DEFORMATION - 1642 Anuncios

Miércoles 25 octubre 2023

Aluminium window wall CWW-N15 is a system in great performance of thermal insulation, with high energy efficient thermal break aluminum profile mullions and transoms. It totally offers quality constructions in affordable prices and fully meets all stability and safety requirements...

Miércoles 25 octubre 2023

Dryzone baking dry cabinet could stimulate 100% internal moisture: combined with the dual characteristics of baking and dehumidification, the surface of the electronic components and the deep water molecules inside could all be stimulated out and make it completely dry. It not only...

Miércoles 25 octubre 2023

Glass wall with window system CWW-N15 is similar to unitized curtain wall system, but are generally less sophisticated. These glass window wall systems are common on small and medium sized buildings. Like curtain walls, glass window wall panels are largely prefabricated off-site (commonly...)

Miércoles 25 octubre 2023

Cantidad : 1000

LBH Dust Seal Fits Excavator Temperature ℃: -20/+200 Material: Viton Medium: high-temperature resistant dust ring seal ring Application: Mineral hydraulic oil The principle of achieving the "self-sealing" effect: the pressure type seal in the contact dynamic seal is the contact...

Miércoles 25 octubre 2023

PA has good fluidity and is easy to overflow. It is suitable to use a self-locking nozzle and heat it. At the same time, due to the rapid condensation of the melt, it is necessary to prevent the material from blocking the nozzle, runner, gate, etc., causing insufficient products....

Miércoles 25 octubre 2023

Precio : 10-30USD

The G80 clevis self locking safety hook is often used in applications such as rigging, hoisting, and towing, where a secure and reliable connection is crucial. It is important to use the appropriate size and weight capacity of the hook for the job to ensure safe and efficient lifting operations...

Sábado 14 octubre 2023

Cantidad : 6sets - Precio : 1 million-6 million

A steel pipe hydrostatic pipe testing machine is a device that is used to test the strength and integrity of steel under high water pressure. The machine applies hydraulic pressure to the interior of the pipe to determine if it can withstand the specified pressure requirements. This...

Jueves 12 octubre 2023

Stainless steel stub end is a punching method for turning over the outer edge of the rough forgings or semi-finished product. the edge is turned into a vertical edge along a certain curve. When the edge of the stub end is a straight line, the converted deformation is converted into a curved...

Miércoles 11 octubre 2023

The composite structure is hard but not easy to deformation, anti-aging, heat insulation, sound insulation. And it's full of artistic feeling, appear elegant. One-stop professional supplier of residential building materials. All the products produced by SIMTO factory need get through...

Martes 10 octubre 2023

Cantidad : 700 tons/y - Precio : $4-10/kg

Self Adhesive PTFE Sheet PTFE surface itself is not adhesive, such as want to bond and other substances must need one side and two sides after Nana chemical treatment, and rubber, metal, and other substances bond, in special use, make up for the non-adhesive performance of polytetrafluoroethyle...

Martes 10 octubre 2023

Cantidad : 700 tons/y - Precio : $4-10/kg

PTFE Molded Sheet PTFE is divided into molded plate and turning plate two categories. The molded plate is made of PTFE suspension resin by molding and sintering; Turning plate is the blank of PTFE suspension resin formed by molding or hydraulic method and then turning or rotary cutting...

Lunes 09 octubre 2023

Types Of Plastic Injection Mold Polishing Introduction to theplastic injection mold polishing These days, industrial products are developing in the direction of product high quality as well as product diversification, in this way mold quality is going to have an influence on product...

Lunes 09 octubre 2023

Cantidad : 90000sqm/w - Precio : $6.2/sqm~ $10.5/sqm

SPC Wooden Flooring Stone plastic composite, solid polymer core, or SPC flooring, is a vinyl flooring material with a rigid core made of powdery limestone, PVC, and stabilizers. Sometimes, you might see it referred to as a "stone polymer composite floor." Wood SPC flooring is dense...

Lunes 09 octubre 2023

As one of leading steel coil manufacturers in China, Steel Searcher provides various types of steel coil for sale, which also known as coil steel, galvalume steel coil, galvanized steel coils for sale, stainless steel coils for sale, PPGI steel coil and PPGL steel coil. The steel...

Jueves 28 septiembre 2023

This silicone washing up sponge is pineapple shape silicone washing sponge. The reusable silicone sponge wholesale shape is enjoyable. Kitchen pineapple silicone washing up sponge is made of high-quality food-grade silicone, natural, fast-drying, easy to use, and easy to clean. The...

Jueves 28 septiembre 2023

The side glue and back glue used in bookbinding have different requirements for the hardness, elongation, breaking strength and permanent deformation rate. The performance requirements of the side glue are far lower than those of the back glue because the book back is required to...

