5 WIRED PROBE - 1642 Anuncios

Martes 15 noviembre 2022

Boer disposable suction and irrigation device can also be known as flush and irrigation tube or suction suction irrigation system . It's used to irrigat tissues or organs and suction the wast liquor during a laparoscopic surgical procedure. 5mm and 10mm diameter tube are both available...

Viernes 11 noviembre 2022

Cantidad : 5000pcs/we - Precio : 100-1000

FBG Temperature Sensor CT-01 is made of high-voltage resistant insulating materials, and the sensing part is made of high-temperature thermal conductive ceramics, which has the characteristics of fast heat conduction; the product can be mainly used for temperature monitoring of power...

Martes 08 noviembre 2022

Fetal monitor transducer for tocotransducer monitor is an effective way for the care providers to use tools to monitor and interpret the heart rate of the baby (fetus) during late pregnancy and labor. Fetal monitor device and fetal monitor accessories enable to check on the status...

Viernes 28 octubre 2022

Cantidad : 1-999 - Precio : $10.69

SM-C3H8-P01 Propane Module [Detection gas]：propane (liquefied gas) [Type]：Figaro TGS2618 [Response time]：≤10 s [Recovery time]：≤10 s [Size]：32×25×15mm [Features]：safe and reliable, small size, easy to install [Introduction]：This module is widely used in the whole machine development...

Jueves 27 octubre 2022

Precio : 5 - 150USD

Endoscopic mucosal resection (EMR) and endoscopic submucosal dissection (ESD) are normally performed for removing polyps and early tumorous in the digestive tract. LeoMed is aimed to develop full range EMR/ESD accessories, such as polypectomy snares(hot), hybrid polypectomy snares(hot ...)

Sábado 22 octubre 2022

The high-precision electronic digital height gauge for sale is designed to measure dimensions for many industrial applications and testing institutions. This digital hight gauge tool can perform high-precision measurement of height, depth, and thickness, including special-shaped...

Sábado 22 octubre 2022

What Is Force Meter Used For? The digital force gauge meter is not only for various physical and mechanical performance tests of rubber, plastic sheets, , profiles, plastic films, wires and cables, waterproof coils, metal wires, cartons, and other materials but also for various materials...

Sábado 22 octubre 2022

The DHG-050 digital height master is a compact digital micrometer offering flawless contact measurements of dimensions, thickness and depth. This digital height master features a measuring length equal to 50 mm and accuracy of 1 µm at 20° C. This height master gauge stands are available...

Sábado 22 octubre 2022

Mikrometry Coating Thickness Detector will measure all coatings on metallic substrates using the magnetic induction or eddy-current principles, ensuring the correct measuring paint thickness on metal has been applied, such as paint, lacquers, sealants, or plating. The metal thickness...

Viernes 21 octubre 2022

Precio : 10-30USD

Number of layers: 4 Surface finish: ENIG Base material: High TG FR4 Outer Layer W/S: 4/3.5mil Inner layer W/S: 4/3.5mil Thickness: 1.0mm Min. hole diameter: 0.25mm Special process: Impedance Control Advantages Of 4 Layer High TG Impedance Control Fine Pitch PCB Own lamination process...

Viernes 21 octubre 2022

Precio : 10-30USD

Number of layers: rogers fr4 size：80*88mm Surface finish: ENIG Base material: FR4+Rogers 4350B Min. hole diameter: 0.3mm Minimum Line Width：0.230mm Minimum Line Space：0.170mm Thickness: 1.0mm Advantages Of 4 Layer rogers fr4 pcb Own lamination process to convenient production for...

Viernes 21 octubre 2022

Precio : 10-30USD

Number of layers: 2 Surface finish: ENIG Base material: Taconic TLY-5A Min. hole diameter: 0.3mm Outer Layer W: 1.046mil Outer layer S: /mil Thickness: 0.94mm Advantages Of 2 Layer Taconic PCB Own lamination process to convenient production for Multilayer PCB and shorten the lead time...

Viernes 21 octubre 2022

Precio : 10-30USD

Number of layers: 2 size: 184.2*158.9mm Surface finish: LF-HASL Base material: Rogers 4350B Min. hole diameter: 0.4mm Minimum Line Width: 0.227mm Minimum Line Space: 0.127mm Thickness: 0.7mm Advantages Of 2 Layer Rogers LF-HASL PCB Own lamination process to convenient production for...

Viernes 21 octubre 2022

Precio : 10-30USD

Number of layers: 2 size: 96.45*87.73mm Surface finish: ENIG Base material: Rogers 4350B Min. hole diameter: 0.5mm Minimum Line Width：/mm Minimum Line Space：0.139mm Thickness: 0.35mm Advantages Of 2 Layer Rogers ENIG Rf PCB Own lamination process to convenient production for Multilayer...

Viernes 21 octubre 2022

Precio : 10-30USD

Number of layers: 2 size: 98.45*49.45mm Surface finish: ENIG Base material: Rogers 4350B Min. hole diameter: 0.5mm Minimum Line Width：/mm Minimum Line Space：0.139mm Thickness: 0.35mm Advantages Of 2 Layer Rogers PCB Own lamination process to convenient production for Multilayer PCB...

