INJECTIONS - 4401 Anuncios

Sábado 09 julio 2022

Pa6gf50 is a fiber reinforced plastic made of nylon 6 resin as a base material and 50% glass fiber as a reinforcing filler, and various processing aids be added. Typical Application of PA6 GF50 (A1011J) PA GF50 is used to manufacture high-strength and high wear-resistant structural...

Sábado 09 julio 2022

Polyamide 6 reinforced with 45% Glass Fibers that is PA GF45, medium viscosity and dimensional stability, this material pa 6 has excellent rigidity and high tensile and compressive strength successfully applying to engineering structure parts of mechanical engineering and in the automotive...

Sábado 09 julio 2022

Cantidad : 50 units/m - Precio : 80,000~180,000

TYD series servo electric cylinders can work in a harsh environment for a long time without failure, and achieve high-intensity, high-speed, and high-precision movement. With smooth movement and low noise, the unique anti-rotation function ensures the high-precision position control...

Jueves 07 julio 2022

HTV quality or high-temperature vulcanized silicone rubber is used in the compression molding press. Special silicone rubber materials are chosen based on their intended use, whether they need to be fire, oil, or heat resistant. Food and medical qualities have FDA and BFR approvals...

Sábado 02 julio 2022

LCM series long-bag offline pulse dust remover is the result of fieldwork research technology experience of our company for more than ten years. Long bag off-line pulse duster technology and products integrate the world's most outstanding long-bag offline pulse dust removal technology...

Sábado 02 julio 2022

Single-pulse jet bag filter is widely used in mining, electric furnace smelting, machinery manufacturing, chemical products, cement, building materials, grain processing and other industrial and mining enterprises warehouse top, bottom, belt transmission and local dust source dust...

Sábado 02 julio 2022

Baghouse Dust Collector for Sale Main Parts of Bag House Filter 1 electromagnetic pulse valve 2 pulse controller 3 filter bag cage 4 dust filter bag 5 spray ash cleaning Baghouse filter is the use of new bagged filter media to capture dust in dust gas dry dust removal equipment, Baghouse...

Sábado 02 julio 2022

Now, we provide various types of extension sets, including iv extension set with injection port, iv extension set with luer lock, microbore extension set, small bore extension set, syringe extension set, y extension set, etc. Introduction Of Extension Sets The extension sets are assembled...

Sábado 02 julio 2022

Dental Needles Manufacturing The dental injection needles, also named disposable dental needles and tooth needles, are assembled by hub, needle tube, protective cap. Disposable dental needles are intended to be used in anesthesia in dentistry, for which people also call dental anesthesia needles...

Sábado 02 julio 2022

Mould Spare Parts Plastic mold accessories include single section shoot, double section shoot, double section shoot, flat tip, flat tip, positioning column, plastic mold guide sleeve, straight sleeve, middle column sleeve, plastic mold guide sleeve, etc. Features of Mould Spare Part...

Sábado 02 julio 2022

Mould Slide The mould slider is a mold component that can slide in a certain angle perpendicular to or with the opening and closing direction during the opening and closing action of the mold. Features of Mould Slide When the product structure makes it impossible for the mold to demould...

Sábado 02 julio 2022

Mould Component Mould Components are also a part of the mould. GM-TECH not only produces precision moulds but also provides customers with high-precision, low-cost mould parts. For example mould cores, inserts, sliders, lifter, wear plates, ejector pins, etc. Usually, processing accuracy...

Sábado 02 julio 2022

Mould Base After years of development, mold base production industry has been quite mature. Large plastic injection molding companies can purchase customized mold base according to individual mold needs, and also choose standardized mold base products. Features of Mould Base The standard...

Sábado 02 julio 2022

Insert molding is a precision injection molding process used to encapsulate a component in a plastic part. The insert plastic injection molding process can be divided into two basic steps. First, the component is loaded into the mold before the molding process. Second, it takes the...

Sábado 02 julio 2022

Injection Moulding Products GM-TECH has been manufacturing tools for injection molding of plastics for various industries for more than 10 years. We are also experienced in the automotive, electrical, and home appliance industries but also manufacture moulds for other industries requiring...

Sábado 02 julio 2022

Home Appliance Part The development and design of plastic injection molding home appliance parts pay attention to safety and health. In-home appliance industry, polypropylene plastics are used extensively in washing machines and dishwashers. As one of the leading plastic injection...

