TREATMENTS - 8464 Anuncios

Martes 22 agosto 2023

Precio : USD1500 to USD3000

Used in concrete sealing curing agent, waterproof coating, powder coating, wear-resistant materials, glass system, molten salt system and high temperature ceramic glaze is also used as steel and other surface rust coating. Used as a binder mainly for inorganic zinc rich coatings and...

Martes 22 agosto 2023

Precio : USD1500 to USD3000

Dewatering agents are chemicals used to reduce the water content of a material. They are typically used in industrial processes, such as wastewater treatment, to reduce the amount of water that needs to be removed from a material. Dewatering agents work by either absorbing the water...

Martes 22 agosto 2023

Precio : USD1500 to USD3000

Coagulant is a chemical substance that causes particles in a liquid suspension to form a gel or a solid mass. It is commonly used in water treatment, wastewater treatment, and chemical processing to remove suspended solids from liquids, to reduce the amount of solids in a solution...

Martes 22 agosto 2023

Precio : USD1500 to USD3000

Bactericidal Algicide is a powerful disinfectant and algicide that kills bacteria and algae. It is suitable for use in a wide range of water systems, including swimming pools, hot tubs, spas, cooling towers, and water tanks. It is effective against a wide range of bacteria, including E...

Martes 22 agosto 2023

Precio : USD1500 to USD3000

Adsorbent is a material that has the ability to attract and hold molecules, ions, or particles on its surface. It is commonly used in a variety of applications, such as water purification, air filtration, and industrial waste treatment. Adsorbents are available in a variety of forms...

Martes 22 agosto 2023

Precio : $8.00-$300.00/pc

Direct acting pressure relief valve, also known as direct-acting pressure relief valves, are hydraulic valves that are designed to relieve excessive pressure in a hydraulic system. They operate based on the principle of direct pressure sensing and actuation. 2500 psi hydraulic pressure...

Martes 22 agosto 2023

cat antigen rapid test parasite test for cats, worm test for cats intestinal parasite screening cats cat parasite test,cat worm test and intestinal parasite screening cats stool ag test The Feline Range Rapid Test is a rapid detection method that can determine the types of respiratory...

Domingo 20 agosto 2023

Materiales antiguos Acero para moldes Material Acero inoxidable, acero al carbono, acero aleado, aleación de aluminio, cobre, titanio. Estándar de película Recubrimiento en polvo: 60 - 120 micras, película electrolítica: 12 - 25 micras. Peso de la pieza De 10 a 100 kilogramos. Tratamiento...

Viernes 18 agosto 2023

Medical manufacturing refers to the production and distribution of medical devices, equipment, and supplies used in the healthcare industry. It involves a complex process that includes the design, development, testing, and production of medical products. This includes a wide range...

Viernes 18 agosto 2023

Why is Titanium So Hard to Machine? Titanium cnc service, as a challenging material, has a unique combination of properties in terms of high strength, high temperature, chemical reactivity, and elasticity. Due to its strength and tendency to harden during processing, it is difficult...

Viernes 18 agosto 2023

Swiss machining is a specialized type of precision machining that involves the use of a sliding headstock lathe to produce intricate parts with high accuracy and tight tolerances. This process is particularly well-suited for small, complex parts that require multiple operations...

Viernes 18 agosto 2023

Automotive Precision Machining CNC machining technologies are widely used in the automotive industry to manufacture high-quality automotive parts that are both cost-effective and efficient. With over 28 CNC technologies in use, including 5 axis machining, milling and turning, micro machining...

Viernes 18 agosto 2023

Aluminum is a popular material for Swiss machining due to its excellent strength-to-weight ratio, corrosion resistance, and versatility. At Falcon, we utilize Swiss type lathes to achieve incredibly precise tolerances and complex shapes. Our aluminum machining services are highly...

Miércoles 16 agosto 2023

The flange locking bolt is an integral bolt composed of a hexagon head, a flange, and a screw. According to the different positions of the china flange bolt , the size requirements of the flange are different, and there are flat bottom and toothed ones, and the toothed ones play an...

