PROPERTIES - 6482 Anuncios

Domingo 07 mayo 2023

Cantidad : 100k - Precio : $0.005-$3.4

PCB board to board connectors and SMD board to board connectors are used to accurately interconnect printed circuit boards (PCBs) in a stackable manner. They can accommodate various types of PCB orientations, relative distances, and space constraints to allow for design flexibility...

Domingo 07 mayo 2023

Drum paint cap is a type of cap used during production of steel drum. Its main function is to prevent paint entering drum inside during drum painting process. It needs to be put into drum flange on drum top before painting, and be removed after steel drum comes out of the oven. Due...

Domingo 07 mayo 2023

Steel drum plastic bung is G2 and G3/4'' plug type with ISO-228 thread, can well suit into drum flange on 55 gallon steel drums. It is a substitute for zinc plated drum plug in some cases. Whatever the material is, the bungs are aiming at reducing the risk of spillage and keeping...

Domingo 07 mayo 2023

The drum pump faces a wide range of challenges as different features of fluids transferred. Chongyi views the safety of people and environment as being of particular importance. Selecting and supplying the right pumps for our customers is always our mission to do. Different from construction...

Domingo 07 mayo 2023

Cantidad : 1,000,000, - Precio : USD0.01-0.5/1pc

The magnesium ampoule injectable made of neutral borosilicate glass tubing manufacturered by our company is manufacturered by imported automatic vial forming machine and imported neutral glass tubing. Due to its good physical and chemical properties, it has good compatibility with...

Sábado 06 mayo 2023

Cantidad : 30 cartons

Eco-friendly 100% PET abd PP disposable fruit tray, widely used at Fruit, Meat and Vegetable Super market Pack. Lesui is one of the One -stop disposable food tray suppliers for all range of china biodegradable food packaging. Disposable Food Packaging Tray Types Disposable food packaging...

Sábado 06 mayo 2023

Cantidad : 30 cartons

In order to keep fresh fruit and vegatable, through the combined effect of modified atmosphere and humidity and condensation control to preserve freshness to effectively slows down the respiration of fresh produce, inhibits microbial decay and minimizes weight loss and shriveling...

Sábado 06 mayo 2023

Magnetic eddy current separator machine is also known as non-ferrous separators, which uses the induction principle (eddy current) of a high-frequency magnetic field to separate non-ferrous metals. High-capacity permanent magnet drum traveling at a high speed inside an eddy current...

Sábado 06 mayo 2023

Cantidad : 300,000 PC - Precio : 10usd-100usd

Shijin alloy quartz watch and alloy case watch are made of two or more metals or metals and non-metals that are melted or sintered or combined by other methods to form a substance with metallic properties. Alloys usually use a combination of various materials to improve alloy watch...

Sábado 06 mayo 2023

Precio : 100USD

Dental PEEK Material R&D Series has good wear resistance and high mechanical strength. It is mainly used in dentistry in medical field. Specification of Tooth materials PEEK Teeth R&D Series If you want to know more details of peek dental material pdf and peek in dentistry ppt...

Sábado 06 mayo 2023

Precio : 100USD

The material is obtained by grinding the coarse powder (D50 is 13 micron ~ 75 microns) . It can be used as moulding material, spraying material and composite modified pre-dispersion. Types of Grade PF PEEK Pure Resin Fine Powder ZYPEEK Supplier PF Series-770PF PEEK Pure Resin Fine...

Sábado 06 mayo 2023

Precio : 100USD

With good toughness and impact resistance, Grade G peek pellets can be disinfected using steam, ethvi and rays, etc. You can see the wide uses of PEEK resin in the medical, pharmaceutical, and food processing industries. Grade G Polyetheretherketone Resin Pellets from ZYPEEK G Series-770G/770GH...

Sábado 06 mayo 2023

Precio : 100USD

PEEK-GL series, is a glass fiber composite modified natural PEEK materials, currently available from 5% -35% of different mass fractions of reinforced materials. Compared with pure resin particles, it has better rigidity, better creep resistance and dimensional stability. Types of...

Sábado 06 mayo 2023

Cantidad : 200 - Precio : 200000-800000

The equipment adopts advanced laser tool welding technology, and the overall operation is simple. The touch screen is used to control the operation technical parameters of the equipment, which can automatically complete multiple processes such as feeding, cutting, welding and unloading...

Sábado 06 mayo 2023

Precio : 100USD

PEEK-FC series modified by PTFE, graphite and carbon fiber have lower friction coefficient, wear resistance and self-lubrication than pure resin G. Types of Grade FC Super Wear Resistant PEEK ZYPEEK Supplier FC Series-330FC30 PEEK Super Wear Resistant FC Series-770FC30/770FE20/770FE20H...