Jueves 30 junio 2022

Restylane LYFT Lidocaine: 1ml pre-filled syringe Lidocaine hydrochloride 3mg/ml Restylane Lyft Lidocaine is safe hyaluronic acid gel of non-animal origin designed for the correction of age-related midface contour deficiencies and treat moderate-to-severe wrinkles and smile lines,...

Jueves 30 junio 2022

Reyoungel Fine With the smallest particles for the correction of very thin, superficial lines.Injected in the upper part of the dermis.For correction of thin superficial lines, such as worry lines, periorbital lines, perioral lines. Injection Sites: Upper part of dermis Needle Size...

Jueves 30 junio 2022

Reyoungel Derm Medium particle size for moderate wrinkles. Injected in the middle part of the dermis.For treatment of moderate wrinkles, such as glabellar, oral commissures.Lips: fullness, pouting and vermilion border. Injection Sites : Middle part of dermis Needle Size: 30G HA Concentration...

Jueves 30 junio 2022

Reyoungel Deep : Larger particles for deep folds. Injected in the deep layer of the dermis and/or the surface layer of the subcutis. For correcting deep folds, creating fuller lips and shaping facial contours, such as cheeks and chin. Injection Sites : Deep layer of dermis and/or...

Jueves 30 junio 2022

Cross-linked Hyaluronic acid gel (BDDE) 21mg Volume & Packaging 2 x 1ml pre-filled syringe. Stylage XXL is a single use product, each box contains two 1ml syringes of Stylage XXL, 3 sterile needles, 1 singel use cannulas, an instruction leaflet, and labels with the batch number...

Jueves 30 junio 2022

Cross-linked Hyaluronic acid gel (BDDE) 20mg Lidocaine hydrochloride 3mg Volume & Packaging 2 x 1ml pre-filled syringe. Stylage M lidocaine is a single use product, each box contains 2 x 1ml-syringes of Stylage M lidocaine, 4 sterile single use needles, an instruction leaflet...

Jueves 30 junio 2022

Cross-linked Hyaluronic acid gel (BDDE) 24mg Lidocaine hydrochloride 3mg Volume & Packaging 2 x 1ml pre-filled syringe. Stylage L lidocaine is a single use product, each box contains two 1ml syringes of Stylage lidocaine, 4 sterile single use needles, an instruction leaflet, and...

Jueves 30 junio 2022

Macrolane VRF 20 is suitable for areas with less tissue support and cover. Available syringe size: 1 x 10 ml Macrolane is a hyaluronic acid-based product for body contouring and breast enhancement. Macrolane provides instant and long lasting results without the need for open surgery...

Jueves 30 junio 2022

Macrolane VRF 30 is a thicker gel suitable for areas with substantial tissue support and cover. Available syringe size: 1 x 10 ml Macrolane is a hyaluronic acid-based product for body contouring and breast enhancement. Macrolane provides instant and long lasting results without the...

Jueves 30 junio 2022

Belotero is a sterile, non-pyrogenic, viscoelastic, colorless, transparent gel of non-animal origin. The gel is made of cross-linked sodium hyaluronate in a physiological phosphate buffer, and will over time undergo slow resorption thanks to a better resistance to degradation. Belotero...

Jueves 30 junio 2022

Belotero is a sterile, non-pyrogenic, viscoelastic, colorless, transparent gel of non-animal origin. The gel is made of cross-linked sodium hyaluronate in a physiological phosphate buffer, and will over time undergo slow resorption thanks to a better resistance to degradation. Belotero...

Jueves 30 junio 2022

Belotero is a sterile, non-pyrogenic, viscoelastic, colorless, transparent gel of non-animal origin. The gel is made of cross-linked sodium hyaluronate in a physiological phosphate buffer, and will over time undergo slow resorption thanks to a better resistance to degradation. Belotero...

Jueves 30 junio 2022

Active Composition:Hyaluronic acid gel (24mg/ml). Lidocaine hydrochloride (3mg/ml). Volume & Packaging: 2×0.55 ml pre-filled syringe Storage Conditions: Store between 2℃ and 25℃. JUVÉDERM ULTRA 2 is a sterile, pyrogenic-free, physiological solution of cross-linked hyaluronic acid...

Jueves 30 junio 2022

Active Composition:Hyaluronic acid gel (20mg/ml). Lidocaine hydrochloride (3mg/ml). Volume & Packaging: 2 x 1ml pre-filled syringe. Storage Conditions: Store between 2℃ and 25℃. JUVÉDERM VOLUMA with Lidocaine is a sterile pyrogen-free physiological solution of cross-linked hyaluronic...