STRUCTURAL - 2398 Anuncios

Wednesday 11 June 2014

Application: XB-ZDB1L is a flashing white beacon light and can be installed in or adjacent heliports. The product do better be fixed in the elevated position and can send out white omnidirectional equally duplicated short-flashing light signal, which provides a distant visual guiding...

Wednesday 11 June 2014

Application: XB-ZSG1L is a white flashing light fixture and can be set in the approaching-direction area of the heliports. The product can send out white omnidirectional flashing light signal at night or during low visibility weather, which clearly marks out the main approaching...

Wednesday 11 June 2014

Application: XB-ZMZ1L is a inset light fixture and installed along the aiming signs evenly. The product can send out white omnidirectional steady burning light signal at night or during low visibility weather. Usually, at least six lights can provide an accurate landing position...

Wednesday 11 June 2014

Application: XB-ZFG1L is vertically installed light and can be boundary marking of touchdown and lift-off (TLOF) area. The product provides unidirectional steady-burning white light, which supplies floodlighting for helipad surfaces. As using the product, the average surface illuminance...

Wednesday 11 June 2014

Application: XB-ZHG1L is a white steady burning light fixture and can be set in the approaching-direction area of the heliports. The product can send out white omnidirectional steady burning light signal at night or during low visibility weather, which clearly marks out the main...

Wednesday 11 June 2014

Application: Meteorological target lamps can provide more accurate information and representative reference for the visually dominant visibility. Patents: - Developed product and owns independent intellectual property rights for product - Optical lens which is solely developed...

Wednesday 11 June 2014

Application: - The low-intensity LED aviation obstruction light is used as a steady-burning red light that marks all fixed obstructions to prevent air navigational hazards. - When fixed obstructions are less than 45m, a single light can be used. - When fixed obstructions are more than 45m...

Wednesday 11 June 2014

Application: - Medium intensity LED aviation obstruction light is used as flashing-burning white light that marks all fixed obstructions to prevent air navigational hazards. - When fixed obstructions are more than 45m, two or more lower intensity lights should be installed in...

Wednesday 11 June 2014

Application: - The low-intensity LED aviation obstruction light is used as a steady-burning red light that marks all fixed obstructions to prevent air navigational hazards. - When fixed obstructions are less than 45m, a single light can be used. - When fixed obstructions are more than 45m...

Wednesday 11 June 2014

Application: - The low-intensity LED aviation obstruction light is used as a steady-burning red light that marks all fixed obstructions to prevent air navigational hazards. - When fixed obstructions are less than 45m, a single light can be used. - When fixed obstructions are more than 45m...

Wednesday 11 June 2014

Application: - The low-intensity LED aviation obstruction light is used as a steady-burning red light that marks all fixed obstructions to prevent air navigational hazards. - When fixed obstructions are less than 45m, a single light can be used. - When fixed obstructions are more than 45m...

Wednesday 11 June 2014

Application: - The low-intensity LED aviation obstruction light is used as a steady-burning red light that marks all fixed obstructions to prevent air navigational hazards. - When fixed obstructions are less than 45m, a single light can be used. - When fixed obstructions are more than 45m...

Wednesday 11 June 2014

Application: - Medium intensity LED aviation obstruction light is used as flashing-burning white light that marks all fixed obstructions to prevent air navigational hazards. - When fixed obstructions are more than 45m, two or more lower intensity lights should be installed in...

Wednesday 11 June 2014

Application: - Medium intensity LED aviation obstruction light is used as flashing-burning white light that marks all fixed obstructions to prevent air navigational hazards. - When fixed obstructions are more than 45m, two or more lower intensity lights should be installed in...

Wednesday 11 June 2014

Application: - The low-intensity LED aviation obstruction light is used as a steady-burning red light that marks all fixed obstructions to prevent air navigational hazards. - When fixed obstructions are less than 45m, a single light can be used. - When fixed obstructions are more than 45m...

Wednesday 11 June 2014

Application: - The low-intensity LED aviation obstruction light is used as a steady-burning red light that marks all fixed obstructions to prevent air navigational hazards. - When fixed obstructions are less than 45m, a single light can be used. - When fixed obstructions are...

Sunday 01 June 2014

Cantidad : min 1 - Precio : USD70000

aac block machine (1)light weight Areated concrete density is usually 400-700kg/m3,(according the market in produce ),same as 1/3 of clay brick and 1/5 common concrete.So use the Light brick can reduce the weight of the build more,and also reduce the beam of roof and pillar press best...

