125UM - 45 Anuncios

Friday 12 April 2024

Cantidad : 10000+ - Precio : $5-9999

Gearlink's GCS7L0C54 SFP transceiver is compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The china optical transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1490nm DFB laser (the 1550nm DFB laser)...

Monday 19 February 2024

Gearlink's SFP-GE-BX SFP transceiver is compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The 1310nm 1490nm sfp transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1310nm FP laser(the 1490nm DFB laser)...

Thursday 30 November 2023

GLQ5L0C31 is designed to operate over single-mode fiber system using 4X10 CWDM channel in 1310 band and links up to 30km. The module converts 4 inputs channel of 10Gb/s electrical data to 4 CWDM optical signals, and multiplexes them into a single channel for 40Gb/s optical transmission...

Friday 14 July 2023

Like MTP®/MPO cable, MTP®/MPO Shuffle cable is also used for connecting MTP® modules together as a permanent link, and it also be used with plug-and-play modules or MTP®/MPO connector panels to achieve multi-level connection of the extension of the pre-terminated trunk cable by MTP®/MPO panel...

Friday 14 July 2023

T & S MTP® / MPO fiber loop is a device used for parallel connection tests and an aging test of optical communication equipment. Well-designed by engineers at T&S, our MTP®/MPO loopback adapter can transmit the optical network signal from the transmitter to the receiver, thereby...

Friday 14 July 2023

MPO/MTP® Hydra cable assemblies is deployed inside plug and play cassette modules. It is used for multi-fiber to single-fiber splitting out interconnects. This solution is a 12-colored 0.9mm cable utilizing an MPO/MTP® connector on one end and generic connectors (such as LC, SC, FC, etc...)

Wednesday 28 June 2023

25g sfp28 transceiver has a transmission rate of 25Gbps, which is mainly used for the interconnection of data center servers and switches. The best input/output (I/O) performance and fiber capacity are 2.5 times than 10G Ethernet, and the port has higher density, which can effectively...

Tuesday 30 May 2023

Fiber Patch Cord or jumper is a fiber cable that has fiber connectors terminated on one or both ends. General use of these cable assemblies includes the interconnection of fiber cable systems and optics-to-electronic equipment. - a quality fiber optic patch cord factory, T&S...

Tuesday 30 May 2023

Fiber Patch Cord or jumper is a fiber cable that has fiber connectors terminated on one or both ends. General use of these cable assemblies includes the interconnection of fiber cable systems and optics-to-electronic equipment. - a quality fiber optic patch cord manufacturer, T...

Saturday 04 March 2023

GHS7L0C54 is a hot-pluggable 3.3V small-form-factor transceiver module. It is designed expressly for high-speed communication applications that require rates up to 10.7 Gb/s, it is designed to be compliant with SFF-8472 SFP+ MSA. The module data link up to 80km in 9/125um single-mode fiber...

Thursday 20 October 2022

Fiber Optic ADSS Cable is known as an all-dielectric self-supporting optical cable. Self-supporting ensures that the ADSS outdoor fiber cable has sufficient mechanical strength. The ADSS fiber cable applies all-dielectric material to withstand the impact of strong electricity in a...

Friday 09 September 2022

T & S MTP / MPO fiber loop is a device used for parallel connection tests and an aging test of optical communication equipment. Well-designed by engineers at T&S, our MTP/MPO loopback adapter can transmit the optical network signal from the transmitter to the receiver, thereby...

Saturday 03 September 2022

Gearlink's GCS9L0C45 SFP china transceiver is compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1490nm DFB laser (the 1550nm DFB laser)...

Saturday 03 September 2022

Gearlink's SFP-GE-BX40 SFP transceiver is compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1310nm FP laser (the 1490nm DFB laser), and the PIN/TIA...

Saturday 03 September 2022

Gearlink's GCS5L0C35 SFP transceiver is compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1310nm FP laser (the 1550nm DFB laser), and the PIN/TIA...

Saturday 03 September 2022

Gearlink's SFP-GE-BX SFP transceiver is compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA). The transceiver consists of five sections: the LD driver, the limiting amplifier, the digital diagnostic monitor, the 1310nm FP laser (the 1550nm FP laser), and the PIN/TIA...

Thursday 24 February 2022

Precio : 10-30USD

TLM-CFS-2 Fiber Stripper features a 1-mm diameter hole at the tip of the 250-µm Fiber Optic Buffer Stripper ideal for stripping fiber jacket. The 140-µm diameter hole and V-opening in the blades allows removal of 250-µm buffer coating from 125-µm fiber. By using the fiber cable stripping tool...

