VARIANT - 3358 Anuncios

Jueves 10 marzo 2016

Introduction: JL-X waterproof test system is according to IEC60529, IEC60598, IEC60335 and IEC 60034-5: 2000. The JL-X includes the following test grades: IPX1, IPX2, IPX3, IPX4, IPX5, IPX6, IPX7 and IPX8 (Refer to page 51 of IEC60529). It is widely used in the authentication test...

Jueves 10 marzo 2016

Introduction: ZRS-3H The Glow-wire Tester adopts high temperature coating spraying on steel structure, Glow wire tester is to test glow wire of lighting lamps, electronic products and household appliances, and UL 746A, IEC829, DIN695, VDE0471, the Glow wire tester ZRS-3H is suitable...

Jueves 10 marzo 2016

Introduction: It is according to IEC60068-2-1(GB/T2423.1) and IEC60068-2-2(GB/T2423.2). It is used to test the CFL/LED which meets IES LM-80-08, electricity products, electronic components, material and so on. Specification: •The chamber is produced by SUS304 Steel, the temperature...

Jueves 10 marzo 2016

Introduction: Automatic lighting surge generator (or Lighting surge immunity) SG61000-5 is used to assess the power cord and connect the internal switch stood in line to connect the internal switch to provide a common basis for switching the natural world and lightning caused by...

Jueves 10 marzo 2016

Introduction: WT2080 LED Power Driver Test Instrument is the comprehensive test instrument for LED drive power which is according to GB/T 24825-2009 and IEC 62384: 2006. It can measure the following parameters: Input Characteristics Test (AC&DC), Output Characteristics Test (AC...)

Jueves 10 marzo 2016

Introduction: LPCE-3(LMS-7000VIS) is CCD Spectroradiometer & Integrating Sphere Test System, it is suitable for photometric and colorimetric measurement of luminaries such as LEDs, LED luminaires, Energy-saving lamps, Fluorescent lamps, HID lamps (high voltage sodium lamps...)

Jueves 10 marzo 2016

Introduction: LPCE-2(LMS-9000) is high precision CCD Spectroradiometer & Integrating Sphere Test System, it is suitable for photometric and colorimetric measurement of luminaries such as Energy-saving lamps, Fluorescent lamps, HID lamps (high voltage sodium lamps and high voltage...)

Jueves 10 marzo 2016

Introduction: LSG-1800B/LSG-1700B/LSG-1600B Rotation Luminaire Goniophotometer is high precision automatic goniophotometric instrument for luminous intensity distribution measurements with facility for turning the light source. The LSG-1800B is an update version for LSG-1800, the...

Jueves 10 marzo 2016

Introduction: LSG-3000 Moving Detector Goniophotometer completely meets LM-79 Clause 9.3.1 requirement. The LSG-3000 is an automatic light distribution intensity 3D curve testing system for measuring light. The measuring distance is from 5m to 30m. It can measure all types of lighting sources...

Miércoles 09 marzo 2016

Impact Printer Feactures: micro dot matrix printer 1. 4.4 lines/s high printing speed,support various Language; 2. Exquisite design, easy to use; 3. Multiple interfaces optional, USB+Serial, USB+Parallel, USB+Serial+Ethernet; 4. Support black mark printing, compatible with ESC/POS; 5...

Miércoles 09 marzo 2016

80mm thermal printer wifi and bluettoth support RPP300 mobile receipt printer Features: mobile receipt printer 1. Paper sensor: LED indicator flashes when come to paper end meanwhile alarm; 2. Printing Command: ESC/POS compatible with commands set; 3. Power: 2000mAh rechargeable...

Miércoles 09 marzo 2016

Factory direct sale cheap price wireless mobile printer RPP02N bluetooth thermal printer Features: bluetooth thermal printer 1. Paper sensor: LED indicator flashes when come to paper end meanwhile alarm; 2. Printing Command: ESC/POS compatible with commands set; 3. Power: 1500mAh...

Miércoles 09 marzo 2016

4 inch printing width 150mm/s barcode labeling RP400 thermal transfer printer thermal transfer printer Exquisite appearance High speed, good stability, durable performance Transmission-typed paper detection with excellent accuracy and high speed. Multi-functional interfaces with parallel...

Miércoles 09 marzo 2016

Cantidad : 1 - Precio : USD80/UNIT

Rongta thermal dot line printing RP820 compatible with ESC/OPOS command 80mm wifi pos receipt printer Feature of pos receipt printer Elegant and functional design Black/luxury gold color optional. Color light order alarm(optional), Beeper order alarm, paper end & paper near...

Miércoles 09 marzo 2016

Cantidad : 1 - Precio : USD80/UNIT

300mm/s high speed printing 80mm pos printer RP850 rongta printer driver rp80 Feactures of windows ce thermal printer: 1. 6 inch/s high printing speed 2. Support various label printing softwares 3. Label paper automatic positioning, automatic stripping, paper detection 4. Using...

