CONTACT - 56097 Anuncios

Sábado 02 marzo 2024

Bearing Double Row The rollers of two-row cylindrical roller bearings are crossing arranged. While rotating, the wave ratio is one time higher than single-row cylindrical roller bearings. However, the vibration ratio decreases 70%. And due to its two-row roller arrangement, compared...

Sábado 02 marzo 2024

Deep Groove Ball Bearings Deep groove ball bearings are the typical rolling bearings which have the most widely application. Basic deep groove ball bearing china is made up of one inner ring, one outer ring, one cage and a group of balls. It can bear both radial and axial load capacity...

Sábado 02 marzo 2024

Cylindrical Roller Thrust Bearing Cylindrical roller thrust bearings consist of rollers, cage components, shaft ring and housing ring. Those components are separable which makes the washing, assembling,disassembling, inspection and maintenance convenient and efficient. They only bear...

Sábado 02 marzo 2024

Cylindrical Roller Bearings Cylindrical roller bearings ( also called CRB in short) are a kind of radial rolling bearings with cylindrical rollers. The rollers are lined in parallel shapes, in between the rollers are cages that are able to avoid the leaning of roller or friction between rollers...

Sábado 02 marzo 2024

Ball bearings are a part of rolling bearings. As a professional bearing supplier and one of the ball bearing manufacturers in China in China, ZWA has its own ball bearing factory and the business covers home and abroad. Compared with roller bearings, ball bearings are point contact...

Sábado 02 marzo 2024

Angular Contact Ball Bearings Angular contact ball bearing, also known as acbb bearing, is a kind of inseparable bearing, the side shoulders of inner ring and outer ring are uneven. In order to increase the load capacity, one of the side shoulder will be lower than the other. This...

Sábado 02 marzo 2024

Bearing Types and Uses Types of ball and roller bearings for sale Ball Bearings Ball bearings are a bearing between a wheel and a fixed axle, in which the rotating part and the stationary part are separated by a ring of small solid metal balls. The moving parts rotate or slide on...

Sábado 02 marzo 2024

Precio : RMB 0.01/pcs~ RMB 0.

Ink Tag Magnet (NO.008) Ink sensor tag with pin can be used in anti-theft in supermarkets, clothing, library, mobile phone stores, bags, retail products, cosmetics, etc. This kind of tag is not easy to pull apart, once pulled apart, the ink will spill on the goods or clothes. Ink...

Sábado 02 marzo 2024

Precio : RMB 0.01/pcs~ RMB 0.

RFID HF Antenna (13.56MHz) The production process of Novatron's antenna products is mainly to etch aluminum foil into the shape required by customers on a soft PET film substrate. The frequency range of this section is HF. High-purity aluminum foil is used as the conductor material...

Sábado 02 marzo 2024

Precio : RMB 0.01/pcs~ RMB 0.

Hard Tag Detacher (NO.011) This extra strong detacher is compatible with most EAS hard tags on the market. It is extremely durable and includes hardware to mount this to your counter.Anti-Theft Prevention Products recommends this for use with it's security tag. Features of Hard...

Sábado 02 marzo 2024

Precio : RMB 0.01/pcs~ RMB 0.

Hard Tag Cone Pin (NO.004) Choosing the perfect pins for your tags is now easier than ever. Our collection offers a variety of options to suit your personal preference. Choose from grooved pins or smooth pins, both available for your convenience. Whether you prefer metal or plastic pins...

Sábado 02 marzo 2024

Precio : RMB 0.01/pcs~ RMB 0.

Hand Held Detacher (No.016) The manual hand-held detacher is ergonomically designed to comfortably and easily remove the hard tag from protected merchandise at point-of-sale for quick and efficient operation while enhancing throughput. The detacher also provides a channel in the...

Viernes 01 marzo 2024

origine : Guinée volume : 200.000T/mois teneur : 43-45% prix : négociable selon conditions Offre sérieuse ​​​​​Merci de prendre contact bauxiteimport@gmail.com Cordialement Ubicación : 19 rue goubet, 75019 paris, Persona a contactar : maxime joly, 06 99 35 16 35

Viernes 01 marzo 2024

Cantidad : 700 tons/y - Precio : $4-10/kg

Polytetrafluoroethylene sheets are made from polytetrafluoroethylene, a synthetic fluoropolymer of tetrafluoroethylene that has remarkable chemical resistance. PTFE sheet/ plate is known for its low coefficient of friction, high impact resistance, and high-temperature resistance....