Viernes 21 octubre 2022

Precio : 10-30USD

Number of layers: 2 Surface finish: ENIG Base material: F4B Min. hole diameter: 0.8mm Outer Layer W: 6mil Outer layer S: 6mil Thickness: 1.0mm Advantages Of 2 Layer F4B PCB Own lamination process to convenient production for Multilayer PCB and shorten the lead time. Jiangxi facility...

Jueves 20 octubre 2022

Wuhan BBT Medical is a professional ultrasonic transducer suppliers and ultrasound transducer manufacturer. Our homemade ultrasonic transducer is a device that converts electrical energy into mechanical energy, usually made of piezoelectric ceramic sheets. The piezoelectric effect...

Viernes 14 octubre 2022

Precio : 1-10usd

Clogging prevention and Specimen sampling are two critical demands for general suction procedures. Especially in orthopedic surgery, blockage caused by blood clots, tissue debris, bone debris, and bone cement fragments is a headache for doctors. Easyflow Filtered suction system for...

Jueves 29 septiembre 2022

>>>CONTACT MAC NOW<<<</strong> Email: at@mooreplc.com Mobile: +8618020714662(WhatsApp) Skype: +8618020714662 >>>CONTACT MAC NOW<<<</strong> ✦ Quick Details ✦ - Manufacturer : Bently Nevada - Product No. : 330180-90-CN - Product type ...

Martes 27 septiembre 2022

>>>CONTACT MAC NOW<<<</strong> Email: at@mooreplc.com Mobile: +8618020714662(WhatsApp) Skype: +8618020714662 >>>CONTACT MAC NOW<<<</strong> ✦ Quick Details ✦ 51451326504 PROBE LOW TEMP 20FT PH ✦ About Moore ✦ 1.PLC programmable controller...

Jueves 22 septiembre 2022

For personal use instruments, safe and sanitary for you. Avoid Transmissible diseases. Specification of dental hygiene suction mirror Model No. Describe Package U8894 Mouth mirror,probe,tweezers,bib,tray,cotton ball,napkin 250set/ctn U8895 mouth mirror,probe,tweezers,bib...

Miércoles 21 septiembre 2022

¿Sabe que el tratamiento HIFU ultrasonido focalizado de alta intensidad puede eliminar las arrugas? Para la eliminación de arrugas, el antienvejecimiento ultrasónico hifu es en realidad para estimular la capa de la fascia para lograr el efecto de reafirmar y levantar, de modo que...

Miércoles 21 septiembre 2022

TP400 cable probe system mainly used in various specifications of CNC grinding machines, CNC lathes, and especially measuring devices. TP400 CNC digitizing cable probe system includes a TP400 trigger probe unit, two four-core, oil-proof shielded cables,s and standard measuring software...

Miércoles 21 septiembre 2022

TTC400A cable tool setter unit is a product specially developed by our company for replacing some vulnerable tool setting units that is part of the swing-arm for setting the cutting tool in the CNC lathes. It is suitable for various specifications of CNC lathe, turning machine center...

Miércoles 21 septiembre 2022

TTC200 cable tool setter system includes a tool setter unit,blow-cleaning device(optional), and standard measuring software. TTC200 tool setter with hard-wired signal transmission used for broken tool detection and rapid measurement of tool length and diameter on a wide range of tools...

Miércoles 21 septiembre 2022

OTC200 optical tool setter/optical tool presetter is a wireless tool setter, optical coded signals are used to transmit information between the CNC tool setter and the receiver. It mainly used in various specifications of small to medium machining centers, CNC milling machines, drilling...

Miércoles 21 septiembre 2022

OPS-30 optical probe system with special cnc probe programming contains xyz probe cnc-OP510 optical infrared probe, OSI-20 receiver and standard measuring software. The OP510 CNC xyz touch probe is a compact 3D touch-trigger probe with optical signal transmission.Cnc xyz probe can...

Miércoles 21 septiembre 2022

The manual probe is suitable for various specifications of machine centers, CNC boring and milling machines, drilling-tapping machine centers, etc. Manual probe is an economy probe.It needs operator to move the probe, record and calculate the coordinate. Pioneer probe manual has two...

Miércoles 21 septiembre 2022

1. The reason why the dynamic diameter of the touch trigger probe is smaller than the static diameter After learning about the principle of probe calibration, we can easily explain why the dynamic diameter of the probe stylus is smaller than the static diameter. (1) The touch trigger...

Sábado 17 septiembre 2022

Cantidad : 50,000pcs - Precio : US$3-8.00 / pc

Parameters of A-TP-01-01 Reusable Adult Rectal Temp Probe APK Part Number A-TP-01-01 OEM Part Number N/A OEM Manufacturer Usually Chinese Patient Monitor (10KΩ, not 2.252KΩ) Description Compatible Reusable Adult Rectal Temperature Probe, 10KΩ, 6.3 Single Earphone Plug,...