STRUCTURES - 12919 Anuncios

Viernes 31 mayo 2024

Cantidad : 5-10sets p - Precio : $1500-100000

Double Shaft Shredder A double shaft plastic shredder is a type of shredder machine that is equipped with two parallel shafts, each fitted with rotary blades. The blades rotate in opposite directions to shred materials such as plastics, rubber, wood, and metal into small, manageable pieces...

Viernes 31 mayo 2024

Cantidad : 5-10sets p - Precio : $1500-100000

Characteristics of Bulk Discharge Hose Excellent synthetic rubber for wear, abrasion, weather, seawater and oil resistance. Reinforced helix steel wire supplies excellent kink resistance. Smooth and abrasion resistant inner rubber helps to prevent clogs and avoid damage from the abrasive...

Viernes 31 mayo 2024

Precio : 800-7000USD

Self service kiosks have become a popular, convenient and fast bill payment method in our lives in recent years. It could be a point of sale (PoS) self-service touch screen kiosks check-out, like those used in supermarkets, an information point in a tourist attraction, or self service...

Viernes 31 mayo 2024

Cantidad : 2000pcs pe

Gas surge arrester, also called gas discharge tube lightning protection device, is designed for antenna coaxial device and receive/transmit system not to be spoiled by lightning over-voltage, induced over-voltage, and static discharge. CATV Datacast, IPDC VOD IP Phone BBA Video conference...

Viernes 31 mayo 2024

Cantidad : 20000 - Precio : 1-100USD

Racks and Cabinets The rack is only used for integrated wiring, installing distribution frames, and cable management frames, to realize the management of cables and optical cable wiring systems. The width of the rack is usually the standard 19 inches, but the depth is greatly reduced...

Viernes 31 mayo 2024

Cantidad : 2000pcs pe

DC power supply SPD, also called DC lightning arrestor or DC surge suppressor, is designed for the protection of DC power circuit from the damage of lightning overvoltage, induce over-voltage, transient operation, and resonance (Less than 100μs) overvoltage. Besides low voltage 12v...

Viernes 31 mayo 2024

Uses of Circular Stapler Instruction for Use The Single Use circular bowel stapler places a circular, double staggered row of titanium staples when it is activated. Immediately after staple formation, the circular knife blade resects the excess tissue and creates a circular anastomosis...

Viernes 31 mayo 2024

IML cups from Honokage are dishwasher safe and scratch resistant, available options can be disposable iml cups or reusable cups. Honokage IML Drink Cups Wholesale The drinks packing from Honokage is available for cups and lid or straws, the decorative is In-Mold Labeling(IML), high...

Viernes 31 mayo 2024

Precio : $12~15/kg

TTA-15 is an specialty resin chemical epoxy acrylate with an unsaturated alicyclic structure, mainly used after modification, and can be cured both by UV and thermal, therefore more options for users in the synthesis of resin applications. Specifications of Tetra TTA15 (Cas 82428...)

Viernes 31 mayo 2024

Precio : $12~15/kg

TTA27 (dicyclopentadiene epoxide) is a typical cycloaliphatic epoxy resin. Its molecular structure is characterized by a close bicyclic structure between two epoxy groups and a stable methylene bridge across the six-membered ring. Therefore, the cured product of TTA27 has the characteristics...

Viernes 31 mayo 2024

Vertical milling center shows its superiority in mold processing. It is the preferred CNC machine tool for small and medium-sized mold parts processing industry. You can do milling, boring, drilling, expanding, reaming, tapping, and other processes in one set-up. A wide range of...

Viernes 31 mayo 2024

Cantidad : 1000 ton/m - Precio : 1-3usd/kilogram

Garment washing process is a special process in the clothing process and treatment. The effect of water washing getting more and more popular, garment washing chemicals and sizing chemicals are widely used in all kinds of clothing & garments, especially the emergence of some new...

Viernes 31 mayo 2024

Slant bed cnc lathe machine are available on this series of machines, multiple processes including turning, milling, boring, drilling, counterboring, reaming, tapping and other processes could be automatically made on one work-piece in one set-up. As a professional China CNC slant...

Viernes 31 mayo 2024

Cantidad : 1000 ton/m - Precio : 1-3usd/kilogram

Anti pilling agent 8168 is a kind of low temperature water environmental polyvinyl chloride ester copolymer emulsion, through the introduction of the monomer containing many double bond of the hinge component copolymerization, in polymerization process introduction of special fabric...

Viernes 31 mayo 2024

Cantidad : 1000 ton/m - Precio : 1-3usd/kilogram

Fine Chemical Products HT FINE CHEMICAL CO.,LTD is a large scale high-techtextile chemicals manufacturer in China, specialized in textile auxiliary industry for more than 10 years. Textile chemical is mainly divide into pretreatment auxiliary, Dyeing auxiliary, Dyeing auxiliary, Hand...

