AVES - 128 Anuncios

Jueves 07 septiembre 2023

Nylon is a synthetic thermoplastic fiber derived from Petroleum. As reinforcement materials, nylon 6 dipped tyre cord fabric plays an important role in the quality of automobile tyres. Nylon 6 Tyre cord fabric with its high energy absorption ability impact strength, chock resistance...

Miércoles 05 julio 2023

Cantidad : 10000pcs / - Precio : USD 130 - USD 980

HMCG-II series flex spline belongs to a cup-shaped standard structure and its input shaft connects with the inner hole of the harmonic gear reducer box through Oldham coupling. Generally, the circular spline is fixed and the flex spline does output. Features Of HMCG-Ⅱ Series Unit...

Miércoles 05 julio 2023

Cantidad : 10000pcs / - Precio : USD 130 - USD 980

HMHG-IV series flex spline belongs to the hollow flanging standard structure. The wave generator cam has its own Input shaft and there is a support bearing inside the reducer The power drive gearbox is fully sealed and easy to install, especially suitable for the situation where...

Miércoles 05 julio 2023

Cantidad : 10000pcs / - Precio : USD 130 - USD 980

HMHG-V Series with hat-combination standard structure. The input shaft can connect with the motor directly. The cable of power weeder gearbox can go through the low-speed hollow shaft Encoder can be installed on both input and output shafts Especially for Cobot and Joint modular...

Miércoles 05 julio 2023

Cantidad : 10000pcs / - Precio : USD 130 - USD 980

HMCG-I consists of three basic components: flexible gear, rigid gear, and wave generator. The flexible gear is a cup-shaped standard structure, and its input shaft directly cooperates with the inner hole of harmonic strain wave gearbox and connects with it through flat key or fastening screw...

Miércoles 05 julio 2023

Cantidad : 10000pcs / - Precio : USD 130 - USD 980

HMCG-II-E series flex spline is a cup-shaped standard structure, input shaft connects with the harmonic gear reduction box inner hole directly, fixed through a flat key connection. Generally, the circular spline is fixed, and the flex spline is connected to the output end. Features...

Miércoles 05 julio 2023

Cantidad : 10000pcs / - Precio : USD 130 - USD 980

HMCD-II series, with a commitment to lightweight and compact size of harmonic gear transmission, not only inherits the advantages of traditional products, but also realizes bold shape design based on the market demands. The overall machine adopts a super-flat structure that is light...

Martes 06 junio 2023

Cantidad : 4000 units - Precio : 650USD-3500USD

Dryzone dry nitrogen box has a fast recovery time which is important for some industry demand, especially the Semicon industry. Our N2 cabinet use the humidity value to control the N2 filling, and they are equipped with QDN(Nitrogen Saving Module) which could save 40-60% RH N2 compared...

Martes 06 junio 2023

Cantidad : 4000 units - Precio : 650USD-3500USD

Dryzone Industrial Drying cabinet are designed for electronic gadgets and valuable collections, PCB (printed circuit boards)/IC/BGA/MSD(moisture-sensitive materials) 2, 2a, 3, 3a, 4, 4a different levels of components could find the right dry cabinet in Dryzone and with the Auto baking...

Martes 06 junio 2023

Cantidad : 4000 units - Precio : 650USD-3500USD

Dryzone baking dry cabinet could stimulate 100% internal moisture: combined with the dual characteristics of baking and dehumidification, the surface of the electronic components and the deep water molecules inside could all be stimulated out and make it completely dry. It not only...

Martes 06 junio 2023

Cantidad : 4000 units - Precio : 650USD-3500USD

C2E Series humidity control dry box is auto less than < 5% RH, just plug it, and it could work. According to IPC/JEDEC J-STD-033 standards, moisture-sensitive device (MSD) levels of 4, 5, 5a, and 6 should be stored in a <5%RH environment. C2E Series <a href="https://www.dryzonecabinet...

Miércoles 24 mayo 2023

Dryzone n2 dry box has a fast recovery time which is important for some industry demand, especially the Semicon industry. Our N2 cabinets use the humidity value to control the N2 filling, and they are equipped with QDN(Nitrogen Saving Module) which could save 40-60% RH N2 compared...

Miércoles 24 mayo 2023

Dryzone n2 dry box has a fast recovery time which is important for some industry demand, especially the Semicon industry. Our N2 cabinets use the humidity value to control the N2 filling, and they are equipped with QDN(Nitrogen Saving Module) which could save 40-60% RH N2 compared...

Jueves 27 abril 2023

Dryzone n2 dry box has a fast recovery time which is important for some industry demand, especially the Semicon industry. Our N2 cabinets use the humidity value to control the N2 filling, and they are equipped with QDN(Nitrogen Saving Module) which could save 40-60% RH N2 compared...

Sábado 08 abril 2023

Dryzone Nitrogen Cabinet has a fast recovery time which is important for some industry demand, especially the Semicon industry. Our N2 cabinet use the humidity value to control the N2 filling, and they are equipped with QDN(Nitrogen Saving Module) which could save 40-60%RH N2 compared...

Miércoles 15 marzo 2023

C15 Series humidity range is 15-50%RH(adjustable). It designed to protect measuring devices, electronic devices, PCB, medcine, some metal material, and so on. And please also note the dry box desiccator could only remove the humidity, could not add humidity. And C15 Series have two series...

