PIGTAILS - 168 Anuncios

Jueves 16 mayo 2024

Cantidad : 1000

A&S provides all kinds of Onan Generator Parts such as Onan Generator Parts 155-2325 Exhaust Tube Kit Onan Generator Parts 155-2424 7" Straight Down Exhaust Onan Generator Parts 155-2610 3" Straight Down Exhaust Onan Generator Parts 155-2845 Tail Pipe Kit Onan Generator...

Jueves 16 mayo 2024

LeoMed, a professional endoscopy accessories manufacturer, established by returnee in 2011, dedicated to developing and producing cost-effective, high-quality products in Gastroenterology, Pulmonology and Peripheral Vascular. Single-use Biliary Drainage Catheter Used for endoscopic...

Jueves 09 mayo 2024

Pigtail stents Double J ureteral stent also named pigtail stent made from medcial grade TPU ( imported) X-ray opaque line go across the double J ureteral stent</ p> Used for kidney stones and ureteral stones Double / Single loop available Sizes as below available Item N...

Sábado 30 marzo 2024

Cantidad : 20000 - Precio : 1-100USD

A fiber patch cord 10 meter is also known as a fibre optic connector, it is a fibre optic cable equipped with connectors at both ends. If a cable has only one connector, it is called a pigtail. Fibre optic patch cord usually has a thick protective layer, it is usually used to connect...

Martes 05 marzo 2024

Locking Pigtail Catheter It is used for nephrostomy, abscess, and other multipurpose drainage. Parameter of Locking Drainage Catheters Product No. Size(Fr) Length(cm) Product No. Size(Fr) Length(cm) 45.02.50001 5 25 45.02.50009 10.2 60 45.02.50002 6 40 45.02.50010 12 40 45...

Martes 06 febrero 2024

MICRO CRIMP CONNECTORS These Micro-D Crimp contact type connectors feature gold-plated Becu Twist Pin contacts for best performance, the sectional area of cable: 0.1mm2~0.15mm2, 0.07mm2. Micro Crimp Style Electrical Connectors for Choice Sunkye R04A Mil Spec Crimp Style Connector...

Viernes 12 enero 2024

Double Pigtail Details of Double Pigtail This product is indicated for biliary drainage. For more information about biliary drainage catheter, please feel free to contact us! Micro tech nanjing, as an excellent gastroenterology products supplier, offers a wide range of endoscopy device...

Sábado 06 enero 2024

UnitekFiber Waterproof Pre-terminated Fiber Optical pigtail is to connect the optical node to the backbone fiber in CATV system. Its design fits Aerial, Base station, and Vault applications.The cable is with a rotational nut to avoid cables twists and enables a quick and easy installation...

Sábado 06 enero 2024

Tight-buffered 0.9mm gjfjv optical fiber cable is consist of a colored bare fiber and extruded with PVC or LSZH sheath around the bare fiber with vacuum-pumping technology. There are 12 colors for 0.9mm tight buffered fiber cable.This cable is mainly used for termination assembling...

Sábado 06 enero 2024

UnitekFiber provides standard LGX metal type and ABS type box of PLC splitter. The fiber optic splitter box adopts modular design and has two to four (eight) expansion slots. The slot is used to insert optical PLC splitter. The storage of fiber pigtail is fixed by adapter. The LGX...

Sábado 06 enero 2024

UnitekFiber manufacturing 2U slid out ODF box is a 19 inch tandard structure. There are 2pcs of stainless steel rails at the sides of the box. The fiber box can be loaded with FC,SC,ST,LC adapters and pigtails. This optical panel is usually mounted in the fiber optical cabinet to...

Viernes 29 diciembre 2023

Fiber cable adapter is a component used to realize optical signal splitting/combining, or used to extend optical fiber links, belonging to optical passive components. In the field of telecommunication network, cable television network, user loop system, local area network will be applied...