Thursday 24 February 2022

Precio : 10-30USD

Fiber optic stripper is used to peel 250um coating of 125um fiber optic, 1.98mm open pore at the top uses to peel protective covering of fiber optic pigtail. After manufacturers preset all of sizes, you do not need to adjust. All of cutting ends have precise mechanical tolerance to...

Wednesday 22 December 2021

As a fiber optic products supplier in the industry, TUOLIMA focuses on brand customization, multi-selective product logo printing, high-end and independent packaging design, to provide customers with a one-stop service that is quite trusted by professionals worldwide. Here are the...

Tuesday 19 October 2021

Fiber Optic ADSS Cable is known as all dielectric self-supporting optical cable. Self-supporting ensures that the adss fiber optic cable has sufficient mechanical strength. The adss fiber cable applies all dielectric material to withstand the impact of strong electricity in a high...

Saturday 29 August 2020

Precio : <$200

Description 10 / 100Mbps single-mode single-fiber media converter is an Ethernet optoelectronic signal conversion device between 10 / 100M UTP interface (TX) and 100M fiber interface (FX). The traditional 10 / 100M media converter can be extended to 120 kilometers via a single fiber link...

Wednesday 17 January 2018

Cantidad : 1 - Precio : USD25

Interruptor óptico de fibra óptica de 1x2 nuevo estilo Conmutador óptico 2X2 2X2B D1X2 D2X2B Interruptor óptico MEMS Mini conmutador óptico Interruptores ópticos mecánicos Interruptor óptico SM MM Interruptor magneto-óptico Interruptor óptico de estado sólido Características del nuevo...

Wednesday 17 January 2018

Cantidad : 1 - Precio : USD25

Interruptor óptico D1 × 2 Caracteristicas  Pérdida de inserción baja  Amplitud de onda amplia  Baja diafonía  Alta estabilidad, alta confiabilidad  Sin epoxy en el camino óptico  Enganche y sin bloqueo Solicitud  Red de área metropolitana  I + D en laboratorio  Monitoreo...

Wednesday 17 January 2018

Cantidad : 1 piece - Precio : 99USD/pcs

Interruptor óptico D2 × 2B Caracteristicas  Pérdida de inserción baja  Amplitud de onda amplia  Baja diafonía  Alta estabilidad, alta confiabilidad  Sin epoxy en el camino óptico  Enganche y sin bloqueo Solicitud  Red de área metropolitana  I + D en laboratorio  Monitoreo...

Thursday 26 January 2017

Cantidad : 1 - Precio : USD25

2X2B Fiber Optical Switch 2X2 1X2 D1X2 D2X2B optical switch MEMS optical switch Mini Optical Switch Mechanical Optical Switches SM MM optical switch Magneto-Optical Switch Solid State Optic Switch Features of 2X2B Fiber Optical Switch: Low Insertion Loss Wide Wavelength...

Friday 18 November 2016

Features 1x2 Magneto-Optical Switch single mode Low Insertion Loss Wide Wavelength Range Low Crosstalk High Stability, High Reliability Epoxy-free on Optical Path Latching and Non-latching Application Metropolitan Area Network R&D in Laboratory System Monitoring Configurable...

Tuesday 18 October 2016

Features Low Insertion Loss Wide Wavelength Range Low Crosstalk High Stability, High Reliability Epoxy-free on Optical Path Latching and Non-latching Application Metropolitan Area Network R&D in Laboratory System Monitoring Configurable OADM Parameters OSW-1×2 ...

Sunday 25 September 2016

Cantidad : 1 pc - Precio : against the qty

Descripción: Suministros de calidad superior de latiguillos de fibra óptica con precios muy competitivos, cada pieza de cable de conexión se prueba en el taller antes de la entrega al cliente. Será recibido del cliente / necesidades especiales. ensamblajes de cable de fibra son...

Monday 29 August 2016

Precio : 10,00 €

16G SFP+ LW16G Fibre Channel SFP+ TransceiverProduct Features● Up to 14.025Gb/s bi-directional data links ● Electrical interface specifications per SFF-8431 ● Management interface specifications per SFF-8432 and SFF-8472 ● SFP+ MSA package with duplex LC connector ● Build-in Dual CDR at 14...

Tuesday 26 July 2016

The TC-90 field fiber cleavers is best used for quick termination connectors and optimal for mechanical Splicing. Each cleaver provides a guide for variable cleave lengths from 5 to 20mm. The ceramic blades will Perform over 6000 cleaves before replacement is necessary. The score...