Miércoles 15 marzo 2023

C1Series humidity range is 1-50%RH(adjustable). It could go down to <10%RH, but when it is <8%RH, it is not stable, so if you want ultra low humidity, you could choose our ultra low series CF1 or C2E series. C1 Series have two series, C1U and C1B. It could store different kinds...

Miércoles 15 marzo 2023

C2E Series is auto less than < 5% RH, just plug it, and it could work. According to IPC/JEDEC J-STD-033 standards, moisture-sensitive device (MSD) levels of 4, 5, 5a, and 6 should be stored in a <5%RH environment. C2E Series is specially designed for this need. And the recovery...

Miércoles 15 marzo 2023

CF Series is a plug-and-play, fully auto-dry low-humidity cabinet that will be stable at <1% RH. There is no need to set the panel buttons at all. Our ultra-low humidity dry cabinet series is specially designed for MSD (moisture-sensitive materials) to comply with IPC J-STD-033 Standard...

Miércoles 15 marzo 2023

Dryzone Industrial Drying cabinets are designed for electronic gadgets and valuable collections, PCB (printed circuit boards)/IC/BGA/MSD(moisture-sensitive materials) 2, 2a, 3, 3a, 4, 4a different levels of components could find the right dry cabinet in Dryzone and with the Auto...

Sábado 04 marzo 2023

Precio : 100USD

Chafer Fabrics are the special industrial fabrics mainly made of Nylon 6, Nylon 66 and Polyester yarns. Chafer fabric has quite high breaking strength and good adhesion. Yusheng produces a variety of chafer fabrics, Standard products mainly made of Nylon 6, Nylon 66 and Polyester...

Martes 21 febrero 2023

NEMA 8 stepper is a compact size hybrid motor, which is mainly applied to small precision instruments. HEMM's new nema 8 series products have high efficiency, and high performance. NEMA 8 SQUARE STEPPER MOTOR BODY SIZE NEMA 8 SQUARE STEPPER MOTOR CHARACTERISTIC PARAMETER STEP ANGLE 1...

Martes 21 febrero 2023

China NEMA 34 stepper motor is a standard hybrid stepper motor, with a step angle is 1.8°. NEMA 34 SQUARE STEPPER MOTOR BODY SIZE NEMA 34 SQUARE STEPPER MOTOR CHARACTERISTIC PARAMETER STEP ANGLE 1.8°±5% NO. OF PHASES 4 RATED VOLTAGE 4.09 V RATED CURRENT 4.5 A RESISTANCE 0...

Martes 21 febrero 2023

NEMA 34 motor is a round stepper motor. The front cap is 86*86, but the motor body is round. NEMA 34 ROUND STEPPER MOTOR BODY SIZE NEMA 34 POWER SUPPLY ROUND STEPPER MOTOR CHARACTERISTIC PARAMETER STEP ANGLE 1.8°±5% NO. OF PHASES 2 RATED VOLTAGE 3.3 V RATED CURRENT 6.6A RESISTANCE 0...

Martes 21 febrero 2023

NEMA 24 motor is a standard hybrid stepper motor, the step angle is 1.8°, but it is a 3-phase one. NEMA 24T SQUARE STEPPER MOTOR BODY SIZE NEMA 24T SQUARE STEPPER MOTOR CHARACTERISTIC PARAMETER STEP ANGLE 1.2°±5% NO. OF PHASES 3 RATED VOLTAGE 3.0 V RATED CURRENT 5.0 A RESISTANCE 0...

Sábado 04 febrero 2023

Precio : 650USD-3500USD

Dryzone Industrial Drying cabinets are designed for electronic gadgets and valuable collections, PCB (printed circuit boards)/IC/BGA/MSD(moisture-sensitive materials) 2, 2a, 3, 3a, 4, 4a different levels of components could find the right dry cabinet in Dryzone and with the Auto baking...

Sábado 04 febrero 2023

Precio : 650USD-3500USD

CF Series is a plug-and-play, fully auto-dry low-humidity cabinet that will be stable at <1% RH. There is no need to set the panel buttons at all. Our ultra-low humidity </span>dry cabinets series is specially designed for MSD (moisture-sensitive materials) to comply with...

Sábado 04 febrero 2023

Precio : 650USD-3500USD

Dryzone Nitrogen Cabinet has a fast recovery time which is important for some industry demand, especially the Semicon industry. Our N2 cabinets use the humidity value to control the N2 filling, and they are equipped with QDN(Nitrogen Saving Module) which could save 40-60%RH N2 compared...

Sábado 17 diciembre 2022

NEMA 23 ROUND STEPPER MOTOR QUALITY Unlike the stepper motor 23, the NEMA23 round stepper motor driver is round one, and the size is 56.4*56.4. NEMA 23 ROUND STEPPER MOTOR CHARACTERISTIC PARAMETER STEP ANGLE 1.8°±5% NO. OF PHASES 2 RATED VOLTAGE 2.24 V RATED CURRENT 1.6A...

Sábado 17 diciembre 2022

NEMA 23 Motor Controller NEMA 23 motor shaft size is a standard hybrid stepper motor, the step angle is 1.8°. NEMA 23 CURRENT SQUARE STEPPER MOTOR CHARACTERISTIC PARAMETER STEP ANGLE 1.8°±5% NO. OF PHASES 2 RATED VOLTAGE 3.9 V RATED CURRENT 3.0 A RESISTANCE 1.3 ohm±10%...