Jueves 26 octubre 2023

Used for fiber butt splicing fiber or fiber splicing pigtail, this is equivalent to making a splice, and the thing used for this kind of cold splicing is called an optical fiber cold splice. Two technologies can be used for the termination of the optical cable: fusion splicing and cold splicing...

Miércoles 27 septiembre 2023

Cantidad : 10000 - Precio : 1~10

Fiber optic cable patch panel is an optical fiber distribution equipment specially designed for optical fiber communication equipment room, which has the functions of optical cable fixing, protection and termination, and can realize optical cable protection and wire adjustment functions...

Miércoles 27 septiembre 2023

Cantidad : 10000 - Precio : 1~10

Fiber optic pigtail is a fiber optic cable with a connector that is terminated at the factory and not terminated at the other end. Functions of Fiber Optical Pigtail 1. Optical fiber pigtails are used for splicing corridor optical cables and user optical cables, so as to realize the...

Miércoles 06 septiembre 2023

Multicore Fiber Fanout, or the so-called MCF Fiber, is a special optical fiber with multiple cores in one cladding. At present, the application of multicore fiber is gradually becoming more and more widespread. It is normally used to connect with the traditional single-core fiber system...

Martes 29 agosto 2023

Fiber optic adapters are also called Fiber Couplers and Fiber mating sleeves are one of the most commonly used and very necessary product used in the fiber optic network. Our range of high quality LC APC adapter has high precision alignment sleeves for good reliability and reconnectability...

Martes 29 agosto 2023

Fiber optics, or optical fibers, are long, thin strands of carefully drawn glass about the diameter of a human hair. These strands are arranged in bundles called optical cables. We rely on them to transmit light signals over long distances. Contact UnitekFiber, a professional fiber...

Martes 29 agosto 2023

optical double adapter is used to provide a cable to cable or cable to equipment fiber optic connection. UnitekFiber supplies a wide range of fiber mating sleeves, hybrid adapters, and special female to male hybrid optic adapter. All our fiber adapters are in Low insertional loss...

Martes 29 agosto 2023

The FTTH-022 is a floor-mounted or wall-mounted cable terminal box for end-user, indoor use, capable to handle fiber fusion, capable to handle fiber fusion, fiber cable, and pigtails. Specifications of FTTH-022 Optical Fiber Panel Parameter Value Remark Model FTTH-022 Outside...

Martes 29 agosto 2023

Optical fiber panel adapter socket without jumping fiber insertion should be a dustproof device. There is a plate and convex platform at the bottom of the box to facilitate the storage of optical cable or redundant optical cable. The design of the optical path can meet the requirements...

Martes 29 agosto 2023

Support termination, splicing, and storage for fiber optic cable systems. Suitable for two adapters SC or two adapters LC configuration. Compatible with G.657A1. Compact structure and perfect fiber management. Engineered fiber routing protects the bend radius through the unit to ensure...

Martes 29 agosto 2023

Support termination, splicing, and storage for fiber optic cable systems. Compact structure and perfect fiber management. Engineered fiber routing protects the bend radius through the unit to ensure signal integrity. Applicable for desk-mount or wall-mounted and compatible with flush-mount...

Viernes 28 julio 2023

The drop cable pigtail is a fiber optic cable terminated with a factory installed connector at one end, leaving the other end terminated. Therefore, the connector side can be connected to the equipment and the other side can be fused with fiber optic cables. Fiber optic patch cords...

Viernes 30 junio 2023

The FTTH drop cable pre terminated fiber patch panel is to terminate fiber connectors at both ends of the ready-made drop cable, which can have various interfaces such as LC and SC. At present, SC,LC interfaces are the majority in the market, and other FC and ST are also produced...

Martes 30 mayo 2023

Waterproof tail cable used to connect the backbone cable lines and optical receivers. Using high-quality connector parts, with high-quality waterproof cables and corrosion-resistant high-quality anti-component. This kind of fiber pigtail assembly is mainly used for the access of field...

