PERFORMANCES - 17811 Anuncios

Jueves 30 marzo 2023

Making a precast concrete formwork magnet includes a lot of fastening work: fastening formwork on mold table, fixing wire boxes at designated spots etc. The traditional practice would be drilling holes and then inserting pins for fastening. To be more exact: drilling holes both on...

Jueves 30 marzo 2023

Product Description This stud magnet can be used solely for holding with the metal rod providing an easy way for removal. Meanwhile, it also can be used together with something else, for example, it shows one possibility where the pot magnet works as a base and plastic grippers can...

Miércoles 29 marzo 2023

【E12 Small Base】: The smart candle light bulbs is with the U.S. standard E12 and E26 Base. It perfectly fit to Ceiling Fan, Chandelier, Table Lamp, Floor Lamp, etc. 【High Performance】: Topstar dimmable led candle bulbs has extremely long lifespan hours (15,000+hours). 0 flickering and 0 buzzing...

Miércoles 29 marzo 2023

Galvanizing line tension leveller is a continuous stretching bending straightening machine that is used in the continuous hot-dip galvanizing line. Combining the characteristics of continuous tension metal straightener and roller straightener, the strip is straightened by plastic...

Miércoles 29 marzo 2023

Scale Breaker Scale-breaking tension leveller, also called scale breaker, is generally used for continuous pickling units. Scale breaker machine applies to bend stress to strip steel. The front and rear bridle roll applys tensile stress to the strip; Under the coordination of these two stresses...

Miércoles 29 marzo 2023

BOYA multi-roll leveler is the core equipment of finishing process in metallurgical hot and cold rolling mill. By repeatedly bending and convex straightening of the strip, the strip can be straightened with high strength and precision; Widely used in high strength steel, precision steel strip...

Miércoles 29 marzo 2023

Cantidad : 500 Sets/M - Precio : $1000-200000

Microfocus X-ray inspection is widely used in LED/automobile/aerospace/EMS etc field and become a necessity for modern PCBA inspection. The X-ray reel counter machines produced by Seamark have the characteristics of high performance, cost-effectiveness, long lifespan, user-friendly software...

Miércoles 29 marzo 2023

Cantidad : 500 Sets/M - Precio : $1000-200000

Microfocus X-ray inspection is widely used in the LED/automobile/aerospace/EMS ETC field and become a necessity for modern PCBA inspection. As a professional X-ray inspection machine manufacturer, Seamark Zhuomao provides SMT BGA X-Ray inspection machines that have the characteristics...

Miércoles 29 marzo 2023

Cantidad : 500 Sets/M - Precio : $1000-200000

Zhuomao BGA rework station is one of the best cheap BGA rework station suppliers in China. First of all, what is BGA machine? BGA rework/repair station is what we called ball grid array rework station, also abbreviated as BGArs. BGA is a chip packaging technology, which is applied...

Miércoles 29 marzo 2023

OVERVIEW OF ANGLE STEEL Formed by bending a single angle in a steel piece, angle bar for sale and angle steel for sale is the most basic type of roll-formed steel. angle steel is 'L' shaped, usually bent at a 90° angle. The legs of the "L" are sometimes equal or unequal in length...

Miércoles 29 marzo 2023

Cantidad : 1200sets/y - Precio : USD10000-200000

Double Heads large edm machine Double heads CNC EDM has two separated spindles and controllers, travel of table is much bigger than regular big EDM machines, each head can do machining on its own. DMNC's large EDM machine is much heavier. A1470 Double Heads CNC EDM Sinker A1880 Double...

Miércoles 29 marzo 2023

Cantidad : 1200sets/y - Precio : USD10000-200000

ZNC Die Sinking EDM Machine ZNC EDM Sinker has X and Y-axis manual control, and Z-axis automatic control. It can do one single job after manually set position, and job setting is also manual. Ideal for molds and spare parts manufacturing industries, ZNC die sinking EDM machine for...

Miércoles 29 marzo 2023

Cantidad : 1200sets/y - Precio : USD10000-200000

Windows Platform CNC EDM Machine ADI series CNC EDM sinker has the latest control system at the platform Windows 7, efficiency is about 20-30% higher than previous DOS based control system. Types of windows EDM machines made by DMNC are listed below. ADI300 CNC EDM Machine With Manual...

Miércoles 29 marzo 2023

Cantidad : 1200sets/y - Precio : USD10000-200000

High Speed CNC Milling Machine G-600 As we know there is dust while milling graphite material, special designed cutting liquid curtain of the high speed CNC milling machine keeps dust of graphite inside. Developed for machining graphite electrode for CNC die sinker, this type of machine...

Miércoles 29 marzo 2023

Cantidad : 1200sets/y - Precio : USD10000-200000

General Purpose CNC EDM Wire Cut Machine F Structure DK77 series high speed wire cut EDM has non-resistors HF power with Max cutting speed higher than 300mm2/min, Max cutting thickness is higher than 1000 mm. High accuracy linear guide way, ball screw and strong machine body with...

