APPLIED - 5914 Anuncios

Jueves 29 septiembre 2016

Cantidad : 1000sets/Y

Tracking Index Test Apparatus 1. Introduction The tracking index test apparatus is designed according to IEC60112, UL746A, GB.T4207, gb4706.1 and TMD 3628-92. It is applied to evaluate the leakage resistance (CT1 and PT2) of the surface of insulating material. Tracking index test...

Jueves 29 septiembre 2016

Cantidad : 1000sets/y

Salt Spray Test Chamber Salt spray test chamber is applied to measure the reliability of the EUT against salt-spray corrosion. Salt spray chamber is to simulate the climate near the sea, there are two kinds of test according to different standards (JIS, ASTM, CNS, GB), neutral salt...

Jueves 29 septiembre 2016

Cantidad : 1000sets/y

Simulation Transport Vibration Testing Machine (PG-120) Simulation transport vibration testing machine is applied to test the anti viberation ability in transit, and it is widely used in the industries of electronics, motor, lighting fixture, package, toy and etc. This equipment...

Jueves 29 septiembre 2016

Cantidad : 1000sets/y

IEC61032 Tumbling barrel test machine 1. Introduction The TB series tumbling barrel test machine meets the requirements of GB2099.1-2008 clause 24.2, GB2423.8, GB7000, GB13140, VDE0620, IEC68-2-32, BS1363.1, EN50075, UL60730 and etc., tumbling barrel test machine is applied to...

Jueves 29 septiembre 2016

Cantidad : 1set - Precio : USD3300

ZRS-2 Glow-Wire Test Apparatus - Introduction The equipment is designed according to IEC60695-2-10, UL746 and GB/T5169.10. The specific material and sharp heating wire is heated to specific temperature (550 ℃~960 ℃) for 1 min by max current, then vertical burns the EUT with certain...

Miércoles 28 septiembre 2016

Cantidad : 1000000 - Precio : 1000~60000

API PDC Diamond Bit/PDC Cutter Bit/PDC Blades Bit for Oil Drilling 1-Product Specification: Number of Blade: Primary Cutter Type: PDC Primary Cutter Size(mm): 13 Nozzle Qty/Type: ND Junk Slot(in^2): 29.8 Gauge Length: 3” Connection Size/Type: 6-5/8” API REG Operating Parameters...

Domingo 25 septiembre 2016

Precio : 0.1-1usd/meter

Fiberglass duct rodder is an auxiliary tool applied in towing lead-rope through a pipe. The rod surface is hard and smooth, so it can get through the narrow pipe or channel easily.The inner core of the rod is made of fiberglass and unsaturated polyester resin. The outside layer...

Domingo 25 septiembre 2016

Precio : 0.1-1usd/meter

Fiberglass duct rodder is an auxiliary tool applied in towing lead-rope through a pipe. The rod surface is hard and smooth, so it can get through the narrow pipe or channel easily.The inner core of the rod is made of fiberglass and unsaturated polyester resin. The outside layer...

Domingo 25 septiembre 2016

Precio : 0.1-1usd/meter

Fiberglass duct rodder is an auxiliary tool applied in towing lead-rope through a pipe. The rod surface is hard and smooth, so it can get through the narrow pipe or channel easily.The inner core of the rod is made of fiberglass and unsaturated polyester resin. The outside layer...

Domingo 25 septiembre 2016

Precio : 0.1-1usd/meter

Fiberglass duct rodder is an auxiliary tool applied in towing lead-rope through a pipe. The rod surface is hard and smooth, so it can get through the narrow pipe or channel easily.The inner core of the rod is made of fiberglass and unsaturated polyester resin. The outside layer...

Jueves 22 septiembre 2016

Cantidad : 1 unit

RJ 45 Connector Cable Terminal Crimping Machine, Terminal Insertion Machine Feature: 1.The cable crimping machine is specially design for producing internet and phone wire . 2. Various crimping die for your option. 3. Special pressure British or American telephone plugs.Die replacing simple...