Martes 30 mayo 2023

Fiber to the home (FTTH) is the ultimate development goal of broadband access, and the TLMOR21039D mini optical receiver is the end product to meet this goal. This fiber receiver adopts low-power light-receiving technology to meet the needs of FTTH fiber-to-the-home CATV reception...

Martes 30 mayo 2023

Except traditional connector assembly like LC, SC, MU, FC, ST, E2000, etc., we keep in cooperation with top suppliers for new connector assembly technology enhancement, for example, CS, SN, MDC connector for new applications. Standard Fiber Optic Cable Patch Cord Fiber Patch Cord...

Martes 30 mayo 2023

Fiber Patch Cord or jumper is a fiber cable that has fiber connectors terminated on one or both ends. General use of these cable assemblies includes the interconnection of fiber cable systems and optics-to-electronic equipment. - a quality fiber optic patch cord factory, T&S...

Martes 30 mayo 2023

Fiber Patch Cord or jumper is a fiber cable that has fiber connectors terminated on one or both ends. General use of these cable assemblies includes the interconnection of fiber cable systems and optics-to-electronic equipment. - a quality fiber optic patch cord manufacturer, T...

Martes 18 abril 2023

Used for fiber butt splicing fiber or fiber splicing pigtail, this is equivalent to making a splice, and the thing used for this kind of cold splicing is called an optical fiber cold splice. Two technologies can be used for the termination of the optical cable: fusion splicing and cold splicing...

Sábado 15 abril 2023

Model TFX-05 is a box that splits an optical cable into a single optical fiber. It is installed on the wall for user termination. Its function is to provide optical fiber fusion and pigtail fusion. This optical fiber cable distribution box also provides mechanical protection and...

Miércoles 12 abril 2023

Cantidad : 10000 - Precio : 1~10

Plastic Fiber Distribution Box is especially used to protect the connection of pigtails and optic cables in the network Why Choose WELINK Plastic Fiber Distribution Box WELINK has 8 years of experience in the design, production and assembly of optical fiber distribution boxes WELINK...

Miércoles 12 abril 2023

Cantidad : 1~10 - Precio : 10 000,00 €

MTP/MPO Patch Panels means the patch panel equipped with MTP/MPO adpaters and pigtails which is for high density application Importances of MTP/MPO Patch Panels Space is very expensive in today's data centers, making it more important than ever to increase network cabling density...

Martes 11 abril 2023

FTTH 8 ports Wall Mount Fiber Enclosure is applicable to indoor/outdoor fiber cable straight through or branch connetions. It is used for cabling distribution and end connection of the optical fiber system. The Fiber Enclosure is applied for wall mounted with SC, LC, FC, ST ports...

Martes 11 abril 2023

This Fiber Optical patch panel is a 19-inch standard type. This Patch panel can be equipped with MPO module box and splicing fiber methods, which are applied to high-density network solutions and splice fiber-distribution network solutions. The Maximum fiber ports with MPO/MTP cassette...

Viernes 07 abril 2023

Details of Double Pigtail This product is indicated for biliary drainage. SPECIFICATION Biliary Drainage Catheter Double Pigtail REF Stent Shape Stent Diameter (Fr) Stent Working Length (cm) Packaging BPDS-31993-0705 Distal Pigtail 7 5 2/Box BPDS-31993-0706 Distal Pigtail...

Sábado 18 marzo 2023

Fiber optic pressure sensor PT-01 is used for accurate measurement of fluid pressure such as liquid and gas, it is based on an industrial-grade design and uses a unique pressure elastic element as a sensing substrate, the sensor has built-in temperature compensation FBG, so as to...

Sábado 18 marzo 2023

Surface mounted optical strain gauge MS-02 is mainly used to monitor the stress and deformation of various structural surfaces. The sensor is packaged with high-performance stainless steel material, and is installed on the surface of the monitored object by gluing or spot welding...

