SINTERED - 497 Anuncios

Sábado 02 diciembre 2023

Cantidad : 8000kgs - Precio : USD0.025 - USD1.05

PCD PCBN E-Grind supplies the whole range of PCD blanks and PCDN blanks for cutting tool purpose. The largest Diameter of material PCD and PCDN material blanks available can be 55mm. Our PCD cutting tool blanks and PCDN blanks provide high wearing resistance ability and high finishing surface...

Viernes 01 diciembre 2023

Cantidad : 5000-40,00 - Precio : USD10-USD2,000/pc

The diamond and vitrified CBN are held in place by ceramic components that are fused to form the abrasive part of vitrified bond diamond grinding wheels. Bond grinding wheels made of vitrified material offer high grinding efficiency and excellent wheel shape retention. Vitrified Bond...

Viernes 01 diciembre 2023

Cantidad : 5000-40,00 - Precio : USD10-USD2,000/pc

Metal bonded diamond grinding wheels from Henan E-Grind Abrasives Co., Ltd. can function in a variety of wet or dry situations. Here at Henan E-Grind, we mainly offer two types of metal bond wheels including metal bond CBN grinding wheels and metal bond diamond grinding wheels....

Jueves 30 noviembre 2023

Big blade design: The blades of all PDC drilling series are raised and increased. Using oversized crumb running design can more effectively move drilling dicks, clean the drills, prevent drill bit mud bags, and increase mechanical drilling speed. Anti -rotation design: The mechanical...

Jueves 30 noviembre 2023

PDC matrix bit is a kind of cutting bit that weld the diamond composite piece on the drill head body by brazing. PDC matrix bit is sintered with tungsten carbide powder, brazed on tungsten carbide body with man-made polycrystalline diamond composite sheet, and diameter retaining with...

Jueves 30 noviembre 2023

PDC bit is the abbreviation of Polycrystalline Diamond Compact Bit, also known as Polycrystalline Diamond Cutting Block Bit or Composite Chip Tooth Bit. The bit body of the matrix body pdc bits is sintered by the same method and process as the sintered natural diamond bits and TSP...

Martes 28 noviembre 2023

The lightning thunder resistor for home is the core part of the lightning arrester. It uses zinc oxide as the main component, adding a small amount of bismuth oxide, cobalt oxide, chromium oxide, manganese carbonate, antimony oxide and other trace additives, and is sintered at high temperature...

Viernes 03 noviembre 2023

Cantidad : 1000tons - Precio : 0.01-100 USD/PCS

Material Sintered Neodymium Iron Boron Dimensions Diameter Min.1 mm—Max.60 mm Tolerance Standard +/-0.05mm, Min.+/-0.02mm Magnetization Orientation Axial / Diametrical Magnetic Properties Grade Max. Operating Temperatures N35-N52 80°C (176°F) 33M- 48M 100°C (212°F)...

Viernes 03 noviembre 2023

Cantidad : 1000tons - Precio : 0.01-100 USD/PCS

Sintered neodymium magnet is the strongest magnetic material commercially available today. It is largely made of alloy of neodymium, iron and boron, and the chemical formula is Nd2Fe14B. Sintered NdFeB neodymium magnet exhibits high magnetic energy product in small size with high...

Viernes 03 noviembre 2023

Cantidad : 1000tons - Precio : 0.01-100 USD/PCS

Material Sintered Neodymium Iron Boron Dimensions Outer Diameter Min.3.0 mm—Max.200 mm Inner Diameter Min.1.5 mm—Max.150 mm Height Min.0.5 mm—Max.50 mm Tolerance Standard +/-0.05mm, Min.+/-0.01mm Magnetization Orientation Axial, Diametrical, Radial Magnetic Properties Grade Max...

Miércoles 01 noviembre 2023

SmCo disc magnets perform extremely well in high temperatures. These SmCo magnet discs are very strong magnets and are available in diferent sizes, They belong to the permanent rare earth magnet group. The discs are typically circular in shape and come in various sizes and thicknesses...

Sábado 21 octubre 2023

Category Rod/Cylinder Magnets Material&Grade Sintered NdFeB, N45 Dimension D5 x 25mm Magnetized Axially(poles on flat ends) Coating NiCuNi Strength approx. 1.1kg Weight(1 piece) 3.7g Tolerance +/-0.05mm Max.Working Temp. 80℃ Central Surface Field 6800Gauss...

Sábado 21 octubre 2023

Category Rod/Cylinder Magnets Material&Grade Sintered NdFeB, N35 Dimension D15 x 100mm Magnetized Axially(poles two ends) Coating NiCuNi Strength approx. 8.2 kg Weight(1 piece) 130 g Tolerance +/-0.05mm Max.Working Temp. 80℃ 15x100mm Large Neodymium Cylinder...

Sábado 21 octubre 2023

Category Sphere Magnet Material Sintered Neodymium, N42 Dimension 15mm Magnetized Axially(poles at two points) Coating NiCuNi Strength approx. 4.8kg Weight(1 piece) 16g Tolerance +/-0.05mm Max.Working Temp. 80℃ 15mm Neodymium Spherical Magnets Description 15mm...