Lunes 19 septiembre 2016

Cantidad : 10/set - Precio : US$ 325

Product Specification Input Voltage 220V AC +/- 10% 50Hz/60Hz Power <=25W</span> Working Frequency 58KHz Outline Dimension 1590x390x20mm Net Weight 18kg Detection Range Each Side DR label: 2x0.85m AM pencil tag: 2x1.3m Working Tag AM hard tag...

Lunes 19 septiembre 2016

Cantidad : 500 - Precio : 2000/piece

API 17 1/2” S324 PDC Diamond Bit/PDC Cutter Bit/PDC Blades Bit for Oil Drilling 1-Product Specification: Number of Blade: 6 Primary Cutter Type: PDC Primary Cutter Size(mm): 16 Nozzle Qty/Type: 7ND Junk Slot(in^2): 29.8 Gauge Length: 3” Connection Size/Type: 7 5/8” API REG...

Miércoles 14 septiembre 2016

Cantidad : 500 - Precio : 50,00 €

Swing Check Valve DIN Standard Swing Check Valves (DIN 3202 F6 ,DIN 3202 F1) DIN F6 Swing check valve DIN F1 Swing check valve DIN Rückschlagklappe DIN Válvula de retención clapeta oscilante DIN Zpětná klapka stavební délka dle DIN EN558-1 serie 48 & serie 1 DIN Standard...

Miércoles 14 septiembre 2016

Cantidad : 500 - Precio : 50,00 €

Lift Check Valve DIN Standard Lift Check Valve DIN Lift check valve DIN Rückschlagventil mit innenliegender Schliessfeder DIN Válvulas de retención de tipo pistón DIN zpětný ventil DIN Standard tilbakeslagsventil med fjærbelastet kjegle DIN Standardında Kumandasız Çek Valf...

Miércoles 14 septiembre 2016

Cantidad : 5000 - Precio : 50,00 €

Gate Valves (F7 Type) DIN Standard F7 Gate valves / (Length acc.to DIN EN 558-1,face to face series 26 ) DIN F7 Gate valve DIN Absperrschieber F7 DIN Válvulas de compuerta F7 DIN F7 šoupátko stavební délka dle DIN EN558-1 serie 26 DIN Standard F7 sluseventil (lengde iht. DIN EN 558-1...)

Miércoles 14 septiembre 2016

Cantidad : 5000 - Precio : 50,00 €

Gland Packing Globe Valves ( Straight- Through Type) DIN Standard Gland Packing Globe Valve DIN Globe valve DIN Stop valve DIN Absperrventil Durchgangsform DIN Válvulas de globo DIN ventil uzavírací s klasickou ucpávkou přímý DIN Standard seteventiler med pakkboks (rett løp...)

Miércoles 14 septiembre 2016

Cantidad : 5000 - Precio : 50,00 €

Gate Valves (F4 Type) DIN Standard F4 Gate valves / (Length acc.to DIN EN 558-1,face to face series 14 ) DIN F4 Gate valve DIN absperrschieber F4 DIN Válvulas de compuerta DIN F4 šoupátko stavební délka dle DIN EN558-1 serie 14 DIN Standard F4 sluseventil (lengde iht. DIN EN 558-1...)

Miércoles 14 septiembre 2016

Cantidad : 5000 - Precio : 100,00 €

Bellows Seal Stop Valves (Angle Type) DIN Angle Type Bellows Sealed Stop Valve DIN Bellows Seal Globe Valve DIN Faltenbalgventil Eckform DIN Válvulas de fuelle（Paso angular.） DIN ventil uzavírací s vlnovcem rohový DIN Standard seteventil med belg (Vinkel modell) DIN Standardında...

Miércoles 14 septiembre 2016

Cantidad : 5000 - Precio : 50,00 €

Long life-Heavy Duty Bellows Seal Stop Valves DIN Standard Long Life-Heavy Duty Bellows Sealed Stop Valves DIN Long life bellows Seal Stop Valve DIN Long life bellows globe valve DIN Long bonnet bellows globe valve DIN Faltenbalgventil lange Bauform DIN Válvulas de fuelle de...