Sábado 06 mayo 2023

Precio : 100USD

Polyetheretherketone PEEK has outstanding heat aging properties, good flame retardancy, self-extinguishing, hydrolysis resistance, corrosion resistance, stripping resistance, fatigue resistance, radiation resistance, and good electrical insulation, still keeps lower dielectric constant...

Sábado 06 mayo 2023

The microstructure of duplex stainless steel pipe is approximately 50% ferrite (body-centered cubic structure) and 50% austenite (face-centered cubic structure) crystal structure. The two phases coexist as a stable mixture, but this is different from two-phase alloys, where one of...

Sábado 06 mayo 2023

Precio : $700-1100/MT

Black silicon carbide is made of quartz sand and petroleum coke as the main raw materials, and is smelted at high temperature in a resistance furnace. It is black crystal, brittle and sharp, and has certain thermal and electrical conductivity. Black Silicon Carbide Powder Specifications...

Sábado 06 mayo 2023

Precio : $700-1100/MT

Being one of the largest abrasive material suppliers in China, we focus on the quality size distributions for different applications. Brown Fused Alumina: Two production lines of one Barmac crusher and one roller crusher can guarantee a stable supply for our customers. Ten melting...

Sábado 06 mayo 2023

Precio : $700-1100/MT

How to Make Boron Carbide Boron carbide is a kind of black crystal with a metallic luster, also known as black diamond, which belongs to inorganic nonmetallic material. At present, everyone is familiar with boron carbide material may be because of the application of bullet-proof armor...

Sábado 06 mayo 2023

ASTM B338/ ASME SB338 Titanium Tube (Ti Tube) has a superior strength-to-weight ratio and corrosion resistance is one of the common titanium products. We generally divide ASTM B338/ ASME SB 338 Titanium tubes into two types, one is called the seamless titanium tube, and the other...

Sábado 06 mayo 2023

ASME SB111 C70600 Tube Copper-nickel alloy that resists seawater corrosion and has high antifouling properties against marine microorganisms. You can find ASTM B111 stainless tubes using ASME SB111 alloy are widely used in shipbuilding repair, petrochemical, natural gas, and other...

Sábado 06 mayo 2023

Nickel alloy is one of the most useful materials for manufacturing technically superior nickel and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloy is exceptionally corrosion-resistant and can be used in high-temperature...

Sábado 06 mayo 2023

ASTM B338/ ASME SB338 Titanium Tube (Ti Tube) has a superior strength-to-weight ratio and corrosion resistance is one of the common titanium products. We generally divide ASTM B338/ ASME SB 338 Titanium tubes into two types, one is called the seamless titanium tube, and the other...

Sábado 06 mayo 2023

ASME SB111 C70600 Tube Copper-nickel alloy that resists seawater corrosion and has high antifouling properties against marine microorganisms. You can find ASTM B111 tubes using ASME SB111 alloy are widely used in shipbuilding repair, petrochemical, natural gas, and other marine engineering...

Viernes 05 mayo 2023

The characteristics of plastic cnc machining china material are defined by the melting point temperature (150 ° to 450 °) and the use environment (ordinary plastics and engineering plastics). When CNC is processing plastic products of plastic CNC service, the material deformation...

Viernes 05 mayo 2023

CNC machining has not too many restrictions on CNC material list. Common plastics, metals, or special materials can be processed, but the processing difficulty is different, the selection of CNC machining cutting tools material and the processing parameters of machine tools are different...

Viernes 05 mayo 2023

DATIAN（DT）Fastener is a leading manufacturing-based Hex Nuts company in China. We, a high-quality hex nut company, have in house heat treatment machine used to change the hardness and mechanical properties of hexagon nut bolt in order to serve various markets. Hexagon nuts are most...

Viernes 05 mayo 2023

Cantidad : 1-1000PCS - Precio : 500-10000￥

Ningbo Cheeven New Materials is one of the China Led FSW Manufacturers and die casting lighting factory.We have a team of die casting lighting to design, develop and manufacture our own luminaries, and offer a superior range of product and service including die cast aluminum outdoor lighting...

Viernes 05 mayo 2023

Cantidad : 1-1000PCS - Precio : 500-10000￥

Copper nickel indium coating is a superalloy powder for aerospace parts coating and 3D printing. Copper-nickel indium coating has excellent powder properties, low oxygen content, high sphericity, good flow properties, and almost no defect powder such as hollow powder and satellite powder body...