DIAMETER - 10924 Anuncios

Martes 10 octubre 2023

Cantidad : 700 tons/y - Precio : $4-10/kg

Self Adhesive PTFE Sheet PTFE surface itself is not adhesive, such as want to bond and other substances must need one side and two sides after Nana chemical treatment, and rubber, metal, and other substances bond, in special use, make up for the non-adhesive performance of polytetrafluoroethyle...

Martes 10 octubre 2023

Cantidad : 700 tons/y - Precio : $4-10/kg

PTFE Molded Sheet PTFE is divided into molded plate and turning plate two categories. The molded plate is made of PTFE suspension resin by molding and sintering; Turning plate is the blank of PTFE suspension resin formed by molding or hydraulic method and then turning or rotary cutting...

Martes 10 octubre 2023

The overall 304 stainless steel material, anticorrosive, acid-proof rust, cage material thickness of 1.2mm, cage door with diameter of 8mm and 6mm steel wire composition, foot mesh with diameter of 10mm and 4mm steel wire composition, connect the sewage plate material thickness of 0...

Martes 10 octubre 2023

The overall 304 stainless steel material, anticorrosive, acid-proof rust, cage material thickness of 1.2mm, cage door with diameter of 8mm and 6mm steel wire composition, foot mesh with diameter of 10mm and 4mm steel wire composition, connect the sewage plate material thickness of 0...

Martes 10 octubre 2023

The overall 304 stainless steel material, anticorrosive, acid-proof rust, cage material thickness of 1.2mm, cage door with diameter of 8mm and 6mm steel wire composition, foot mesh with diameter of 10mm and 4mm steel wire composition, connect the sewage plate material thickness of 0...

Martes 10 octubre 2023

Super precision components are Key to Keyto's cutting-edge product lines. A 3mm Diameter 316 Stainless Steel filler shown below is demonstrating the Keyto's best Machining skill, in such a small area, 110 nos 150 Micrometer holes were produced in order. However 150 Micrometers is not the limit...

Martes 10 octubre 2023

The solenoid valve of 1021 series is a family of diaphragm valve with 2mm orifice diameter which developed by keyto. Its function is controlling the on/off of fluid flow path. This series solenoid valve is a high performance, low cost and maintenance free diaphragm valve with multiple...

Lunes 09 octubre 2023

DEED horizontal machining center with pallet changer mainly used for the processing of box, shell, and special-shaped parts in automobiles, motorcycles, especially auto engine shell, reducer shell, mold, and general machinery industries. Our horizontal machining center for sale is...

Lunes 09 octubre 2023

The X/Y/Z servo axis adopts the servo motor direct connected precision planetary reducer to drive the large-diameter, high-precision double nut preloaded ball screw. The planer type horizontal boring and milling machine tool guide rail adopts the roller linear rolling guide rail pair...

Lunes 09 octubre 2023

The CNC horizontal turning lathe center bed adopts "mineral casting" material and technology of Germany, which guarantees DEED CNC horizontal turning center with better performance on accuracy maintenance and stability for a longer time. DEED model HP800-WC cnc turning machine for...

Lunes 09 octubre 2023

HBC Series is our CNC horizontal boring and milling machine. According to the different sizes, we have HBC1116 CNC boring machine and HBC1316 CNC horizontal boring machine. We introduce German mineral casting material for our horizontal boring and milling center base and column. CNC...

Lunes 09 octubre 2023

Vt series CNC tapping machine center is a vertical drilling center independently designed and developed by our company. The CNC drilling and tapping machine center has the structural characteristics of high speed, high precision, high rigidity, and high reliability. CNC drill tap...

Lunes 09 octubre 2023

Ⅰ. ABS Injection Molding Processing Performance (1) Because of the strong moisture absorption as well as high water content of ABS, the plastic parts that are made of ABS have low gloss and poor internal quality. As a result, ABS injection molding should be dried so that the water...

Lunes 09 octubre 2023

Cantidad : 10 hq cont

China Manufacturer Price Disposable Double Wall Coffee Tea Paper Cup with Lid Disposable insulated corrugated sleeve ripple wall paper cup for drink，hot coffee cups. perfect for the coffee room at the office, or for restaurants, convenience stores, and gas stations; great for storing...

Lunes 09 octubre 2023

Description of Individually Wrapped Paper Straws Wholesale Equipped with 100 biodegradable straws individually wrapped and adjustable suction heads, it is very suitable for daily drinkings, such as fruit juice, milkshake, smoothie, and iced coffee. Plastic straws can take hundreds...

