HARDENING - 510 Anuncios

Viernes 03 noviembre 2023

CX2020A high-frequency induction heating converter is designed to work at the frequency range of 50~120KHz and its output power range is 10KW. It is often used for induction brazing, welding, small parts forging heating and heat treatment. The core component of this high frequency...

Viernes 03 noviembre 2023

The working frequency of CX series high frequency induction heating machine module covers 50KHZ ~ 120KHZ. You can find the existence of this high-frequency induction heating machine series in induction welding, tool welding, pipe welding, thermal nesting, thermal packaging, etc. Types...

Jueves 02 noviembre 2023

The body of the basic grade barrel is made of 45 # steel. The liner of the barrel is made of basic alpha-101 bimetallic material. The high-grade barrel adopts imported HIP powder alloy oval liner. Its material has excellent wear resistance, corrosion resistance and other properties...

Viernes 27 octubre 2023

Slewing Ring Bearing With External Gear is with gear on the external ring, it is processed by a gear shaping machine. Customer can prefer the gear hardening treatment or not according to the working condition, if it need high load and press, we advise to do hardening treatment. Due...

Miércoles 25 octubre 2023

Cantidad : 30000 squa - Precio : 100-200RMB

As an outdoor heavy bamboo floor, it is manufactured using international cutting-edge biomimetic technology. Firstly, the bamboo raw materials are processed through 18 thinning processes to produce bamboo filaments with basically uniform morphology. Then, under high temperature conditions...

Jueves 12 octubre 2023

ZHANGXIAOQUAN: Japanese knife suppliers, prepare the finest cuts of sushi or fillet 8.5-inch sharp Knife. This Japanese Knives has the same length, weight and shaped of blade design of different material handle for your selection. Beautiful to hold and behold, these Japanese-designed...

Miércoles 11 octubre 2023

Precio : 4-10000USD

The entire bit body of the PDC steel bit is made of medium carbon steel and machined using a fabrication process. The bit crown is treated with a surface hardening process (sprayed tungsten carbide wear layer, carburized) to enhance erosion resistance. Specification Of Steel PDC...

Miércoles 27 septiembre 2023

Precio : 200,000 USD~1,500,00

Tool Steel Additive Manufacturing Maraging Steel is an ideal material for many industries, like tooling industries. Eplus3D's maraging steel powders include 18Ni300/1.2709 and 13Ni400. These powders have been tested for use on Eplus3D's 3d metal printer. Eplus3D also offers a wide...

Martes 12 septiembre 2023

Cantidad : 1 million - Precio : USD400-USD2000

Hot-rolling refers to a metalworking process in which the steel is rolled at above recrystallization temperature (usually exceeds 1000℉). Being heated past its recrystallization point, the steel can be properly formed, shaped, and produced in larger quantities. After being cooled...

Viernes 08 septiembre 2023

3004 aluminium alloy is an alloy in the wrought aluminum-manganese family (3000 or 3xxx series). It is similar to the 3003 alloys, except for the addition of approximately 1% magnesium. Application of 3004 Aluminium Plate 3004 aluminum plate can be used for the processing and storage...

Jueves 07 septiembre 2023

Cantidad : 20GP

Description of High Temperature Alumina Cement Calcium aluminate cement, alumina cements or high alumina cements are obtained by the reaction at high temperature of lime (from limestone) and alumina (contained in natural minerals like bauxite). The aluminate cement obtained after...

Jueves 07 septiembre 2023

Cantidad : 20GP

Amorphous Calcium Aluminate Details: The mineral of amorphous calcium aluminate (non-crystalline calcium aluminate) is C12A7. The alumina content is about 50%. However, the appearance of amorphous calcium aluminate is different from crystaline calcium aluminate or CA. It looks...

Jueves 07 septiembre 2023

Cantidad : 20GP

What is High Alumina Cement High Alumina Cement (HAC, sometimes known as calcium aluminate cement (CAC) or aluminous cement) is composed of calcium aluminates, unlike Portland cement which is composed of calcium silicates. It is manufactured from limestone or chalk and bauxite....

Jueves 07 septiembre 2023

Cantidad : 20GP

CSA (Calcium Sulfoaluminate Cement) cement is a special cement used in many applications where early high strength and fast setting development are necessary. CSA cement is short for Calcium Sulfo-aluminate Cement, also named rapid setting cement, high strength cement, fast hardening cement...

Jueves 07 septiembre 2023

Cantidad : 20GP

Description of Calcium Aluminate Cement Calcium aluminate cement, alumina cements or high alumina cements are obtained by the reaction at high temperature of lime (from limestone) and alumina (contained in natural minerals like bauxite). The aluminate cement obtained after cooling...