Miércoles 29 marzo 2023

This fiber is made of cold-drawn wire. Because of its high tensile strength, good toughness, and low price, it is often used as a substitute for glued steel fibers. Compared with traditional concrete, this kind of steel fiber has a great improvement in crack resistance and antiknock performance...

Miércoles 29 marzo 2023

This hooked steel fiber is a high-performance steel fiber. Because of its high tensile strength, good toughness, and low price, it is often used as a substitute for glued steel fibers. It can be widely used on roads, highways, curbs, factory floors, airport runways and etc. If you...

Miércoles 29 marzo 2023

This kind of steel fiber has the best comprehensive effect, and the best combination of high strength, high flexural strength (more than 10 times continuously) and the strongest anchoring force. It also has good dispersion in concrete. which is widely used in industrial floors, high-way speed...

Miércoles 29 marzo 2023

Micro steel fibers are made of copper micro wire, which is the most important materials of RPC and UHPC. UHPC has the features of very high strength, high tenacity, very good durability, and volume stability. It is a good and a new kind of construction materials. Micro steel fiber...

Miércoles 29 marzo 2023

There are many types of steel fibers used in concrete. The steel fiber for concrete reinforcement is a new kind of metal material, in order to enhance concrete with metal fiber and shotcrete in its hardened state. Tengzhou SDS steel fibers make concrete have extremely high flexural...

Miércoles 29 marzo 2023

Cantidad : 500000tons - Precio : $5-$200000

The drill pipe is the steel pipe with thread at the end, for connecting the drill ground equipment and drilling equipment in drilling bottom or bottom hole device. The drill pipe is the device which used to transport drilling mud to drilling bit, and improve, bring down or rotary...

Miércoles 29 marzo 2023

KT series high performance turbines have shot blasting machine spare parts including blasting wheels provided with eight throwing blades locked into the wheel double-disc. The double-disc wheel offers the following advantages: Improved abrasive flow for faster cleaning cycles Direct...

Martes 28 marzo 2023

Cantidad : 1 20ft con - Precio : 15-30 USD/m2

Wood plastic composite material is a kind of reversible recycling using sawdust, bamboo chips, rice husk, rice chaff, peanut husk, cotton straw and other low-plant biomass fibers as the main raw materials, using the principle of macromolecule interfacial chemistry and the characteristics...

Martes 28 marzo 2023

Biodegradable plastics refer to a kind of plastic that is degraded by natural microorganisms such as bacteria, fungi, and algae. The ideal biodegradable plastic is a kind of polymer material with excellent performance, can be completely decomposed by environmental microorganisms after waste...

Sábado 25 marzo 2023

Cantidad : 12000 tons - Precio : 2.5-6.8

The general-purpose chlorinated rubber anticorrosive paint is a one-component general-purpose marine anticorrosive paint. It can be used as a primer or as a topcoat. It can be modulated in various colors and is mainly used for the anticorrosion inside the freeboard of the deck. Advantages...

Sábado 25 marzo 2023

Cantidad : 12000 tons - Precio : 2.5-6.8

fluorocarbon coating market fluorocarbon surface technologies and fluorocarbon vs fluorocarbon coated fluorocarbon polymer & surface technologies / fluorocarbon surface technologies The high molecular polymer formed by the polymerization of fluoro olefin or the copolymerization...

Sábado 25 marzo 2023

Cantidad : 12000 tons - Precio : 2.5-6.8

Fluorocarbon finish paint is a two-component self-drying coating, formulated with high-grade fluorocarbon resin, special resin, and main film-forming substances. It has particularly superior performance of weather resistance, heat resistance, low-temperature resistance, chemical resistance...

Sábado 25 marzo 2023

Cantidad : 12000 tons - Precio : 2.5-6.8

High Build Zinc-rich Primer Epoxy high zinc primer is a two-component self-drying paint, composed of epoxy resin, special resin, zinc dust, additives and solvents, and the other component is an amine curing agent. The zinc epoxy paint is rich in zinc dust. The electrochemical protective...

Sábado 25 marzo 2023

Cantidad : 12000 tons - Precio : 2.5-6.8

The epoxy shop primer paint is composed of iron oxide red, epoxy resin, anti-rust pigment, filler, solvent, etc. The paint is fast-drying. After 5-10 minutes on the steel pretreatment line, the steel can be hoisted and stacked, and various primers and topcoats can be sprayed immediately...

Sábado 25 marzo 2023

Cantidad : 12000 tons - Precio : 2.5-6.8

Epoxy resin mortar is based on epoxy resin as the main component, with a series of additives, forms a high-strength, high-cohesive consolidated body after mixing and curing. It is with stable chemical properties, good corrosion and weather resistance. The consolidated body has high...