PART - 28835 Anuncios

Saturday 17 December 2022

Echinacea has been a wild plant of the North American prairie for many years and has been domesticated in Europe. Echinacea is widely used in the west to improve immunity, treat colds and influenza, resist infection, accelerate wound healing and reduce inflammation. Basic Information...

Saturday 17 December 2022

ACE Biotechnology's mulberry leaves are certified organic (USDA NOP). We, dedicated to mulberry leaf extract, select the 1st ~ 3rd new leaves on the branches in the late period of spring silkworm to ensure the best quality starting materials are used to manufacture the extract. The...

Saturday 17 December 2022

The silicone sphere/round cake mold is soft, foldable, bendable and not easy to deform. One hand can flatten the cake mold and store it. The cake mold can be fully opened with a gentle shake of both hands. It is easy to carry and store. And the silicone material is not easy to be...

Saturday 17 December 2022

Cantidad : 30000pcs - Precio : 15--60(USD)

As an indispensable necessity in human life, the smart trash can that opens automatically has been with mankind through every era. With the general improvement of people's environmental awareness and aesthetic level, the types of intelligent trash cans are constantly being renovated...

Friday 16 December 2022

Compared with ball bearings, cylindrical roller bearings have higher radial load capacity. The design of cylindrical rolling elements also allows such bearings to accept relatively faster speeds than other forms of roller bearings. Cylindrical roller bearings produced by THB Bearings...

Friday 16 December 2022

Mounting of THB Crossed Roller Bearings When assembling the cross-roller bearing, follow the steps below. 1. Inspecting the parts before assembling them, Thoroughly clean the housing and other parts to be assembled, and check if there is no burr or knots. 2.Installing the cross-roller...

Friday 16 December 2022

Extra-long and height head footboard, with a curve, surrounded design, provide comforting feeling for patients. Environmental plastic can be sterilized at 100°C, tensile up to 30MPa Virgin ABS material. Key Features of D2w Manual Patient Bed Baosteel from Fortune Global 500 11 Process...

Friday 16 December 2022

Cantidad : 30-40sets/ - Precio : USD3000-200000

Car Window Mould Automotive Door Bracket Mold can shorten the fixture wasting(the fixture will improve the slight deformation) and it has very good product consistency. The product material is nylon with glass fiber, the product deformation cannot meet the requirements due to the...

Friday 16 December 2022

Cantidad : 30-40sets/ - Precio : USD3000-200000

Bike Frame Mold Nowadays, gas-assisted injection molding has been successfully applied to the fields of the automotive, home appliance, furniture, daily necessities, office supplies, and other fields, the main products are automotive doors, bumpers, window guides, door handles,...

Friday 16 December 2022

Cantidad : 30-40sets/ - Precio : USD3000-200000

Automotive Water Inlet Manifold Injecting gas through the nozzle is a typical method used in rod-shaped products, because this method does not require frequent changes to the mold and is versatile, but the disadvantage is that the nozzle needs to be modified and the single-use cost is high...

Friday 16 December 2022

Cantidad : 30-40sets/ - Precio : USD3000-200000

Injection Moulding Automotive Parts features: 1. The part material is made by PP-TD20 normally, the part surface will make leather texture which is very high, and he product surface is not allowed to have thimble marks, gate marks, sink marks, welding marks and flash or any other defects; 2...

Friday 16 December 2022

Cantidad : 30-40sets/ - Precio : USD3000-200000

Engine Coolant Pipe Gas-assisted injection mold equipment mainly includes nitrogen generators, superchargers, gas-assisted controllers, nitrogen storage cylinders, air intake components, gas recovery devices, molds, and injection molding machines. The function of the nitrogen generator...

Friday 16 December 2022

Cantidad : 30-40sets/ - Precio : USD3000-200000

The same type of material of different colors is usually used for two-color injection molding（or 2k molding）so that the bonding strength of the first color and the second color plastic is the best, but due to the functional requirements of the product, the performance difference...

Friday 16 December 2022

Cantidad : 30-40sets/ - Precio : USD3000-200000

Multi Cavity Mold Design The runner filling balance must be considered when designing the multi-cavity mold in order to ensure the best effect of filling balance, the multi cavity plastic mold will be multiple of 4 to design the mold generally, such as 4. 8. 16. 32. 64. 128 points, etc...

Friday 16 December 2022

Best solar off grid system does not have a connection to a public electricity grid. It is a generation power system based on solar panels, which is a full off grid solar system. Off grid solar setup systems are widely used in remote mountainous areas, non-electric areas, islands,...

