the steel is rolled at above recrystallization temperature (usually exceeds 1000℉). Being heated past its recrystallization point, the steel can be properly formed, shaped, and produced in larger quantities. After being cooled...

Viernes 05 marzo 2021

OVERVIEW OF HOT DIPPED GALVANIZED STEEL COIL Hot-dip galvanizing refers to the process of applying a protective zinc coating to a steel sheet or iron sheet, in order to prevent rusting. As the full hard steel has undergone acid washing followed by a rolling process through the zinc pot...

Viernes 05 marzo 2021

Typically insulating fluid is contaminated in the following ways: * Particles including fibres, rust and colloidal carbon. * Free and dissolved water. * Gases produced by fluid ageing, equipment failure and arc suppression in switchgear. * Chemical products caused by oxidation...

Jueves 04 marzo 2021

Railway freight, also known as freight by train, is produced in the context of the rapid development of the modern logistics industry at home and abroad, the continuous adjustment of the distribution of railway productivity, and the continuous release of transportation capacity. Railway...

Miércoles 03 marzo 2021

Different from other pot magnets at the first look, these deep pot magnet are actually designed, produced using the same principle. By using the steel housing, magnetic energy is focused and thus a higher holding force can be achieved. Deep Magnet for Sale NdFeB Deep Pot Magnet with Brass Body...

Miércoles 03 marzo 2021

Our magnet assembly includes hundreds of standard magnetic assemblies that can be used in workshops, schools, homes, supermarkets, offices, precast plants, etc. Pot Magnet Pot Magnet These simple-looking pot magnets generate even higher holding force than using just magnet without steel pot...

Miércoles 03 marzo 2021

Introduction Precast factories produce each ‘component' of a building such as walls, floors, stairs, roofs and then construction workers put these components together to have a building. These walls, stares, roofs etc are produced on a steel table by concrete pouring into forms...

Miércoles 03 marzo 2021

Cantidad : more than - Precio : 3000-6500 euro per M

Description of Galvanized Steel Coils Hot-dip galvanized steel coils are produced by passing the acid-washed and calendered full hard plate through the zinc tank, thereby galvanizing the film on the surface. Galvanized steel coil with good raw materials and 7 times the cold rolling machine...

Miércoles 03 marzo 2021

Cantidad : more than - Precio : 3000-6500 euro per M

Description of Direct Reduced Iron (DRI Steel) Direct reduced iron (DRI), also called sponge iron, is produced from the direct reduction of iron ore (in the form of lumps, pellets, or fines) to iron by a reducing gas or elemental carbon produced from natural gas or coal. Many ores...

Miércoles 03 marzo 2021

Cantidad : more than - Precio : 3000-6500 euro per M

Description of Copper Cathode Copper is one of the basic chemical elements. In its nearly pure state, copper is a reddish-orange metal known for its high thermal and electrical conductivity. It is commonly used to produce a wide variety of products, including electrical wire, cooking...

Martes 02 marzo 2021

Cantidad : 300,000 pe - Precio : 16-40 USD

7l pressure cooker We have a professional quality inspection department, which has strict quality control for each product before it is produced. For example, pressure detection, heat resistance of the handle, reversal of the bottom, and the like. TLS is a professional pressure cooker...

Martes 02 marzo 2021

Cantidad : 300,000 pe - Precio : 16-40 USD

6L Pressure Cooker We have a professional quality inspection department, which has strict quality control for each product before it is produced. For example, pressure detection, heat resistance of the handle, reversal of the bottom, and the like. TLS is a professional pressure cooker...

Martes 02 marzo 2021

Rock Reamer Overview of rock reamer hole opener The Rock reamer produced by GREAT company is used to expand the diameter of the pilot hole and is mainly used for horizontal directional drilling of oil, natural gas, electric power, and other pipelines. The Rock reamer is designed for...

Martes 02 marzo 2021

PDC Hole Opener Overview of PDC Hole Opener PDC Hole opener is designed for the enlargement of pilot holes and large hole applications. They are also used for road and river crossing applications. The hole opener is made of AISI 4145H fully heat-treated alloy steel. All products have...

Martes 02 marzo 2021

Cantidad : 10,000 - Precio : 0-50,000

Overview Of EQMS-200 VOCs Online Monitoring System EQMS-200 VOCs online monitoring system adopts PID (photoionization detector ) for gas detection. The target gas is irradiated I bombarded by ultraviolet light produced by the ion lamp, and is ionized after absorbing enough uv energy...