Sábado 18 marzo 2023

Surface mounted FBG strain sensor MS-01/MST-01 can meet the strain measurement needs of various occasions, and can be installed in different monitoring positions such as concrete surfaces or steel surfaces. Mainly used to measure the strain of steel structures and concrete surfaces...

Sábado 18 marzo 2023

Fiber optic pressure transducer PT-01 is used for accurate measurement of fluid pressure such as liquid and gas, it is based on an industrial-grade design and uses a unique pressure elastic element as a sensing substrate, the sensor has built-in temperature compensation FBG, so as...

Sábado 25 febrero 2023

With the rapid development of optical communication technology, optical transceiver have gradually evolved from the larger GBIC modules to SFP + optical transceiver modules that support 10G rates, QSFP + optical transceiver modules that support 40G rates, and CFP optical modules and...

Sábado 25 febrero 2023

Fiber optic reflector is an optical passive device that allows only certain bands to pass through, using FBG fiber gratings or filters to reflect specific reflection wavelengths back, while normally passing through other communication bands that are not within the specific reflection...

Miércoles 22 febrero 2023

The Difference Between Fiber Patch Cord and Fiber Pigtail Fiber pigtails patch cords are cables directly connected to desktop computers or devices to facilitate device connection and management. Patch cords have a thicker protective layer and are often used between terminal boxes...

Sábado 18 febrero 2023

Cantidad : 25000 piec - Precio : 5 - 150USD

Used for temporary endoscopic drainage of the biliary duct through the nasal passage by use of an indwelling catheter. Features of Single-use external biliary drainage catheter - The drainage catheter provides the perfect combination of flexibility and stiffness. - The drainage...

Jueves 19 enero 2023

Multicore Fiber Fanout, or the so-called MCF Fiber, is a special optical fiber with multiple cores in one cladding. At present, the application of multi-core optical fiber is gradually becoming more and more widespread. It is normally used to connect with the traditional single-core fiber system...

Jueves 19 enero 2023

Basic Data of 24 Port FO Patch Panel 19 FO Patch panel SC Type 24Port 19" 1U Rack Mounted Grey color Product No.: CL-FPR1-24 Delivery Time: 15-20 days MOQ（Neutral): 100 Pieces Package: Neutral or OEM Packing box Payment Term: Western Union, Paypal, T/T Dimension ( L×W×H ) of FO Patch...

Jueves 12 enero 2023

The same between the Tilted FBG (TFBG) and the standard FBG is that the core refractive index modulation is uniform, the difference is that the TFBG will have multiple mode couplings due to the tilt angle between the tilted fiber bragg grating and the axial direction, mainly including...

Jueves 12 enero 2023

Phase Shifted FBG is to introduce phase discontinuity points in the FBG, and generate a very narrow transmission window in the reflection spectrum of the FBG, the transmission wavelength varies with the phase shift amount. Phase Shifted FBG can be used as a demultiplexer in dense...

Jueves 12 enero 2023

Fiber bragg grating reflector is a wavelength selective filter, which is usually installed at the front end of the ONU of the optical network to achieve accurate and fast detection of the end-to-end attenuation of the optical link. Types of FBG Reflector FBG Reflector (1550nm) Fiber...

Jueves 12 enero 2023

Long period fiber bragg grating (LPFG) is formed by the periodic refractive index modulation in the fiber axis, and its period is generally larger than 100µm. Its coupling mechanism is: the fundamental mode of the fiber core transmitted forward is coupled into the cladding mode...

Martes 10 enero 2023

Fiber optic cable patch panel is an optical fiber distribution equipment specially designed for optical fiber communication equipment room, which has the functions of optical cable fixing, protection and termination, and can realize optical cable protection and wire adjustment functions...