Jueves 07 septiembre 2023

Cantidad : 20GP

Amorphous Calcium Aluminate Details: The mineral of amorphous calcium aluminate (non-crystalline calcium aluminate) is C12A7. The alumina content is about 50%. However, the appearance of amorphous calcium aluminate is different from crystaline calcium aluminate or CA. It looks...

Jueves 07 septiembre 2023

Cantidad : 20GP

What Is CSA Cement? CSA (Calcium Sulfoaluminate Cement) cement is a special cement used in many applications where early high strength and fast setting development are necessary. cement CSA is short for calcium sulphoaluminate cement, also named rapid setting cement, high strength cement...

Jueves 07 septiembre 2023

Stainless Steel Seal Stainless Steel is short for stainless acid resistant steel. It is called Stainless Steel with weak corrosive medium or Stainless Steel, such as air, steam and water. The type of steel that corrodes the chemical corrosive medium (acid, alkali, salt, etc.) is...

Martes 05 septiembre 2023

Description of Cold Rolled Sheet The china cr sheet is manufactured from the hot rolled sheet. The china hot rolled steel sheet is cleaned chemically and processed further in cold reduction mills, where the material is cooled (at room temperature) followed by annealing and/or tempers rolling...

Martes 05 septiembre 2023

Description of Cold Rolled Coil Cold rolled coil, as known as CR coil, CRS or CRC. Cold rolled steel coils are a farther product that uses hot rolled steel coils to do further processing. The further processed steel coil put in a cold rolling mill where the material is cooled (at...)

Sábado 02 septiembre 2023

As large-size (thickness range 400-750mm) and high-polished plastic mold steel, HS 2343ESR-S, as a 1.2343 steel equivalent material, has higher purity and good structure uniformity through unique smelting and heat treatment process. The hot work steel has good polishing performance...

Sábado 02 septiembre 2023

Cr5Mo1V is high-carbon, medium-chromium, micro-deformed air-quenching die steel and alloy tool steel. Cr5Mo1V steel uses imported A2 steel from the United States, and is the most widely used air-hardening steel in Class A. Cr5Mo1V Steel Chemical Properties Steel Grade C Si Mn...

Sábado 02 septiembre 2023

Cr12Mo1V1 is high carbon and high chromium cold work die steel widely used in the world. It belongs to ledeburite steel. Chemical properties of Cr12Mo1V1 Steel Steel Grade C Si Mn P S Cr Mo V Cr12Mo1V1 1.40-1.60 ≤0.60 ≤0.60 ≤0.030 ≤0.030 11.00-13.00 0.70-1.20 0...

Miércoles 23 agosto 2023

For parts with complex structure, stainless steel 3d printing service can realize integral printing forming, avoiding mass increase and potential quality defects caused by welding forming a complex part after disassembling and manufacturing, and even canceling the assembly of complex parts...

Miércoles 23 agosto 2023

Crawler crane, truck crane, Jib crane, most crane slew ring for crane is customer specific version, Swbtec slewing ring are serving the construction machinery everyday around the world. 1. Slewing Ring For Big Crane Before, slewing ring for crane, especially for big crane, the structure...

Miércoles 23 agosto 2023

Slewing Ring Bearing With External Gear is with gear on the external ring, it is processed by a gear shaping machine. Customer can prefer the gear hardening treatment or not according to the working condition, if it need high load and press, we advise to do hardening treatment. Due...

Miércoles 23 agosto 2023

In the process of turntable slewing bearing use, it will endure 3 different direction force, including the axial force Fa, the radial force Fr and the overturning moment M. The combination of the three loads will change as a result of different working ways and different structural...

Martes 08 agosto 2023

Cantidad : 1K - Precio : 1-1000000usd

Steel is the most widely used and recycled metal material on the planet. From stainless and high-temperature steels to flat carbon products, steel in various forms and alloys offers a wide range of properties to meet a wide range of applications. For these reasons, as well as the...

Sábado 05 agosto 2023

Cas 8001-26-1 Flax Seed Oil/Linum Usitatissimum Seed Oil Linum usitatissimum linseed seed oil is extracted from the linseed by SFE-CO2 Extraction. Cas 8001-26-1 Linum usitatissimum oil is a triglyceride like other fats. Flaxseed oil is distinctive in the fatty acid composition of triglycerides...

Viernes 04 agosto 2023

Precio : USD 2500/T to USD 35

Industrial Aluminum Profile Otalum's served markets also include a variety of industrial and consumer-based markets known as "Industrial Markets". These are comprised of consumer durables, machinery and equipment, electrical and distribution. Otalum supply many prominent manufacturing...