DRILLING - 2486 Anuncios

Viernes 17 marzo 2023

Cantidad : 100000 - Precio : 10USD-1000USD

Products Show for Emergency Strobe Lights The emergency strobe light is made of led explosion-proof alarm light, 5w led explosion-proof horn, class 1 led strobe light, class 1 div 2 emergency strobe light, class 1 div 1 strobe light. Two types of emergency strobe lights are available...

Viernes 10 marzo 2023

Precio : USD0.015-----USD100

The most common applications of our magnets for mounting in the mounting field are as follows: For the mounting of car overhead lights, we have professional magnet kits for the installation of car overhead lights. Cable and pipe mounting, we have specially designed a kind of rubber...

Sábado 04 marzo 2023

Cantidad : 10000 - Precio : 4-10000USD

Adopt high-precision metal seal. The metal seal consists of a pair of well-designed and processed metal seal rings as the axial dynamic seal of the bearing, and two highly elastic rubber energy supply rings are respectively located in the tooth palm and roller seal areas as static seals...

Sábado 04 marzo 2023

Cantidad : 10000 - Precio : 4-10000USD

The TCI bit has the characteristics of wide adaptability to the stratum and high mechanical drilling speed. SML's products conform to the API standard and the drill bit type conforms to the international IADC (International Association of Drilling Contractors) specification, the carbide...

Sábado 04 marzo 2023

Cantidad : 10000 - Precio : 4-10000USD

The teeth are processed by milling, and the teeth are all wedge tooth. Using floating bearing structure. Using high -density metal sealing. Steel ball lock the tooth wheel to adapt to high speed New wear -resistant materials for steel drilling teeth,increased the drill head cutting...

Sábado 04 marzo 2023

Cantidad : 10000 - Precio : 4-10000USD

The teeth of Steel Tooth Bit are made by milling and processing of tooth wheel blanks, mainly wedge-type teeth, and the structural parameters of the teeth should be balanced to facilitate rock breaking and strength of the teeth. Generally, the tooth height, tooth width and tooth spacing...

Sábado 04 marzo 2023

Cantidad : 10000 - Precio : 4-10000USD

The drill body of the Steel PDC Bit is made of a whole piece of alloy steel by machining, and the cutting teeth are made by welding the composite piece on the tungsten carbide material tooth post, and then the cutting teeth are inlaid on the drill body, and the diameter-preserving...

Sábado 04 marzo 2023

Cantidad : 10000 - Precio : 4-10000USD

Wholesale Shaped Cutter PDC Bit (PDC)Polycrystalline diamond composite is a composite material in which thin layers of polycrystalline diamond are bonded to a cemented carbide substrate. Polycrystalline diamond composites combine the high wear resistance of polycrystalline diamond...

Sábado 04 marzo 2023

Cantidad : 10000 - Precio : 4-10000USD

There is no fixed tooth shape and bearing for the hdd rock reamer, so it is necessary to select appropriate tooth shape and bearing structure according to different stratum structure. It adopts the palm back tilt, cold inlaid anti - ruin gold design, with the roller anti-peeling structure...

Sábado 04 marzo 2023

3003 aluminum coil is a non-heat-treated alloy, and its mechanical properties can be improved by conventional cold processing. It is an AL-Mn alloy, which is the most widely used rust-proof aluminum. The strength of this alloy is not high (slightly higher than that of industrial pure aluminum)...

Sábado 04 marzo 2023

Aluminium alloy checker plate sheets or 'aluminium chequer plate', an aluminium tread plate is a type of metal tread plate that has distinctive raised bars that give users a non-slip surface, making it super versatile for many industries. As well as being slip-resistant, aluminium...

Jueves 02 marzo 2023

As one of nail drill suppliers, Jimdoa has rich experience in the design and production of quality nail drills, Including many unique design nail drills; rechargeable electric finger nail drill; pen-shape nail drill, etc. Our R/D department about 8-10 workers, can provide OEM/ODM service...

Miércoles 01 marzo 2023

Cantidad : 5000-10000 - Precio : $700-1100/MT

Boron carbide powder for sale is a kind of gray-black micropowder. It is an inorganic substance. The chemical form of boron carbide is B₄C. As one of the three hardest materials known (after diamond and cubic boron nitride), you caan find boron carbide powder uses widely in tank armor...

Miércoles 01 marzo 2023

Precio : 1000-6000USD

Technology Specification: The design meets the requirement of API SPEC 6A. Nominal bore: 21/16″-41/16″ Rated working pressure: 2000-20000PSI Rated working temp: K、L、P、R、S、T、U、V Material class: AA, BB, CC, DD, EE, FF Product specification level: PSL1-PSL3G Performance requirement level...