Friday 16 December 2022

Hiconics's CM Low Voltage Drive could realize the improvement of productivity and energy efficiency of your processes, reduce the maintenance costs. Our Low Voltage Drive are widely used in a variety of areas, such as mixers, conveyors, compressors, fans, pumps, centrifuges, as well...

Friday 16 December 2022

Safety and reliability: special logic holding brake timing control ensures the safety and reliability of the lift. Brake resistor short-circuit protection: the built-in brake unit has a resistor short-circuit protection function. Frequent jogging and smooth operation: zero dead zone...

Thursday 15 December 2022

Cantidad : 1000 - Precio : 1,00 €

E36157290A0 NOZZLE ASSEMBLY 510 E36167290A0 NOZZLE ASSEMBLY 511 E36177290A0 NOZZLE ASSEMBLY 512 E36187290A0 NOZZLE ASSEMBLY 513 E36197290A0 NOZZLE ASSEMBLY 514 E36207290A0 NOZZLE ASSEMBLY 515 E36217290A0 NOZZLE ASSEMBLY 516 E36227290A0 NOZZLE ASSEMBLY 517 E36277290B0 NOZZLE...

Thursday 15 December 2022

Minimum Opening Angle 23° Maximum Turning Angle 100° Maximum Temperature 95°C Lever Break Torque ≥12N.m Tightening Torque 8-10N.m Specification of 40D-2 40mm Cartridge Pressure VS Average Flow Rate P. (bar) 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 F. (I/min) 10.8 12.6 14.5 16...

Thursday 15 December 2022

Cantidad : 20000 roll - Precio : 0.01-1USD

Medical dressing tape, with strong permeable, the skin can breathe naturally and decrease the possibility of infection. Applying to bandaging and fixing dressing, also can prophylactic use of easy sprain and friction parts. Waterproof dressing tape is no remains on the skin, Breathable...

Thursday 15 December 2022

Cantidad : 20000 roll - Precio : 0.01-1USD

KT Tape Wholesale Kinesiology strip with elasticity 170%-200%, good tensile strength. Strong and reliable sticky with high adhesion Soft, comfortable and skin are breathable with cotton material. The Hypoallergenic adhesive leaves no residue on body parts. Elastic cotton substrate...

Thursday 15 December 2022

Cantidad : 20000 roll - Precio : 0.01-1USD

The China elastic adhesive bandage, also named elastic adhesive fabric tape or elastic plaster tape, is designed to mimic the elasticity of the skin so you can make the most of your range of motion. The elastic adhesive fabric tape's medical-grade adhesive is also waterproof and strong...

Thursday 15 December 2022

Precio : USD100-USD20000

Parameters Of 27001K Ureteroscope Brand: Karl Storz Model: 27001K Endoscope Type: Ureteroscope Flexibility: Semi-Rigid, 8FR Working length: 340 mm View Angle: 6° Depth: 24 inches Height: 18 inches Width: 12 inches Now the price of semi rigid ureterorenoscope is affordable, if you have needs...

Thursday 15 December 2022

Precio : USD100-USD20000

Flexible scopes consist of the flexible endoscope insertion tube, bending section, light guide tube, water/suction valve, stress boot, knob, light guide beam connector, light guide fiber, bendable image beam, and other important accessories. The structure of flexible endoscope seems simple...

Thursday 15 December 2022

People like different animals, in addition to the above-listed parts, our company can also be customized according to your requirements of different animal shaped lanterns. We can custom design of Chinese lantern in accord with the client's needs in colour,size, shape etc. The other...

Thursday 15 December 2022

Our company uses high-quality raw materials, coupled with advanced production technology, with more than 20 years of belt production experience, our products with high efficiency, low elongation, flexible and high fatigue resistance, good antistatic property, the friction coefficient...

Thursday 15 December 2022

The utility model relates to an LED light bulbs for outdoor light fixtures, comprising a bulb head and LED bulbs. The bulb head is provided with a drive circuit and a heat radiator, wherein the heat radiator is provided with a bulb cover which is provided with a through hole the...

Thursday 15 December 2022

Types Of Outdoor Hardscape Lighting The development of outdoor landscape lighting accessories now embodies not only lighting, but also artistic decoration and beautification of the environment. According to the different places of use, outdoor retaining wall lights are divided into...

Thursday 15 December 2022

When customer use or install the outdoor lighting, they usually will need the following outdoor lighting accessories: stakes, light mount(3 holes light mount), risers, etc, for the stake, we can provide brass material stake and plastic material stake, As one of the custom outdoor...

Thursday 15 December 2022

Established in 2002, as a professional wholesale outdoor lighting manufacturer, our company provides different types of outdoor lights fixtures for customers. Outdoor lamps and light fixtures supplied by us cover a wide range, including spotlight, path light, underground light, wall wash light...