Martes 10 enero 2023

Fiber Optic Pigtail is a fiber optic cable with a connector that is terminated at the factory and not terminated at the other end. Functions of Fiber Optic Pigtail 1. Optical pigtail are used for splicing corridor optical cables and user optical cables, so as to realize the connection...

Sábado 17 diciembre 2022

A fiber optic adapter, sometimes also called a coupler, is a small device designed to terminate or link the fiber optic cable or fiber optic connectors between two fiber-optic lines. By linking two connectors precisely, fiber optic adapters allow the light sources to be transmitted...

Jueves 15 diciembre 2022

Precio : USD100-USD20000

Flexible scopes consist of the flexible endoscope insertion tube, bending section, light guide tube, water/suction valve, stress boot, knob, light guide beam connector, light guide fiber, bendable image beam, and other important accessories. The structure of flexible endoscope seems simple...

Martes 13 diciembre 2022

Duplex 2.0/3.0mm fiber optical cable is a zip cord fiber optic cable paralleled two 0.9mm simplex cables which is wrapped with steel tape. This cable is mainly used for termination assembling. Description of Duplex Zipcord Tight Buffered Armored Fiber Optic Cable GJSFJV 0.9mm Simplex...

Jueves 17 noviembre 2022

Grandway provide all series of optical distribution box(FDB). Products are designed by our professional R&D team to meet the customized needs of customers. What is Fiber Distribution Box (FDB) FDB fiber distribution box is a wall mounted or pole mounted box with or without splitter...

Viernes 11 noviembre 2022

Cantidad : 5000pcs/we - Precio : 100-1000

Fiber Bragg Grating (FBG) is a basic element widely used in telecommunication, laser and sensor fields. With superior apodized technologies, AtGrating can provide high quality FBGs to meet the requirements of different customers. Types of Fiber Bragg Grating (FBG) Apodized FBG FBG...

Viernes 11 noviembre 2022

Cantidad : 5000pcs/we - Precio : 100-1000

FBG optical tilt sensor TL-01 has a linear relationship between the reflection wavelength and the tilt angle. It is suitable for temporary or permanent monitoring. Multiple or other types of fiber grating sensors can be connected in series for real-time monitoring. It is easy to build...

Viernes 11 noviembre 2022

Cantidad : 5000pcs/we - Precio : 100-1000

FBG fiber optic thermometer ST-01 uses stainless steel sleeve packaging technology, which has good anti-corrosion and sealing performance. High-strength armored optical cable is used for fiber lead in and out, which is suitable for harsh measurement environment, can be directly buried...

Viernes 11 noviembre 2022

Cantidad : 5000pcs/we - Precio : 100-1000

FBG Temperature Sensor CT-01 is made of high-voltage resistant insulating materials, and the sensing part is made of high-temperature thermal conductive ceramics, which has the characteristics of fast heat conduction; the product can be mainly used for temperature monitoring of power...

Jueves 27 octubre 2022

Precio : 1-100USD

Optical fiber distribution box, ODB for short. The distribution box is generally used for the wiring connection of optical cables and optical communication equipment, and the optical signal is led out by the optical fiber jumper through the adapter in the distribution box to realize...

Jueves 27 octubre 2022

Precio : 1-100USD

Fiber optic enclosure box, ODB for short. The distribution box is generally used for the wiring connection of optical cables and optical communication equipment, and the optical signal is led out by the optical fiber jumper through the adapter in the distribution box to realize the...

Jueves 27 octubre 2022

Precio : 1-100USD

A fiber coupled collimator is a fiber optic passive device which is a precise alignment of a pigtail and a lens. It can transform diverging light into parallel beam of light or couple the collimating light into a single fiber. It is widely applied in single mode fiber collimator...

Jueves 20 octubre 2022

Optical termination box (OTB), is a compact fiber management box used for FTTH application. Fiber optic terminal box includes faceplate and drop cable protection box which can be used as a termination point for the feeder cable to connect with drop cable in FTTx communication network system...