Miércoles 01 marzo 2023

Precio : 1000-6000USD

A centrifugal mud pump is a pump that delivers liquid by centrifugal force generated when the impeller rotates. Structural Features of Centrifugal Pumps: In a volute-shaped pump casing, an impeller that can rotate rapidly is installed, and there are 2 to 8 blades on the impeller....

Miércoles 01 marzo 2023

Precio : 1000-6000USD

Small tapered roller bearings belong to precision parts, so it is required to be cautious in use even with high-performance bearing. If it is used improperly, the expected performance effect can not be achieved, and the bearing is easy to be damaged. Therefore, the use of small tapered...

Miércoles 01 marzo 2023

Precio : 1000-6000USD

BW Mud Pump The BW pump belongs to piston pump, and have the function of common mud pump. BW Mud Pump Common Model Commonly used models are BW-150 mud pump, BW-160 mud pump, BW200 mud pump, BW-250 mud pump, BW320 mud pump, etc. It can be used in the field of geological exploration...

Miércoles 01 marzo 2023

Precio : 1000-6000USD

Brief Introduction and Characteristics of Reciprocating Pump Single and double acting reciprocating pump relies on the reciprocating operation of plug or plunger pump cylinder to periodically expand the working volume of pump cylinder and shrink the suction and discharge liquid reciprocating...

Martes 28 febrero 2023

Automatic Drilling and Tapping Machine The manipulator is applied to the opening and plugging of the slag port in a copper smelting furnace. According to the copper smelting furnace slag port manual operation process and used tools, we developed hole digging robotic arm, which uses...

Sábado 25 febrero 2023

Cannulated Screw System Cannulated screws are a common method of fixation used by orthopedic surgeons for multiple fracture patterns. These screws may be cannulated or "hollow" to allow them to be placed over a guidewire facilitating better alignment prior to drilling or screw insertion...

Sábado 25 febrero 2023

Scan Screw For External In an external fixator, metal pins or screws are placed into the bone through small incisions into the skin and muscle. The pins and screws are attached to a bar outside the skin. Because pins are inserted into the bone, external fixators differ from casts...

Jueves 23 febrero 2023

Scientists Have Developed Nano-cubic Boron Nitride Harder Than Diamond Diamonds will no longer be the hardest substance in the world! At present, scientists have artificially synthesized nano-scale cubic boron nitride, which has exceeded the hardness of diamonds. According to the...

Miércoles 22 febrero 2023

These is the Rapid Prototype Machined Parts Machining parts recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 34mm*53mm Raw material: AL6061-T6 Surface Treatment: clear anodizing Finish: anodizing Specifications of Professional CNC Prototype Machining...

Miércoles 22 febrero 2023

These are the High Precision CNC Milling Machine parts recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 54mm*52mm Raw material: Aluminum 7075 Surface Treatment: clear anodizing Finish: anodizing Specifications of Precision Metal CNC Machining, CNC Milling ...

Miércoles 22 febrero 2023

This is the Precision CNC Turning Parts recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 46mm*76mm Raw material: AL6061-T6 Surface Treatment: clear anodizing Finish: anodizing Specifications of Precision CNC Turning Parts Type: Broaching, Drilling...

Miércoles 22 febrero 2023

This is the Mighty Precision Machining Parts Parts recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 56mm*45mm Raw material: AL6061-T6 Surface Treatment: clear anodizing Finish: anodizing Specifications of Precision CNC Machineing Parts Type: Broaching...

Miércoles 22 febrero 2023

This is the High Precision CNC Lathe Parts recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 39mm*49mm Raw material: AL6061-T6 Surface Treatment: clear anodizing Finish: anodizing Specifications of Precision CNC Lathing Parts Type: Broaching, Drilling...

Miércoles 22 febrero 2023

This is the Precision CNC Lathe Parts recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 36mm*38mm Raw material: AL6061-T6 Surface Treatment: clear anodizing Finish: anodizing Specifications of Precision CNC Lathing Part Type: Broaching, Drilling...

Miércoles 22 febrero 2023

This is the OEM manufacturer 5 axis cnc turning machine stainless steel/brass threaded rod auto parts recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 49mm*52mm Raw material: AL6061-T6 Surface Treatment: clear anodizing Finish: anodizing Specifications...

Miércoles 22 febrero 2023

This is the OEM custom manufacturer 5AXIS CNC machining and milling 4140 steel barrel extensions for Aerospace parts recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 55mm*45mm Raw material: 4140 steel Surface Treatment: clear anodizing Finish: anodizing...