Miércoles 09 marzo 2016

Cantidad : 1 - Precio : USD120/UNIT

dot matrix printer Feactures: dot matrix printer 1: Simple & tough out-looking save space 2: High Print Speed, High Resolution plus Low noise 3: Good reliability, working life over 2 million lines 4: Easy operation & Easy use 5: Excellent copy ability. Print 1 original+6 copies...

Miércoles 09 marzo 2016

Full automatic double working hydraulic screen changer 1. single-plate double net screen changer : Equipped with two working screens, it realized very quick screen changing, enhancing producing efficiency and maintenance 2. Screen changing time is within 2 seconds. It enjoys very...

Martes 08 marzo 2016

Cantidad : 500 pcs - Precio : 0.5-2 usd per piece

muebles de forma del mango de aluminio manillar de barra T para el mercado europeo Material: aleación de aluminio 10 mm o 12 mm Diámetro de la palanca con los Centros para distintas Se suministra con tornillos Fijaciones ocultos Varios modelos y medidas Tirador de mueble bar...

Martes 08 marzo 2016

Cantidad : 500 pcs - Precio : 0.5-2 usd per piece

muebles de forma del mango de aluminio manillar de barra T para el mercado europeo Material: aleación de aluminio 10 mm o 12 mm Diámetro de la palanca con los Centros para distintas Se suministra con tornillos Fijaciones ocultos Varios modelos y medidas Tirador de mueble bar...

Martes 08 marzo 2016

Cantidad : 500 pcs - Precio : 0.5-2 usd per piece

Rectangular Gabinete Tirador Tirador del cajón 1. 12mm, 16mm o 18mm Diámetro de la palanca con los Centros para distintas 2. Se suministra con tornillos 3. Varios modelos y medidas 4. Limpiar y simple, perfecta para la puerta del gabinete de cocina, cajones, armarios o puertas...

Martes 08 marzo 2016

Main Features: JM series spinning extruder is applicable to the chip of PETP,PA6,PA66,PP etc. melting and spinning. Adopting good quality material,advanced design and processing technology makes our spinnin g extruders widely used for big project of chemical fiber successfully....

Martes 08 marzo 2016

Cantidad : 500 pcs - Precio : 0.5-2 usd per piece

Cuadrado de aluminio del gabinete de cocina de aire Rejillas de ventilación Anchura: 60 mm, 80 mm, 100 mm Longitud: 200 mm, 300 mm, 400 mm, 500 mm, 600 mm por encima de Popular en muchos países como Vietnam, Pakistán, Francia, Egipto, moriturus, etc. Uso: ventilador de aire del...

Martes 08 marzo 2016

Mechanical properties Rubber, PVS/TPR/EVA two-shaft hi-speed recyled granulator(water cooling) is normally used to produce PVC, EVA, and TPR raw material. It consists of main body, two-shaft feeder and die-face cuttng sytem ect. Put the mixed material into the feeding inlet. After...

Martes 08 marzo 2016

Single screw extruder for wire and cable sheating JM series high effective single screw extruder for wire and cable sheathing is result of our ov er twenty years research, accumulate of experience and technology advantages, Equipped with the spec ial screw it can be used in processing...

Martes 08 marzo 2016

ZLYJ series gearbox is a high accuracy and hardened tooth surface transmission device, which is designed for single screw extruder with thrust block. The design of gearbox adopt JB/T9050.1-1999. Main features: 1.The material of gear is high strength alloy steel through gear grinding...

Martes 08 marzo 2016

Apply to all kinds of agglomerate film,fragmentized film,grinding fluffy material and other raw materials that are difficult in feeding. Advantage: Available to continuously transport the raw materials.The raw mterials through the force feeder,than continuously and uniformly feed to extruder...

Martes 08 marzo 2016

- Segment screw barrel/Screw element/Segment screw and barrel - - Screw elements for counter-rotating parallel twin screw extruder Specification: Parallel twin screw diameter: Φ 18-Φ 177mm - The building block screw consists of core spindle and several hollow screw segments...

Martes 08 marzo 2016

Planetary screw barrel/ Planetary screw and barrel for plastic extrusion Specification: Diameter: Ø15-Ø500 L/D ratio: 5: 1 We can manufacture all types of screws and barrels according to clients' requirement. Base Materials: 1)38CrMoAlA(JIS SACM 645) 2)42CrMo(AISI 4140) ...

Martes 08 marzo 2016

Specification: 45/90,45/100,50/105,51/105,55/110,55/120 ,58/124,60/125,65/120,65/132,68/143,70/1 35,71/140 ,75/150,80/143,80/156,92/188,105/216 The above are our standard specification,we can customize according to customers' requirments. The compression ratio of screws can be designed...

Martes 08 marzo 2016

Bimetallic conical twin screw and barrel for plastic extrusion machines Specification: 45/90, 45/100, 50/105, 51/105, 55/110, 55/120, 58/124, 60/125, 65/120, 65/132, 68/143, 70/135, 70/140, 75/150, 80/143, 80/156, 92/188 The above are standard specifications, we can customize...