TABLE - 41240 Anuncios

Martes 18 noviembre 2014

Cantidad : 1000 tons - Precio : 450USD per ton

Oxygen absorber is the materials used to reduce the content of Oxygen and other gases in molten steel. Our company has developed the compound deoxidize according to the needs of steel smelting application to various forms of deoxidization process. The product is good at deoxidization...

Martes 18 noviembre 2014

This product used extra alumina as the principal raw material and it is made of various additives. This product is characterized by favorable stability of heat and shock resistance, high strength and no chipping, with service life over 250 times. Physical and chemical indexes ...

Martes 18 noviembre 2014

This product is mainly used for tundish lining, which is the 3rd generation of high-tech product following insulation board and tundish coating, and this product is characterized by convenient construction, without baking and long service life. Physical and chemical indexes ...

Martes 18 noviembre 2014

Tundish coating of HN series is characterized by easy painting, no crack, erosion resistance, long service life and easy disassembly. Compared with using the insulation board, the tundish coating series can reduce nonmetallic inclusion in liquid steel, enhance cleanliness of liquid steel...

Martes 18 noviembre 2014

Sliding plate fire clay has characteristics of good bonding and high refractoriness. It is the ideal material for filling sliding aperture. Physical and chemical indexes 牌号Brand HN-1 HN-2 HN-3 Al2O3 % ≥ 65 75 80 Cr2O3 %≥ 1.3 　 2 C %≥ 　 4 4 Ubicación ...

Martes 18 noviembre 2014

Cantidad : 2000 tons - Precio : 70-400USD per ton

Steel flow initiator is a kind of ladle slid nozzle filler which is successfully developed by our company in recent years, results show that ladle castables success rate of automatic start casting can reach above 95 percent. There is no metallic inclusion in ingot surface, is a kind...

Martes 18 noviembre 2014

Ladle gunning mixer with high grade magnesia, spinel, special binder and additive. It is characterized by good adhesion, high bonding strength, low rebound rate, easy sintering, good corrosion and erosion resistance, and is ideal material for cold and hot repairing mixer and ladle slag line...

Martes 18 noviembre 2014

Ladle permeable well block of chrome corundum and corundum spinel series are characterized by good volume stability, high strength at high temperature, strong erosion resistance to molten steel and good thermal shock resistance. It can be designed and produced integral well block...

Martes 18 noviembre 2014

Alumina-carbon slide gates are characterized by high strength, erosion resistance and good thermal shock resistance. They are preferred products for large/middle ladle and continuous casting tundish. They can meet the needs of different steel grades. Physical and chemical indexes...

Martes 18 noviembre 2014

Ladle nozzle well block series are developed with the newest matrix optimization technology and the theory of the most compact. They are characterized by good thermal shock resistance, strong washout resistance, steady quality and long life etc. Physical and chemical indexes 牌号Brand...

Martes 18 noviembre 2014

Ladle upper/lower nozzle series are developed with the newest matrix optimization technology and the theory of the most compact. They are characterized by good thermal shock resistance, strong washout resistance, steady quality and long life. Physical and chemical indexes Brand...

Martes 18 noviembre 2014

Cantidad : 1000 tons - Precio : 300USD per ton

Ladle castables using with corundum aluminum magnesia spinel and fused magnesite as raw materials, which is made of micro-power technology and additive agent, are characterized by good construction function, high strength, good volume stability, erosion and washout resistance and...

Martes 18 noviembre 2014

Low carbon magnesia carbon brick using with crystal magnesite, fused corundum, fused spinel, high purity and ultrafine graphite and nano composite antioxidant as raw materials, which are used for ladle slag line. Low carbon and carbon-free corundum spinel bricks are used for ladle...

Martes 18 noviembre 2014

Magnesia alumina carbon bricks, with high grade magnesite, corundum, spinel and graphite as raw materials, bonded by resin, are characterized by good slag resistance. The products are mainly used for ladle upper and lower slag line. Alumina magnesia carbon bricks, with high grade bauxite...

Martes 18 noviembre 2014

Cantidad : 600 tons p - Precio : 1300USD/ ton

Coil grout is a kind of painting material used for fused alumina recommended for application to the inside face of coreless induction furnace coils. Containing a red color is to distinguish the coil grout from the working lining. This product offers the following benefits and features...

Martes 18 noviembre 2014

The product is characterized by high corrosion and erosion resistance against molten steel and slag, dense sintered layer, long service life, low consumption of per ton steel, easy construction and repairing, and energy saving. Physical and chemical indexes Items Medium Frequency...