Martes 02 marzo 2021

Cantidad : 10,000 - Precio : 0-50,000

The instruments and analyzers produced by one of the best continuous emission monitoring system suppliers, ZETIAN now are widely used at home and abroad. They are: UV DOAS gas analyzer, laser TDLAS gas analyzer, gas analysis module, forward/backward laser dust monitoring devices...

Martes 02 marzo 2021

Gas Compressor Manufacturer - Your professional supplier and reliable partner! As common equipment in the process of natural gas extraction, storage, transportation and sale, cng gas compressor for sale is widely used in all aspects of natural gas production，transportation and sales...

Miércoles 24 febrero 2021

Designed and produced by MEISU, this mini pm fiber coupler can split the input power stably in the splitting ratio of 5: 95. And similar to the other PM coupler produced by MEISU, Mini PM Coupler (5: 95) can also maintain the beam polarization during the use. Moreover, designed with...

Miércoles 24 febrero 2021

Designed with a compact packing case that is specifically suitable for Fiber optic gyro (FOG), this mini polarization maintaining (PM) coupler can not only split the input power evenly just as the normal PLC splitter produced by MEISU but it can also maintain the beam polarization effectively...

Viernes 05 febrero 2021

ETCN offers cost-effective precision machining solutions whether you need a single part, a batch of prototypes. With the cnc precision machining services offered by ETCN, companies, and factories can produce parts of nearly any shape from soft metals like aluminum, harder metals like steel...

Viernes 05 febrero 2021

The product shaped by ETC injection and extrusion molding has high dimensional accuracy and a good surface. Different materials can be produced according to customer needs. We provide plastic molding services, with polyethylene moulding, PVC mouldings interior, custom rotational molding...

Viernes 05 febrero 2021

Rizhao Talent Sports Products Co., Ltd established in 2013 and mainly focusing on body fitness tools, including mini bungee trampoline, 40 inch, 50 inch, or any customized size mini bungee trampoline in the round, hex, octagon shape with or without safety handlebar, all are made of 32mm, 1...

Jueves 04 febrero 2021

Insole paper board // Insole board MERCKENS MERCKENS -belongs to the group of shoe insole board with increased hardness and is produced in Austria. MERCKENS CJM 188 is a standard, economical, environmentally material to 100% and is produced from waste paper. It is used for low-heel...

Jueves 04 febrero 2021

Insole paper board // Insole board BARTOLI BARTOLI belongs to the group of shoe insole board with increased hardness and is produced in Italy. BARTOLI is made by multilayer casting of plant fibers glued with organic substances. The material is used to make semi-insoles for male and...

Jueves 04 febrero 2021

The best children mask is the one they'll put on and keep on. We have a few to recommend that are comfortable, breathable, and fit a range of ages. Flat and 3D. Soft ear loops are designed to not pull on little ears. Each face masks for children's skin features a reinforced loop and...

Miércoles 03 febrero 2021

Precio : 1000-6000USD

The sanitary pad case packaging machines produced by Soontrue have a compact structure, good stability, and simple and uncomplicated operation. The system is efficient and reliable, and maintenance is more convenient. ZB800W Sanitary Napkin/Pad Packing Machine Main Features of Sanitary...

Miércoles 03 febrero 2021

Custom RFID Card Manufacturer Generally, cards with RFID chips are featured by the following characteristics: (1) High reliability. Information can be stored by around 10 years, and can be read and written by more than 100,000 times. (2) High security. Most RFID cards can be encrypted...

Domingo 31 enero 2021

The N95 mask is one of the nine particulate protective masks certified by NIOSH (National Institute for Occupational Safety and Health). N95 is not a specific product name. As long as it meets the N95 standard and passes the NIOSH review, it can be called an masker niosh n95. The...

Domingo 31 enero 2021

Isolation gown, also known as clean overalls, clean tooling, purification clothing, dust-free clothing, sterile clothing, anti-static tooling, dust-free overalls, isolation clothing, protective clothing, etc. In addition to clothing itself cannot be a source of dust emission, it also...

Viernes 29 enero 2021

Cantidad : 100000pcs/ - Precio : 10-30USD

2.5D full-screen protector is visually invisible and provides a complete edge to edge coverage of your device screen with colorful silk screen printing. Our design of full cover tempered glass offers a seamless installation while allowing you to choose any case you like! The quality...