Jueves 28 septiembre 2023

The side glue and back glue used in book binding have different requirements for the hardness, elongation, breaking strength and permanent deformation rate. The performance requirements of the side glue are far lower than those of the back glue because the book back is required to...

Jueves 28 septiembre 2023

110KV oil immersed power transformers strictly designed and produced with the IEC standard and most advanced technology have great reputation and the best sell performance all over the world. 110KV Power Transformer Description This oil immersed type transformer consists of core, coil...

Miércoles 27 septiembre 2023

Cantidad : 6000 sets/ - Precio : 4000-600000USD

Carbon steel or mild steel is the mostly used metal in sheet fabrication. Commonly used structurally in buildings and bridges, axles, gears, shafts, rails, pipelines and metal shelves, car frames etc. The pro laser cutting mild steel with nitrogen technology is mostly applied in CS cutting...

Miércoles 27 septiembre 2023

Looking for high-quality grey chip board paper? Look no further than Xiaolong! As a leader in the bulk cardboard industry, Xiaolong offers the best grey cardboard paper with outstanding features that cater to all your packaging needs. Xiaolong Grey Cardboard Paper Specs: - Our grey...

Martes 26 septiembre 2023

PA66 GF 15 Heat Stabilized (A2006C, A2016C) for Engineering PlasticsPA 66 GF 15 is a 15% glass fiber reinforced, heat-resistance, polyamide 66 resin for injection molding.Anmei PA66 GF15 Storage and Handling PRE-PROCESSING： Pre-drying: 4-6h / 130°C Processing: Melting temperature...

Sábado 16 septiembre 2023

Precio : USD 1.00~USD50.00

VERYGREEN CLEAR PVC PIPE AND PVC FITTING VERYGREEN can offer high-quality transparent pvc pipe fittings to meet your different needs. As a clear pvc pipe manufacturer, we provide a variety of clear transparent pvc pipe, clear pvc fitting and clear pvc coupling as follows. Clear PVC...

Martes 12 septiembre 2023

Cantidad : 1 million - Precio : USD400-USD2000

Hot-rolling refers to a metalworking process in which the steel is rolled at above recrystallization temperature (usually exceeds 1000℉). Being heated past its recrystallization point, the steel can be properly formed, shaped, and produced in larger quantities. After being cooled...

Martes 12 septiembre 2023

Cantidad : 1 million - Precio : USD400-USD2000

Forging refers to a process that involves forming a metal using localized compressive forces, and it can be further divided into cold forging, warm forging, or hot forging based on temperature at which it is performed. Compared with cast alloy steel forged bars, hot forged bars are harder...

Martes 12 septiembre 2023

Flanging refers to the stamping process of turning the edge or outer edge of the hole on the workpiece into an upright straight edge with a die. It is included in the forming process of stamping. WHAT IS THE ADVANTAGE OF METAL FLANGING? It can process precision stamping parts with...

Sábado 09 septiembre 2023

Precio : USD 130 - USD 980

The flexspline belongs to hollow flanging standard structure, compact design, zero backlashes, coaxial output and input, excellent positioning accuracy, and rotation accuracy. Contact harmonic drive company Han's Motion for more information. HMHG-Ⅰ Series Unit (Hollow Shaft) Harmonic...

Sábado 09 septiembre 2023

Cantidad : 1-100Ton - Precio : 9000RMB/Ton-15000RMB

According to the sale report of DATIAN (DT) Fasteners for nearly 3 years, T-Nuts now become much more popular. T nuts are the nuts that look like the letter T. T nut fasteners are not only easy to install and unload, but also easy to install parts in any position, which can greatly...

Sábado 09 septiembre 2023

Precio : USD 130 - USD 980

Simple combination type (super flat hollow shaft), pursuing flat structure to the extreme, suitable for the application with the requirement on flat design with harmonic gear drive reducer. HMHD Series Harmonic Drive Hat Type List HMHD-Ⅲ Simple Unit (Super Flat & Hollow Shaft)...

Sábado 09 septiembre 2023

Cantidad : 3000UNITS - Precio : USD10000-100000

Manten Brand tow truck with crane for sale also is equipped with lifting crane, lifting towing device, hydraulic system, electric control system, vehicle body and tool box. It has many functions such as lifting, pulling, towing which is widely used in road, airports, docks, auto repair company...

Jueves 07 septiembre 2023

Name: Methyl Vinyl Silicone Rubber Feature: High temperature resistant Appearance: Colorless and transparent, no obvious mechanical impurities Application of Methyl Vinyl Silicone Rubber ZT-110 Methyl Vinyl Silicone Oil Rubber can be widely used in various fields of silicone compounds...