Miércoles 14 septiembre 2016

Cantidad : 5000 - Precio : 50,00 €

Y Type Strainer DIN Standard Y Type Strainer DIN Y Schmutzfänger DIN Y Filtro tipo DIN Y filtr DIN Standard Y type filter DIN Standardında Y-Tipi Pislik Tutucu Lọc Y chuẩn DIN ETM Code No. : ETM FIG.T.830,ETM FIG.T.831 This ETM Y type strainer can be used in Industry, Power stations...

Miércoles 14 septiembre 2016

Cantidad : 5000 - Precio : 50,00 €

Bellows Seal Stop Valves(Straight-Through Type) DIN Bellows Seal Stop Valve DIN Bellows Globe Valve DIN Faltenbalgventil Durchgangsform DIN Válvulas de fuelle DIN ventil uzavírací s vlnovcem přímý DIN Standard seteventil med belg (Rett løp modell) DIN Standardında Metal Körüklü...

Martes 13 septiembre 2016

Cantidad : 10000 - Precio : 1000~60000

API PDC Diamond Bit/PDC Cutter Bit/PDC Blades Bit for Oil Drilling 1-Product Specification: Number of Blade: 5 Primary Cutter Type: PDC Primary Cutter Size(mm): 13 Nozzle Qty/Type: 3ND Junk Slot(in^2): 29.8 Gauge Length: 3” Connection Size/Type: 6-5/8” API REG Operating...

Martes 13 septiembre 2016

Cantidad : 1 - Precio : 1000~60000

API 12 1/4” M323 PDC Diamond Bit/PDC Cutter Bit/PDC Blades Bit for Oil Drilling 1-Product Specification: Number of Blade: 7 Primary Cutter Type: PDC Primary Cutter Size(mm): 13 Nozzle Qty/Type: 7ND Junk Slot(in^2): 29.8 Gauge Length: 3” Connection Size/Type: 6-5/8” API REG...

Sábado 10 septiembre 2016

Origin: Henan, China (Mainland) Brand: Dashan Model: OEM Type: Sleeve Material: Copper Copper alloy: Brass, bronze, lead bronze Size: OEM Condition: New Processing: CNC Machining Processing Type: Machined Accessories Samples: Available Customized: As drawing Weight: Based...

Viernes 09 septiembre 2016

Cantidad : 2500sqm - Precio : 1.5$

High-quality and customized tarpaulin with high tenacity, tear strength, adhesion strength, light fastness, antimidew and flame retardancy features. In addition, width, length, color, weight and lacquering treat can be amended according to specific requirements. Tarpaulin can be...

Viernes 09 septiembre 2016

Precio : FOB SHANGHAI USD$600

Plate compactor,there are internal combustion and electric vibrating plate ram. Features and Advantages: 1.Hydraulic adjustable control lever for easy direction change 2.On the spot compaction for problem areas 3.Heavy-duty shock mounts reduce vibration to the upper deck 4.Impact-resistant...

Viernes 09 septiembre 2016

Cantidad : 1 - Precio : FOB SHANGHAI USD$500

Plate compactor,there are internal combustion and electric vibrating plate ram. Features and Advantage: 1.Easy-to-reach located controls 2.Large shock mounts reduce vibration to the handle 3.Heavy-duty shock mounts reduce vibration to the upper deck 4.Wear-resistant base plate extends life...

Jueves 08 septiembre 2016

Cantidad : 10 set - Precio : US$15000-20000/set

20t sin rieles Industria Eléctrico Entrega de transferencia de la compra La serie BWP sin rieles de transferencia eléctrica de la compra está alimentado por la batería de almacenamiento. La batería está instalada en el vehículo de desplazamiento y también equipar cargador inteligente para ello...

Miércoles 07 septiembre 2016

- - Origin: China (Mainland) Brand Name: Dashan Model Number: OEM Type: Sleeve Material: copper Copper alloy: Brass, bronze, lead bronze Dimension: OEM Condition: New Processing: CNC Machining Processing Type: Machined Accessories Samples: Available Customized: As drawing Weight...