OUTPUT - 11375 Anuncios

Domingo 29 enero 2023

LFD Planetary Reduction Drive Specification of LFD Planetary Reduction Drive Rated Parameter Table of LFD Planetary Reducer Gearbox series Nominal output torque(Nm) 25-2550 Reduction ratio 3-100 Backlash(arcmin) 3-5 Max.working temperature(℃) 90 Noise(dB) 60-77 LFD Tapered...

Domingo 29 enero 2023

Specification of LFB Concentric Shaft Planetary Gearbox Reducer Rated parametertable of LFB series Concentric Shaft Industrial Planetary Gearbox Nominal output torque(Nm) 14-1900 Reduction ratio 3-100 Backlash(arcmin) 3-5 Max.working temperature(℃) 90 Noise(dB) 63-77 ...

Domingo 29 enero 2023

Laifual Harmonic drive (strain wave gear, harmonic gearbox, harmonic gear drive reducer) mainly consists of three parts. Which are wave generator, flex spline, cicular spline. Our harmonic drive has the characteristics of zero-backlash, low-temperature rise, low starting torque, high reliability...

Domingo 29 enero 2023

HARMONIC GEARBOX SOLUTION EXPERT Naming Rules How does a Harmonic Drive Work? The rotation movement comes from the input shaft, which can be a servo motor shaft. This is connected to an element called "harmonic wave generator", which has an elliptical shape and is surrounded by an...

Domingo 29 enero 2023

Plate extruder is one of the screw plastic extruders. The working mechanism of screw plastic extruder is to rely on the pressure and shear force generated by screw rotation, so that the materials can be fully plasticized and evenly mixed, and formed through die; Therefore, sometimes...

Domingo 29 enero 2023

This plastic profile extrusion line consists of Single Screw Extruder, Vacuum Calibration Table, Haul-off Unit, Cutter and Stacker, the producing line features of good plasticization, high output capacity, low power consumption, and etc. The main plastic profile extruder speed controlled...

Domingo 29 enero 2023

JWELL Machinery is designed and developed in a new idea, pipe and profile extrusion line produces PP pipe series, PVC pipeline series, ABS pipeline series, composite pipe series, etc., plastic pipe extrusion machine is high-yield, low energy consumption, good melt homogeneity, and...

Domingo 29 enero 2023

Due to the increasingly stringent requirements of the market for products, Jwell has developed advanced five-layer symmetric and seven-layer asymmetric distribution technology, which makes the products produced by the equipment obtain better barrier performance. In addition, the multi-machine...

Domingo 29 enero 2023

HDPE extrusion machine production line adopts the most advanced technology of Europe, It is a new research achievement of energy-saving production line, which is suitable for high-speed extrusion of HDPE, PP, and other polyolefin pipe. compared with cornmon production line, the HDPE...

Sábado 21 enero 2023

Cantidad : 300sets/mo - Precio : 7800-200000USD

Features of Air Flash Dryer(Cassava Drying Machine) The starch factory at present normally adopt airflow drying (also called flash drying), the whole process time is completed in an instant, so the internal moisture of the starch granules have been dry before gelatinization, the pasting...

Sábado 21 enero 2023

Precio : $30000~300000/set

Overview of SK53 Twin Screw Extruder SK53 small twin screw extruder is a mini extruder machine that can be used in engineering plastics, color masterbatch, functional masterbatch, blending modification, and other industries. In order to adapt to the high temperature and high wear...

Sábado 21 enero 2023

Precio : $30000~300000/set

With more than 20 years of industry experience and installation practice of more than 8000 production lines, Nanjing KY Chemical Machinery Co., Ltd. provides global customers with optimal cost performance and reliable compouding extrusion systems. Our twin screw extrusion machine...

Viernes 20 enero 2023

Cantidad : 10-1000 pc - Precio : USD9,000 - USD 18,00

GH-SW1280 InGaAs area image sensors are two-dimensional image sensors. The ingaas sensor has a hybrid structure consisting of a CMOS readout circuit (ROIC: readout integrated circuit) and back-illuminated InGaAs photodiodes for short wavelength infrared (SWIR, 900-1700) and extended...

Viernes 20 enero 2023

As a kind of mold steel used for plastic production, plastic mold steel is main material of plastic mold. The plastic mould steel has enhanced the development of industrial products to be advanced, diversified, individualized, and high value-added. All countries in the world count...

Viernes 20 enero 2023

Cantidad : $1000-2000 - Precio : 500 Sets/Month

XC2000 is an inline smt reel x ray counter. It uses the X-Ray perspective principle and the independently developed algorithm software with AI function, which can quickly and accurately calculate the number of materials in the reel, it can also upload MES data and automatically print...