Viernes 13 octubre 2023

Cantidad : 200 tons - Precio : 25usd-100usd

Tungsten powder is the main raw material for processing powder metallurgy tungsten products and tungsten alloys. Pure tungsten powder can be made into silk, rod, tube, plate and other processing materials and certain shape products. Tungsten powder mixed with other metal powder can...

Viernes 13 octubre 2023

Cantidad : 200 tons - Precio : 25usd-100usd

Tungsten tube, namely pure tungsten tube, is one of the main pure tungsten products. The purity of tungsten tube produced from medium tungsten can reach more than 99.95%. Because the production process is different, the density will be different. The density can reach 18.2g/cm3 if...

Viernes 13 octubre 2023

Cantidad : 200 tons - Precio : 25usd-100usd

HSG METAL is a professional tungsten rod manufacturer and tungsten rod factory in China. Pure tungsten rod is made of 99.95% tungsten powder. Its physical properties are as follows: density 19.3g/cm3, melting point (liquid) 3422°C, conductivity 30% IACS Min, hardness 69HRA Min....

Martes 10 octubre 2023

Cantidad : 700 tons/y - Precio : $4-10/kg

In the field of electronics, PTFE moulded rod is often used in semiconductor manufacturing process chip packaging, electronic components protection and other aspects. Because PTFE molded rod has good high temperature resistance and corrosion resistance, it can improve the reliability...

Martes 10 octubre 2023

Cantidad : 700 tons/y - Precio : $4-10/kg

PTFE rods and tubes are sintered with PTFE suspension resin after moulding or hydraulic pressing, or extruded with PTFE presintered disperse resin by plunger. PTFE is commonly known as the king of plastics. It has many excellent features. PTFE molded parts have corrosive medium fluid piping...

Viernes 29 septiembre 2023

MIM stand for metal injection molding china, it's a forming method of a metal parts and can provide a nearly unlimited shape, geometric-feature capability, high-production rates through the use of multi-cavity tooling. Compared with conventional technology like press sintered and CNC...

Martes 12 septiembre 2023

What Is an Abrasive Material? Being one of the largest abrasive material suppliers, we focus on the quality size distributions for different applications. Brown Fused Alumina: Two production lines of one Barmac crusher and one roller crusher can guarantee a stable supply for our customers...

Jueves 07 septiembre 2023

TSP diamond is made of diamond micro powder and a small amount of binder sintered under high temperature and high pressure. It has high wear resistance, strong impact toughness, good thermally stability, and dense structure, and is widely used in the manufacture of petroleum, geological...

Jueves 07 septiembre 2023

E-Grind produces high-quality Polycrystalline diamond composite(PDC) and polycrystalline diamond compact cutters. Polycrystalline diamond composite(PDC China) sheet is made of diamond particles and cemented carbide matrix sintered at 60,000 atmospheres, high temperature and high pressure...

Miércoles 06 septiembre 2023

Category: hard ferrite magnets/ china ceramic magnets Advantages: coercive force is high;strong resistance to demagnetization,suitable for dynamic working magnetic circuit structure;good corrosion resistance,surface treatment not needed Disadvantages: low magnetic energy; not resistant...

Miércoles 06 septiembre 2023

Category: AlNiCo magnets/metal perpament magnets Advantages: high magnetic energy, good temperature stability Disadvantages: very low coercive force,easy to be demagnetized, magnetic circuit design can not use thin disc magnets, and must be assemblied first then overall magnetized...

Miércoles 06 septiembre 2023

PDC cutters used for PDC bit, PDC hole opener, PDC reamer Overview of PDC cutter PDC drill bit cutters are made of diamond micro-powder and cemented carbide substrate sintered under ultra-high pressure and high temperature. It has high hardness, high wear resistance and thermal conductivity...

Miércoles 06 septiembre 2023

The PDC Core bit has designed a shallow parabolic profile and medium cutter density for coring the medium hard formation. Nozzles options according to the hydraulic request, it is installing the size of the mainly PDC cutter is 1308mm, and the most popular blade is 6 blades, 7 blades...

Martes 05 septiembre 2023

Anode Carbon Block Overview It participates in electrochemical reactions and directs current into the electrolytic cell. Each prebaked carbon anode block is preassembled by 1 ~ 3 anode carbon blocks, anode guide rod and steel claw (see anode carbon block assembly). The single anode...

Miércoles 30 agosto 2023

Magnetic Performance: Br: 10.4 kGs, Hcb: 9.8 kOe, Hcj: 10.6 kOe, (BH)max: 26 MGOe Magnetic Strength: 31 LBS each Pole Orientation: Magnetized through 1/2", magnetic poles are on the 2x1/2" surfaces Maximum Operating Temperature: 608 degree F or 320 degree C MEANK produces high-quality...

Miércoles 30 agosto 2023

Cantidad : 500tons - Precio : USD0.015-USD100

Meank provides powerful rare earth big neodymium magnets for sale at good wholesale prices. Our rare earth giant neodymium magnets for sale have higher energy products and are known as NdFeB strong magnets or powerful NdFeB magnets. As the third generation rare earth magnet, neodymium magnet...