QSFP28 - 66 Anuncios

Lunes 30 enero 2023

The asymmetric system only has a downlink rate of 10.3125 Gbit/s, while the uplink rate is still 1.25 Gbit/s. As the first mature next-generation PON technology, 10g epon technology is in line with network development trends. It has the advantages of large bandwidth, large optical...

Viernes 20 enero 2023

Sintai full range of china optical modules include SFP(1.25G/2.5G), SFP+(10G), SFP28(25G), QSFP+(40G), QSFP28(100G), CFP(100G), CFP2(100G/200G/400G), single mode transceivers, multimode transceivers, BiDi transceivers, CWDM transceivers, DWDM transceivers,, etc. Types of Optical Transceiver...

Viernes 04 noviembre 2022

FTTH Wholesale Primus lT is a professional ftth factory in China, committing to the research and development of PON technology and provides the best solution in ftth in china to ethernet/lan converter. Primus lT can cooperate in the development according to the special requirements of customers...

Jueves 20 octubre 2022

Precio : From 4$

GrenTech 100G QSFP28 PSM4 is a type of Four-Channel, Pluggable, Parallel, Fiber-Optic 100g optical transceivers for 100GEthernet Applications. The QSFP28 full-duplex optical module offers 4 independent transmit and receive channels, each capable of 26Gbps operation for an aggregate...

Jueves 20 octubre 2022

Precio : From 4$

GrenTech 100G QSFP28 LR4 fiber is equipped with a built-in LAN-WDM laser and PIN array with cooler, which can complete 4-channel photoelectric signal conversion through MUX DEMUX. As a normal kind of 100G optical transceivers, the SFP LR4 optic transceiver can transmit up to 10km...

Jueves 20 octubre 2022

Precio : From 4$

GrenTech 100G QSFP28 CWDM4 multiplexes four wavelengths, 1270nm, 1290nm, 1310nm and 1330nm, to a single-mode fiber for transmission by coarse wave division multiplexing (CWDM) technology. Contact GrenTech for more 100g cwdm optical transceivers info! 100G QSFP28 CWDM4 Optics Specification...

Jueves 20 octubre 2022

Precio : From 4$

100G QSFP28 (Quad Small Form-Factor Pluggable 28) is the smallest form of 100G optical transceivers, which is the main form factor of 100G that's widely used by the market. GrenTech provides a complete set of solutions for 100G QSFP28, including 100G SR4, LR4 fiber, 100G CWDM4,...

Jueves 20 octubre 2022

Precio : From 4$

GrenTech 100G QSFP28 DAC includiing QSFP28 to QSFP28 DAC and QSFP28 to 4SFP28 breakout DAC. Passive cable supports a distance of up to 5m, providing 30AWG to 26AWG. It compliants with RoHS, LSZH and QSFP+ MSA, InfiniBand SFF-8665 protocol and IEEE 802.3BJ /EDR specification. Mainly...

Jueves 20 octubre 2022

50G optical modules are mainly used for intermediate transmission and backhaul in 5G networks. Backhaul in 5G covers the metro access layer, convergence layer and core layer. The metro access layer mainly uses 25G, 50G, 100G and other colour optical modules, while the convergence...

Miércoles 21 septiembre 2022

40G&100G OTU service card launched by Sintai Communication Co., Ltd. supports two 40G or 100G service access. Its main function is to perform 3R regeneration of two 40G or 100G service signals that are accessed and can be transformed into two WDM standard wavelength optical signals...

Jueves 28 julio 2022

AOC is a cabling technology that accepts the same electrical inputs as a direct attach cable, but uses optical fiber "between the connectors". AOC uses electrical-to-optical conversion on the cable ends to improve speed and distance performance of the cable without sacrificing compatibility...

Sábado 18 junio 2022

Base Station Duplexer Duplexer is an important RF component in the frequency division duplex wireless communication system. It is composed of a receiving filter and a transmitting filter to realize the functions of receiving and transmitting antenna. Base Station RF Filter Features...

Sábado 18 junio 2022

GrenTech Active Optical Cable (AOC) covers 10G SFP+ AOC, 25G SFP28 AOC, 40G QSFP+ AOC and 100G QSFP28 AOC. It has the advantages of high speed, high density, low cost and low power consumption, which are widely used in supercomputer centers and data centers. Contact GrenTech for...

Sábado 11 junio 2022

For a long time, Primus It has been working to solve the bottleneck problem of network bandwidth optical modules through continuous technological innovation, adheres to concentrate superior forces constantly improve the industrial layout, and enhance the company's core competitiveness...

Sábado 11 junio 2022

The gpon vendors provided by Primus IT has three advantages: the first transmission distance is longer, the use of optical fiber transmission, the coverage radius of the access layer can reach 20 kilometres; the second can provide a higher bandwidth, 2.5G downstream / 1.25 upstream...