Viernes 20 enero 2023

Cantidad : $1000-2000 - Precio : 500 Sets/Month

XC2000 is an inline automatic counting machine. It uses the X-Ray perspective principle and the independently developed algorithm software with AI function, which can quickly and accurately calculate the number of materials in the reel, it can also upload MES data and automatically...

Viernes 20 enero 2023

Cantidad : $1000-2000 - Precio : 500 Sets/Month

XC1100 is a micro-focus X-ray full-automatic counting machine. It uses X-Ray perspective principle and independently developed algorithm software with AI function, which can quickly and accurately calculate the number of materials in the material reel. This X-Ray chip counter also...

Viernes 20 enero 2023

Cantidad : $1000-2000 - Precio : 500 Sets/Month

XB8200 is mainly used for automatic online detection of positive and negative alignment during the production of square polymer soft pack batteries. The battery X-Ray inspection system is based on the fully automatic optical detection developed on the basis of an image detection technology...

Viernes 20 enero 2023

Cantidad : $1000-2000 - Precio : 500 Sets/Month

X6600/X6600B is a cost-effective general-purpose offline precision microfocus X-Ray inspection equipment. It is suitable for the inspection of various factory offline products. This AXI inspection machine has the characteristics of high magnification, multi-angle inspection, and a...

Viernes 20 enero 2023

Precio : 400-3600 USD

TP400 cable probe system mainly used in various specifications of CNC grinding machines, CNC lathes, and especially measuring devices. TP 400 CNC digitizing cable probe system includes a TP400 trigger probe unit, two four-core, oil-proof shielded cables,s and standard measuring software...

Viernes 20 enero 2023

Precio : 400-3600 USD

OPS-30 optical transmission probe system with special cnc probe programming contains xyz probe cnc-OP510 optical infrared probe, OSI-20 receiver and standard measuring software. The OP510 CNC xyz touch probe is a compact homemade cnc 3d touch probe with optical signal transmission...

Viernes 20 enero 2023

Cantidad : 200,000 pc - Precio : USD 150- 600

Wine Separation and Extraction System Ideal Choice for wineries And Product Overview JS-WSU-M2 serie products are specially designed to meet the brewing needs of wineries. This wine extraction system is different from the traditional pot distillation and extraction method. By using...

Viernes 20 enero 2023

KE600B series high-performance spindle servo drive built-in position loop and servo positioning function. When used in the machine, it can realize closed-loop control of the spindle motor which has the encoder with the fast response and smooth speed feature. KE600B could be widely...

Viernes 20 enero 2023

KE600A series is a closed loop vfd developed on the basic of KE300, with more powerful functions, fit for more complex applications. Integrated with close loop vector control, sensorless vector control, V/f control, torque control and soft start functions, KE600 closed loop vector...

Viernes 20 enero 2023

KE300X mini vfd are designed for common applications of small power OEM market, with various functions of PID, multistage speed, DC braking, Modbus communication and others. Its smaller size can further reduce the installation space (the size is about 15% smaller than similar products)...

Jueves 19 enero 2023

Making a precast concrete magnet includes a lot of fastening work: fastening formwork on mold table, fixing wire boxes at designated spots etc. The traditional practice would be drilling holes and then inserting pins for fastening. To be more exact: drilling holes both on formworks...

Jueves 19 enero 2023

Lanso types of different pressure transmitter feature compact structure and high accuracy, and can output standard signals, suitable for remote monitoring. Lanso, as one of a expertized company, keeps improving our pressure transmitter/transducer/sensor products to meet your special...

Jueves 19 enero 2023

Polarization Beam Splitter/Combiner, or PBS polarization beam splitter, is a fiber assembly built on polarization-maintaining or regular fiber. It is normally used for coupling two beams of ortho-polarized light into one fiber or coupling a single output containing ortho-linearly...

Jueves 19 enero 2023

Designed and produced by MEI SU, this mini PM fiber coupler can split the input power stably in the splitting ratio of 5: 95. And similar to the other PM coupler produced by MEISU, Mini PM Coupler (5: 95) can also maintain the beam polarization during the use. Moreover, designed with...

Jueves 19 enero 2023

This kind of micro mechanical optic switch is driven by a relay to control the prism to turn, thus switch the path, with only few channels such as １ｘ１,１ｘ2, and２ｘ２. It is normally used for OLP (Optical Fiber Line Protection) system. This mini switch can be seen as an updated version...