Viernes 09 septiembre 2022

Fiber Patch Cord or jumper is a fiber cable that has fiber connectors terminated on one or both ends. General use of these cable assemblies includes the interconnection of fiber cable systems and optics-to-electronic equipment. As a quality fiber optic patch cord factory, T...

Viernes 02 septiembre 2022

Cantidad : 5000pcs/we - Precio : 100-1000Usd

Fiber displacement sensor DST-01 is used for long-term measurement of structural beams and large buildings or other concrete, steel structures, building settlements, displacements and landslides. The sensor is installed by pulling rope, which can accurately and quickly measure the...

Viernes 02 septiembre 2022

Cantidad : 5000pcs/we - Precio : 100-1000Usd

FBG accelerometer AL-01 transmits the acceleration change to the FBG after the FBG is properly packaged inside, and calculates the acceleration by measuring the wavelength shift of the fiber grating combined with the fast fiber grating interrogation technology. The AL-01 adopts the...

Viernes 12 agosto 2022

Cantidad : 50000-8000 - Precio : 8-15USD

Optical termination box (OTB), is a compact fiber management box used for FTTH application. Fiber optic cable terminal box includes faceplate and drop cable protection box which can be used as a termination point for the feeder cable to connect with drop cable in FTTx communication...

Miércoles 29 junio 2022

Description of MIL-DTL-32139 Twist Pin Plug Contacts Super mil micro connector, Nano D-sub Twist pin technology with 0.635 mm (.025") contact spacing and nano miniature shells. The ideal solution for applications including aeronautics, space, military, medical and off-shore which...

Miércoles 29 junio 2022

Description of Micro Wireless Backshell Connector This type of device is designed to provide screening, sealing, and reparability.d connector backshells connect cable shields to Micro-D connectors, providing strain relief and mechanical protection. Engineered to help resist corrosion...

Miércoles 29 junio 2022

Description of Micro Wire Backshell Electrical Connector Different backshell types are available for Split EMI/RFI/filter or accommodate larger wire bundles or screw locks allowing the connectors to be fully mated before the hardware is fastened, or for wire or cable strain relief...

Miércoles 29 junio 2022

Description of Micro Solder Cup Contacts METAL SHELL of Micro Solder Cup Connectors Metal shell recommended for environmental and EMI applications. Ideal for prototyping or where pigtail type connectors cannot be used. PLASTIC SHELL of Micro Soldering Aviation Connectors Ideal for...

Miércoles 01 junio 2022

Surface mounted FBG temperature compensation strain sensor MST-01 is mainly used for optical strain measurement on the surface of various structures such as bridge steel box girder, shock absorber damper, metal anchorage and other metal structural parts. The sensor has built-in temperature...

Miércoles 01 junio 2022

Surface mounted FBG strain sensor MS-02 is mainly used to monitor the stress and deformation of various structural surfaces. The sensor is packaged with high-performance stainless steel material, and is installed on the surface of the monitored object by gluing or spot welding without...

Miércoles 01 junio 2022

Surface mounted fbg strain gauge MS-01 can meet the strain measurement needs of various occasions, and can be installed in different monitoring positions such as concrete surfaces or steel surfaces. Mainly used to measure the strain of steel structures and concrete surfaces. The external...

Miércoles 01 junio 2022

Embedded FBG temperature compensation fiber optic strain sensor EST-01 is mainly used for internal fiber optic strain measurement of concrete, reinforced concrete or plastic materials such as foundations, pile foundations, bridges, tunnels, linings, etc, so as to facilitate long-term...

Miércoles 01 junio 2022

Embedded FBG strain sensor ES-01 is specially used for the internal strain measurement of concrete, reinforced concrete or plastic materials, so as to observe the change of internal stress of the structure for a long time, conduct state analysis, and achieve the purpose of warning...