Viernes 01 marzo 2024

Cantidad : 700 tons/y - Precio : $4-10/kg

PTFE Ring PTFE sealing products not only can seal oil fluid, can also seal water a class of fluids, including strong acid, strong alkali, strong corrosion strong chemical fluids and a variety of solvents, it can also seal a variety of gases, to adapt to dry friction occasions. None...

Viernes 01 marzo 2024

Precio : 0-400

An ac on board charger unit (OBC) is a device used in electric vehicles (EVs) to convert alternating current (AC) power from the electrical grid into direct current (DC) power to recharge the vehicle's battery pack. The EV OBC is typically located within the vehicle and is integrated...

Viernes 01 marzo 2024

Precio : 0-400

The main products of our new energy commercial electric motor control unit system are: main drive motor controller 3-in-1 drive motor controller (main drive + DC/DC + power distribution). We design electric commercial vehicle system solutions to meet the needs of different vehicle models...

Viernes 01 marzo 2024

Precio : 0-400

A DC/DC converter unit for electric vehicles is an electronic device that converts the voltage level of direct current (DC) power from one level to another. It is commonly used in various applications to provide a regulated power supply with different voltage requirements. The dc...

Viernes 01 marzo 2024

Precio : 0-400

Technical features of the motor controller: (1) use SVPWM modulation algorithm to improve the energy efficiency ratio of the power system; (2) configure high-efficiency CAN communication module to control the normal operation of the system; (3) have liquid temperature control system...

Viernes 01 marzo 2024

Precio : 0-400

Product Features Adopting APFC and intelligent software switch technology, with high efficiency and good reliability. DC/DC part adopts novel LLC resonant adaptive full soft switch power conversion technology, improving the conversion efficiency of electrical energy. Can work in the...

Viernes 01 marzo 2024

Precio : 0-400

Product Features: Adopts liquid-cooled seal waterproof and dust-proof structure, with lower temperature rise than natural cooling and high reliability of the whole machine. Meets ISO26262 ASIL B safety level. Full-function protection: input overvoltage undervoltage, output overvoltage...

Viernes 01 marzo 2024

Precio : 0-400

Product Features Adopt advanced high-frequency switching control technology, effectively reducing the size of the product, with the characteristics of high power density. Support 240 ~ 450Vdc wide range input, flexible to adapt to different models. High safety electrical isolation...

Viernes 01 marzo 2024

Precio : 0-400

EMP EV MOBILITY is a leading provider of innovative solutions for electric vehicle parts such as the DCDC Converter unit, onboard charger unit, motor control unit, and CDU combo unit. With our advanced technology and development experience, we deliver high-quality electric car drive...

Viernes 01 marzo 2024

1. Split design, Teflon coating, PTFE feet, PFA casing. 2. Better thermal conductivity and higher heating efficiency. 3. The heating plate area, plate thickness, column foot height, hole diameter, hole depth, and hole number can be customized, and it is suitable for various laboratory...

Viernes 01 marzo 2024

The Vial Cleaning System can be placed on a hotplate to clean the PFA vials and Labware by heated soaking in soap solution or acids. 1.All wetted parts are molded from high purity PFA. 2.Highly durable and will not crack or shatte. 3.No need for continuous monitoring. 4.Saves on acid cost...

Viernes 01 marzo 2024

Precio : USD3000-200000

Molding Over Molding & 2k Molding The same type of material of different colors is usually used for two-color injection molding（or 2k injection molding）so that the bonding strength of the first color and the second color plastic is the best, but due to the functional requirements...

Viernes 01 marzo 2024

Precio : USD3000-200000

Multi Cavity Mold The runner filling balance must be considered when designing the multi-cavity mold in order to ensure the best effect of filling balance, the multi cavity plastic mold will be multiple of 4 to design the mold generally, such as 4. 8. 16. 32. 64. 128 points, etc. ...

Viernes 01 marzo 2024

Precio : USD3000-200000

Medical Pipette Tip Mold USM as a medical plastic injection mold supplier provides products including medical device plastic parts, suction tips, blood collection devices, pregnancy test sticks, culture tubes, ventilator masks, etc. All plastic parts which will be used in the medical...

Viernes 01 marzo 2024

Precio : USD3000-200000

Medical Injection Mold For medical plastic injection molding companies, it means that medical supervisors are required to supervise and manage the materials used to manufacture the equipment, the medical injection molds parts are designed to withstand high temperatures and chemical corrosion...

Viernes 01 marzo 2024

Precio : USD3000-200000

Insert Mold USM molds focus on structural parts injection molds, water-assisted Gas-assisted injection molds, small parts plastic molds, precision plastic molds, and plastic parts product molds, from mold design to mold manufacturing, mold assembly test molds, product injection molding...