Lunes 09 octubre 2023

Steel Searcher-Steel Pipe having a hollow section much longer than its diameter or circumference. According to the sectional shape, structural steel can be divided into round steel pipe, square steel pipe, rectangular steel pipe and special-shaped steel tubes; According to the structural...

Lunes 09 octubre 2023

Pancreatic Pseudocyst Stents Pseudocyst Stents The Pancreas pseudocyst plastic biliary stent is used for reliable drainage of endoscopic removal of concrement. The design of the stent with its distal umbrella form and proximal tulip causes that during an eventual migration only a...

Domingo 08 octubre 2023

Cantidad : 200sets、50 - Precio : $60~$20,000

According to the application characteristics of the supporting electric control cabinet, a special product is developed to enhance environmental tolerance and the protection level. Installed in the electric control cabinet can effectively avoid the secondary pollution of other equipment...

Domingo 08 octubre 2023

Cantidad : 130000 pcs - Precio : $0.02~$0.40 per piec

The thread length of the extended cable gland, a kind of metric gland connectors, is 15-20mm, which is suitable for relatively thick distribution boxes or electrical panels. When the length of the normal size cable glands is not long enough to fit the lock nut, in this case, a long...

Viernes 29 septiembre 2023

Carbon steel wire refers to very high strength and hardness. Compared to other steel wire, its cutting ability of diamond cup brush and cup steel brush is stronger, but the toughness will be slightly less. However, the carbon steel wire itself has a lower cost, so the price of this...

Viernes 29 septiembre 2023

Number of layers: 8 Surface finish: ENIG Base material: FR4 Outer Layer W/S: 4/3mil Inner layer W/S: 4/3mil Thickness: 1.2mm Min. hole diameter: 0.2mm Special process: impedance control Advantages Of 8 Layer PCB Own lamination process to convenient production for Multilayer PCB and...

Viernes 29 septiembre 2023

Cantidad : 2 containe - Precio : USD100-5000

OPGW Fiber Optic Cable As a top opgw cable supplier, HONREY CABLE's OPGW cable is mainly used in overhead power lines. there are three main categories: aluminum tube type, aluminum skeleton type and (stainless) steel pipe type. The conductor opgw has the functions of ground wire...

Viernes 29 septiembre 2023

Cantidad : 2 containe - Precio : USD100-5000

LV Aerial Bundled Cable (IEC60502) In order to be used in a system with a maximum working voltage of 600/1000V, the assembled insulated conductor must be suitable. A system's standard operating voltage must not be greater than 600/1000V for the assembled insulated conductor to be...

Viernes 29 septiembre 2023

With the rapid growth of consumer electronics and mobile phone markets, the performance of mini lens has become more challenging compared to many years ago. However, manufacturing costs, packaging, and imaging quality of mini lens pose unique challenges to optical designers. TeSoo...

Jueves 28 septiembre 2023

Cosmetics Cream Glass Bottles and Jars The G864AM is a 2 oz amber glass straight-sided round jar with 53-400 neck finish. Straight-sided jars have a wide mouth, thick walls, and a relatively square base. This container is amber, a rich and vibrant orange-brown. In the case of glass...

Jueves 28 septiembre 2023

It is one of the hot glue sticks types that is commonly sold as solid cylindrical sticks of various diameters designed to be applied using a hot melt glue gun. The glue is squeezed out of the heated nozzle and remains sticky, and solidifies in a few seconds to one minute. There are...

Jueves 28 septiembre 2023

High-Quality microwavable clear plastic disposable soup bowls with lids of EASY GREEN for hot food Takeaway, disposable plastic bowl with lid PP with lids, use for hotel, restaurant, Home daily use, tableware Hotel, restaurant, Home daily use. include 500ML,600 ML ,700ML,1400ML...

Jueves 28 septiembre 2023

Easy Green provides different disposable biodegradable trays with lids bulk at reasonable wholesale prices. Wholesale biodegradable sugarcane trays from Easy Green include plastic sushi trays with OPS lid, sugarcane biodegradable sushi containers with PET lid, plastic party trays for sushi...

Jueves 28 septiembre 2023

Precio : USD0.1~3.00

The production process of a glass jar/bottle refers to a series of action combinations (including mechanical, electronically controlled, etc.) that are repeated in a given programming sequence with the goal of producing a jar/bottle of the desired shape. Products Description At present...

Miércoles 27 septiembre 2023

Cantidad : 6000 sets/ - Precio : 4000-600000USD

Lasers are widely used in medical device manufacturing. Including medical laser marking, welding, cutting, and micromachining. Products made from medical co2 laser machines such as medical bed, trolley, automated dispensing cabinets, storage racks, storage chambers, examination chairs...