Martes 18 noviembre 2014

This company produces the lining material is called “mixed sand” for short. This product is the main refractories of the medium frequency induction furnace used by the small steel enterprises. Its effect is in leading position. Physical and chemical indexes Ingredients SiO2 ...

Martes 18 noviembre 2014

Power supply 220V-50Hz Power ≤4.5KW Output 6-8kg/min Liquid pressure 1.2-2.3Mpa Temperature Black material 0-99℃white material 0-99℃ Air supply 0.7-0.8kg/² 0.35M³/min Weight 80KG Time range 0.01-99.99s The equipment is so lightweight that can be...

Martes 18 noviembre 2014

Electric furnace gunning mix with magnesia based and magnesia-calcium based material, binder and sintering agent, is characterized by high bonding strength, strong corrosion resistance and non-spalling. When hot repairing temperature is higher than 1000℃, hot repairing effect is...

Martes 18 noviembre 2014

Electric furnace prefabricated part is characterized by high strength, good thermal shock resistance, corrosion resistance, steady quality and long life, etc. Physical and chemical indexes 牌号Brand DLD-1 DLD-2 化学成分 Chemical composition/%,≥ Al2O3 85 80 Cr­­2O3 2 ...

Martes 18 noviembre 2014

Cantidad : 700 tons p

Furnace bottom tapping hole fillers are steel fillers used in steel tapping hole of large eccentric furnace bottom. This product developed by our company is adapted to the need of increasing gradually in large-scale furnace in recent years, an ideal product to replace imported products...

Martes 18 noviembre 2014

Cantidad : 500 tons p

Taphole brick is molded at isostatic pressure, with fused magnesia and graphite as raw material. It is characterized by good oxidation resistance, high strength, good corrosion resistance, good integrity, easy replacing and long life and it is ideal material taphole of large and medium furnace...

Martes 18 noviembre 2014

Power supply 220V-50Hz Power ≤4.5KW Output 6-8kg/min Liquid pressure 1.2-2.3Mpa Temperature Black material 0-99℃white material 0-99℃ Air supply 0.7-0.8kg/² 0.35M³/min Weight 80KG Time range 0.01-99.99s Products overview: 1, no mold With your product...

Martes 18 noviembre 2014

Magnesia carbon brick series used for the electric furnace are made by adoption of fused magnetite, high-purity magnesium sand and graphite as principal raw material, through high-pressure molding and low-temperature treatment. This product is mainly used for electric furnace lining...

Martes 18 noviembre 2014

1, usage It is used in producing casting PU elastomer with chain extender of MOCA or BDO, such as printing roller, screen plate, impeller, lifting weight, hydraulic seal ring, etc. 2, feature It has the advantage of accurate measure, fast heat, low energy consuming, PLC control...

Martes 18 noviembre 2014

1, Usage It is widely used in all kinds of hard foam, soft foam, semi-hard foam, wood-like PU products, such as refrigerator, freezer, wood like line, car seat, and steering wheel and so on. 2，feature 1) it is widely used in various materials proportion, which can be adjusted...

Martes 18 noviembre 2014

1, Usage It is widely used in all kinds of hard foam, soft foam, semi-hard foam, wood-like PU products, such as refrigerator, freezer, refrigerator panel, furniture, instrument board, seat of high speed rail and plane and so on. 2, Feature It has the advantage of high accuracy...

Martes 18 noviembre 2014

Cantidad : 25 sets pe - Precio : 5000--20000USD per s

mining vibrating feeder advantages: 1. Stable vibration, reliable operation and long life; 2. can adjust the exciting force, can be changed and control traffic at any time, convenient adjustment and stability; 3. vibration motor as the source of vibration, low noise, low of power consumption...

Martes 18 noviembre 2014

Cantidad : 20 units p - Precio : 4000--50000usd Per s

I. Description of two stage crusher: Two stage crusher can crush glass, mineral ores, metal, clay, small stones, and pebbles and so on. This innovation crusher has no screen mesh, can process any moisture materials, not blockage, easy d ischarge, low abrasion on the head hammer...

Martes 18 noviembre 2014

Cantidad : 60 sets pe - Precio : 800--5000USD per set

Spiral Chute Machine used to beneficiation: • Rutile, ilmenite and zircon concentration • Iron ore, chromite and manganese beneficiation • Tin, tantalum and ore concentration • Gold, native copper and base metal recovery • Silica sands processing Advantages and features: ♥...