Viernes 31 mayo 2024

Cosmetic Tube Containers Plastic tube, provided by cosmetic tube packaging suppliers, is one of the most common packaging containers made of LDPE, HDPE, pp... etc. Products Description The structures of plastic tube are: Mono-layer, 2-layer, 3-layer and 5 layers. The diameter of plastic...

Viernes 31 mayo 2024

BK7 and UVFS Corner Cube Retroreflector Prism are designed to deviate incident light by 180 degrees independently of an angle of incidence. These corner cube prism have three mirror surfaces with angles at 90° to each other, juxtaposed to form the corner of a cube with the entrance...

Viernes 31 mayo 2024

UM-A6 Standard Tooth Model (Soft Gum 32 Teeth) Our company's product UM-A6 Standard tooth model(soft gum 32 teeth), is with 32 removable and removable tooth model, special gum is soft, removable, convenient for students and practitioners to practice tooth extraction. The external...

Viernes 31 mayo 2024

UM-A3B 1/1 Standard Brushing Mode This tooth model UM-A3B 1/1 Standard Brushing Mode is specially designed for the demonstration of tooth brushing teaching. The scope of application is various dental hospitals, clinics, dental training institutions and kindergartens and other areas...

Viernes 31 mayo 2024

UM-A15 Removable Standard Model Our tooth model UM-A15 Removable Standard Model is a removable tooth model, its gum is translucent, you can clearly see the structure and condition of the teeth inside. The occlusal degree of the dental model is very good, which can be used for occlusal...

Viernes 31 mayo 2024

Cantidad : 8000kgs - Precio : USD0.025 - USD1.05

TSP diamond is made of diamond micro powder and a small amount of binder sintered under high temperature and high pressure. It has high wear resistance, strong impact toughness, good thermally stability, and dense structure, and is widely used in the manufacture of petroleum, geological...

Viernes 31 mayo 2024

Cantidad : 8000kgs - Precio : USD0.025 - USD1.05

As one of the most professional abrasive powder suppliers in China, E-Grind offers a full range of superabrasives: Synthetic diamond, Cubid Boron Nitrid and related Solid products like CVD, TSP, PDC, PCD&PCBN, Diamond Wire-Draing Die blanks, for Drilling, Sawing, Cutting, Grinding...

Viernes 31 mayo 2024

Precio : $10000-400000

Paper rewinding machine is used to slit the big paper rolls into small paper rolls , then rewind them. The hydraulic shaftless paper holder automatically loads and unloads the original paper (tray), which is easy to operate the slitting rewinding machine. Equipped with rubber arc-shaped sticks...

Viernes 31 mayo 2024

Vigorously developing green packaging and printing is the concrete manifestation of circular economy in packaging and printing industry, the essential requirement of developing circular economy and comprehensive, coordinated and sustainable development view, and a powerful measure...

Viernes 31 mayo 2024

Electric Shearing Machine Performance Feature: The electric shearing machine is overall steel-welded structure. This machine is used to cut less than 3 mm thick sheet metal with chain drive under the principle of guillotine shearing. There is no power consumption when not shearing...

Viernes 31 mayo 2024

The pre-bending function makes straight edges narrower, and it can even round small round pipe with a diameter of 100mm. It can cooperate with the round duct locking machine and the round duct lock seam machine to produce the round air duct. Combined with the manual worm gear and...

Viernes 31 mayo 2024

Duct Corner Punching Machine Performance Features: Model Pressure(KN) Dimension of die holder(mm) Slider stroke Slider stroke times Power(kW) Dimensions(mm) L*W*H J23-25T 250 40*60 70 60 2.2 1220*920*2060 J23-40T 400 50*70 100 50 3 1320*970*2380 J23 series...

Viernes 31 mayo 2024

Precio : US $10-500/ Piece

NON-RISING STEM GATE VALVES Non rising stem gate valve drawing is also called rotary stem gate valve (also called non rising stem wedge gate valve). The valve stem nut is set on the gate, and the handwheel rotation drives the valve stem to rotate, so as to lift the gate. Generally...

Viernes 31 mayo 2024

Precio : US $10-500/ Piece

FORGED STEEL GATE VALVES Forged steel gate valve is a kind of gate valve whose parts are made of forging material. The gate of the forged steel gate valve moves along the vertical direction of the center line of the passage. It is mainly used for shut-off functions in the pipeline...

Viernes 31 mayo 2024

The double cartridge mechanical seal is a pre-assembled package of seal components, which make the installation much easier to prevent potential installing errors. Double Cartridge Mechanical Seal for Sale Cartridge mechanical seal is the rotary ring, stationary ring, spring, auxiliary seal...