Martes 15 agosto 2023

Custom lost wax casting stainless steel Different from aluminum ingots for aluminum die casting, the material for stainless steel casting is derived from the recycled and smelted scraps. According to the chemical composition ratio of stainless steel, the foundry controls the input...

Martes 15 agosto 2023

Electrophoresis (cathodic dip coating), another German name KTL-Beschichtung (Kathodische Tauchlackierung) is a widely used surface treatment process. It mainly plays the role of substrate anti-corrosion and surface decoration. Electrophoresis was first used for automotive. Later...

Martes 15 agosto 2023

Electrical Discharge Machining Services Abrasive electro discharge machining in Sibai is a service used to assist CNC machining. We have one Electrical Discharge Machine and reliable partners, which equipped with more advanced Electrical Discharge Machines, and currently we mainly...

Sábado 12 agosto 2023

Category and Working Principle Wire cable grip puller, wire rope cable puller including hand puller, ratchet puller, double hook tightener and cable grip. Ratchet puller, in other name,ratchet wire tensioner, also known as ratchet hand hoist, is a tool used to tighten steelstrand...

Martes 08 agosto 2023

The three-piece low-temperature ball valve socket weld belongs to the three-piece low-temperature ball valves series. The valve body is composed of three sections. The two ends are socket welding connection surfaces. After special low-temperature treatment, the temperature resistance...

Martes 08 agosto 2023

Precio : 2.8-3.2USD

Plastic molds are tools that are matched with plastic mold making machines in the plastic processing industry to give plastic products a complete configuration and precise dimensions. Due to the wide variety of plastics and processing methods, and the complex and simple structures...

Martes 08 agosto 2023

Machining Technology Machining parts products are a series of processes making a blank (work-piece) into the exact shape designed or wanted. As a professional precision machining service supplier in China, HQ has multi-axis CNC machines and tons of experience that enable us to produce...

Martes 08 agosto 2023

Punica granatum L. is a tree belonging to the Punicaceae family grown in Iran, Afghanistan, Turkey, the USA and China. Pomegranate juice is popular, especially the punicalagin is claimed to have antibacterial, anticancer, antioxidant, antiallergic and anti-inflammatory properties...

Martes 08 agosto 2023

Panax Ginseng has always been regarded as the "King of Herbs". The panax ginseng extract is a famous rare medicine. China is the first country in the world to use Panax Ginseng and record it in writing. The Chinese character "Ginseng" can be found carved on the armor in the “Oracle...

Martes 08 agosto 2023

Mangosteen mainly grows in Southeast Asia. The mangosteen extract is dark purple or red. The fruit pulp is slightly acidic and sweet. All parts of the mangosteen, including the seed, pericarp, leaves, and bark, have long been used for medicinal purposes such as the treatment of...

Martes 08 agosto 2023

On the mounted flap wheel for drill, the flap made of coated abrasive is arranged radially around the tool axis in a fan-shaped structure. Their flexibility enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible cloth...

Martes 08 agosto 2023

The flexibility of 8 inch flap wheel enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible cloth backing material through a resin adhesive. Flap Wheel 3/8inch Specification: Diameter: 3/8 inch=10mm Max. RPM: 25000 RPM Raw Materials...

Martes 08 agosto 2023

On the mounted abrasive flap wheel, the flap made of coated abrasive is arranged radially around the tool axis in a fan-shaped structure. Their flexibility enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible cloth backing...

Martes 08 agosto 2023

On the Mounted Small Flap Wheel, the flap made of coated abrasive is arranged radially around the tool axis in a fan-shaped structure. Their flexibility enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible cloth backing...

Martes 08 agosto 2023

On the Mounted Emery Flap Wheel, the flap made of coated abrasive is arranged radially around the tool axis in a fan-shaped structure. Their flexibility enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible cloth backing...

Martes 08 agosto 2023

On the Mounted Flap Wheel, the flap made of coated abrasive is arranged radially around the tool axis in a fan-shaped structure. Their flexibility enables them to fully adapt to the contour of the workpiece. Abrasive particles are embedded in a strong and flexible cloth backing material...