Sábado 11 junio 2022

The non-light source network is a point-to-multipoint optical fiber transmission and access technology. The downlink adopts broadcast mode and the uplink adopts time division multiple access. It can flexibly form trees, stars, bus and other topological structures. Only need to install...

Sábado 11 junio 2022

QSFP 50G 50G optical modules are mainly used for intermediate transmission and backhaul in 5G networks. Backhaul in 5G covers the metro access layer, convergence layer and core layer. The metro access layer mainly uses 25G, 50G, 100G and other colour optical modules, while the convergence...

Martes 17 mayo 2022

QSFP28 25g Direct Attach Cables (dac 40g 1to4) are compliant with the SFF-8436 specifications. SFP+ Direct Attach Cables are compliant with the SFF-8431, SFF-8432, and SFF-8472 specifications. Various choices of wire gauge are available from 30 to 24 AWG with various choices of...

Miércoles 11 mayo 2022

T&S Communication TSPA-85192-xxxC is a Pluggable SFP for 10 Gigabit Ethernet, compliant with the SFF-8431. This transceiver is a high-performance module for short-range data communication and interconnect applications. The length up to 150 m using OM2 MMF or 300 m using OM3 MMF...

Martes 12 abril 2022

In the 40G network transmission application, the qsfp+ 40g optical module occupies a position that cannot be ignored. According to different needs, it is applied in different transmission scenarios. Primus IT supplies a variety of cost-effective and practical 40G QSFP+ optical modules...

Martes 12 abril 2022

A New Age of 5G Is Just Beginning 25G SFP28 BIDI/LWDM/CWDM/DWDM transceivers for 5G front haul are available now. Optical Transceiver Types FTTH The notable technical feature of FTTH is that it not only provides greater bandwidth, but also enhances the transparency of the network to data formats...

Miércoles 16 marzo 2022

Precio : 1-10usd

Along with passive optical components, active optical components are indispensable elements of an optical network. TS communication adopts unique technologies and get itself well-equipped with advanced production lines and independent test platform to deliver highly reliable aoc fiber...

Miércoles 16 marzo 2022

Precio : 1-10usd

T&S Communication TSQS-851HG-xxxC is a Four-Channel, Pluggable, Parallel, Fiber-Optic QSFP+SR4 for 100 or 40 Gigabit Ethernet, Infiniband FDR/EDR Applications. This transceiver is a high-performance module for short-range multi-lane data communication and interconnects applications...

Jueves 10 marzo 2022

10G SFP+ LR GrenTech 10 base lr can transmit up to 10km over single-mode fiber. It adopts the most popular lasers in the market, like Mitsubishi, II-VI, Uxfastic and Semtech. The performance is stable and it compliants with 10G Ethernet IEEE 802.3ae and SFF-8421, and it is widely...

Miércoles 23 febrero 2022

QSFP28 Direct Attach Cables (dac cable 100g ) are compliant with the SFF-8665 specifications. Various choices of wire gauge are available from 30 to 26 AWG with various choices of China qsfp dac cable length (up to 5m). Compatibility of QSFP28 100G Copper Twinax Cable XM DAC QSFP-100G-CU5M...

Miércoles 23 febrero 2022

QSFP 100G 850nm 100m MPO Transceiver(100g sr4) is a parallel 100Gb/s Quad Small Form-factor Plug-gable (QSFP28) optical module. 100g qsfp28 sr4 provides increased port density and total system cost savings. The qsfp28 sr full-duplex optical module offers 4 independent transmit and...

Domingo 20 febrero 2022

Optical modules are optical transceivers used for high-speed data communication and telecommunication and are used anywherelarger amounts of data needs to be sent and received. From data centres to telecom, short or long-range,optical modules are ideal for large, efficient data transfers...

Domingo 20 febrero 2022

50G QSFP28 50G optical modules are mainly used for intermediate transmission and backhaul in 5G networks. Backhaul in 5G covers the metro access layer, convergence layer and core layer. The metro access layer mainly uses 25G, 50G, 100G and other colour optical modules, while the convergence...

Jueves 30 septiembre 2021

QSFP28 100G SR4 100M The QSFP28 100G-SR4-100m module is a highly integrated 4x25G transceiver focused on reach, bandwidth, density and cost for high port-count 100G systems, and client-side 100G interfaces. Each lane can operate at 25Gbps up to 70m using OM3 fiber or 100m using OM4 fiber...

Jueves 30 septiembre 2021

QSFP28 100G CWDM4 2K The QSFP28 100G-CWDM4-2km module is a highly integrated 4x28G transceiver focused on reach, bandwidth, density and cost for high port-count 100G systems, and client-side 100G interfaces. It is compliant with the 100G 4WDM-10 MSA, which is based on the CWDM4 MSA version 1...