Sunday 01 June 2014

Cantidad : min 1 - Precio : USD70000

aac machinery (1)light weight Areated concrete density is usually 400-700kg/m3,(according the market in produce ),same as 1/3 of clay brick and 1/5 common concrete.So use the Light brick can reduce the weight of the build more,and also reduce the beam of roof and pillar press best...

Sunday 01 June 2014

Cantidad : min 1 - Precio : USD70000

aac block plant cost (1)light weight Areated concrete density is usually 400-700kg/m3,(according the market in produce ),same as 1/3 of clay brick and 1/5 common concrete.So use the Light brick can reduce the weight of the build more,and also reduce the beam of roof and pillar press best...

Wednesday 21 May 2014

Chemical composition (%) of 14NICR10 alloy structural steel C, 0.10-0.17 Si, 0.17-0.37 Mn, 0.3-0.6 Cr, 0.6-0.9 Ni, 1.5-1.9 Material: Hot rolled steel round bar The size of 14NICR10 alloy structural steel Diameter: 80mm-1200mm Length: steel round bar: 2000mm-12000mm Straightness: 3mm/M max...

Wednesday 21 May 2014

The use of Q235C Carbon steel plate Mainly used for the production of various types of steel rivet, steel bolt, steel weld and other structural components. Chemical composition of Q235 C Carbon steel plate C(％), ≤0.18 Si(％), ≤0.30 Mn(％), 0.35～0.80 P(％), 0.040 S(％), 0.040 Cr(％), ≤0...

Friday 16 May 2014

Cantidad : 24000kg - Precio : Fob shenzhen 6.8usd/

silicon rubber Mould Making and Casting company Specifications The advantages: 1,easy-operation 2,Light viscosity 3,Low shrinkage,age resistance 4,No deformation and Favorable tension Introduction of high temp silicone rubber for making soap molds: 1 structural silicone compound...

Wednesday 16 April 2014

aac machine 1)light weight Areated concrete density is usually 400-700kg/m3,(according the market in produce ),same as 1/3 of clay brick and 1/5 common concrete.So use the Light brick can reduce the weight of the build more,and also reduce the beam of roof and pillar press best...

Sunday 13 April 2014

Cantidad : 200000 set - Precio : 10-1000 USD/SET

1.Introduction： http://www.electric-block.com/products-f/27.html 　　Five features on structural design and usability 　　1. Safe and reliable in operation with minimum maintenance 　　2. High efficiency in mechanism, labor saving 　　3. Light in weight and carry easily 　　4. Attractive appearance...

Friday 21 March 2014

Cantidad : 1 - Precio : 43000 USD

- SD-YAG3015 metal laser equipment machinery for plate//steel/tubes cutting - laser equipment | metal laser cutting | cutting equipment YAG Metal Laser Cutting Machine Cutting Demo Video Youtube: http://youtu.be/jgCFmr1RUQ0 SD-YAG3015 CNC laser cutting machine suitable for...

Friday 21 March 2014

Cantidad : 1 - Precio : 38000 USD

- SD-YAG2513 min cutting kerf 0.15mm laser cutting carbon steel equipment - laser cutting carbon steel | cutting metal | laser equipment YAG Metal Laser Cutting Machine Cutting Demo Video Youtube: http://youtu.be/jgCFmr1RUQ0 SD-YAG2513 CNC laser cutting machine suitable for...

Thursday 20 March 2014

Cantidad : min 1 - Precio : USD20000

1. The brick machine(www.chinablockmachine.com) is equipped with the touch-screen computer. The Japanese Mitsubishi PLC control system allows the full automation and intellectualization of the production process, including blending, material feeding, and compression molding. Each...

Friday 14 March 2014

Cantidad : customized

Brief introduction of ball tube mill : Ball mill is mainly used to grind materials in mineral, cement, refractory, chemical industry, etc. Ball mill has dry and wet types. When wet ball mill works, certain water and other liquid will be added into materials to increase the flow ability...

Tuesday 11 March 2014

Cantidad : 20 ton - Precio : 1-100 USD

Jracking Cantilever rack provides an excellent solution to store irregular or long items, such as furniture, tubing, lumber, etc. This is achieved by eliminating obstructions in the front of the rack and providing a clear opening of the rack in length as long as desired. Tower spacing...

Thursday 20 February 2014

Cantidad : order - Precio : order

carbon fiber telescopic pole,window cleaning pole from china. 1) carbon fiber telescopic pole manufacturing technology ?roll-wrapping technique is used to make carbon fiber telescopic pole that we supply. It is a moulding process which means the material is laid up around a mandrel...