Miércoles 18 mayo 2022

Fiber pigtail optical is a cable that only one end is terminated with connectors. The other end can be melted with optical fiber for a permanent connection. Copperled is one of fiber optic pigtail manufacturers, fiber optic pigtail suppliers, which would like to classify them from 2 aspects...

Martes 19 abril 2022

The drop cable pigtail is a fiber optic cable terminated with a factory installed connector at one end, leaving the other end terminated. Therefore, the connector side can be connected to the equipment and the other side can be fused with fiber optic cables. Fiber optic patch cords...

Jueves 24 febrero 2022

Precio : 10-30USD

Optical fiber distribution frame GPX-K rack mount cabinet is made of top quality steel alloy and treated with galvanizing, oxidation and electrostatic plastic spraying. The frame of small fiber optic cable patch panel cabinet has solid structure and pleasing appearance. Detailed information...

Jueves 24 febrero 2022

Precio : 10-30USD

Fiber optic stripper is used to peel 250um coating of 125um fiber optic, 1.98mm open pore at the top uses to peel protective covering of fiber optic pigtail. After manufacturers preset all of sizes, you do not need to adjust. All of cutting ends have precise mechanical tolerance to...

Viernes 31 diciembre 2021

Keystone Jacks are female connectors used in data communications, particularly local area networks (LANs). The jacks are usually mounted in wall plates or patch panels. As a professional keystone supplier, Copperled can provide from Cat.3 to Cat.8 network Keystone Jack with RoHs...

Viernes 31 diciembre 2021

Fiber optic pigtail is a cable that only one end is terminated with connectors. The other end can be melted with optical fiber for a permanent connection. Copperled is a fiber optic pigtail manufacturer, which would like to classify them from 2 aspects, one aspect by connectors, including E2000...

Domingo 28 noviembre 2021

Discovering a range of PM fiber assemblies, including 2-dimensional fiber array, linear fiber array, PM fiber devices, high-temperature optical components, and optical switch for coherent optical communication, sensing, biophotonics, and quantum communication. Multicore Fiber Fanout...

Miércoles 10 noviembre 2021

Cantidad : 25,000 pie - Precio : 5 - 150USD

Used for temporary endoscopic catheter of the biliary duct through the nasal passage by use of an indwelling catheter. Features of Single-use Nasal Biliary Drainage Catheter The drainage catheter provides the perfect combination of flexibility and stiffness. The drainage catheter...

Jueves 19 agosto 2021

Cantidad : 50,000-80, - Precio : 8-15 USD

Fiber Optic Pigtail is a fiber optic cable capped at either end with connectors that allow fiber optic pigtail cable to be rapidly and conveniently connected to CATV, an optical switch or other telecommunication equipment. The fiber pigtail assembly's thick layer of protection is...

Jueves 19 agosto 2021

Cantidad : 50,000-80, - Precio : 8-15 USD

FTTH fiber patch cord or pigtail, refers to the drop cable ends with a connector plug, used to achieve optical active connection, also be made into a single head pigtails, and Flexible Splice, Quick connect and other products combined application, Connector types are SC-PC(APC) and FC-PC(APC)...

Sábado 24 julio 2021

Shenzhen Copperled is one of professional fiber optic pigtail manufacturers . We provide Patch Cords, Modular Plugs, data cabling system, cable management solutions, sc fiber pigtail, fiber optic pigtail splicing and so on. Want to know more? Please contact us. Pigtail fibre optic...

Sábado 19 junio 2021

FBG Temperature Sensor measures the temperature by utilizing the inherent feature of heat sensitivity of FBG. All the capsulation is specially designed to make the measurement free from the influence of pressure, strain, etc. Features of FBG Temperature Sensor High precision High...

Lunes 26 abril 2021

Cantidad : 1 - Precio : 0,10 €

Disposable medical use ureteral stent for Urology ​ Ureteral stent (double pigtail catheter, or double J stent), is widely used in department of urology surgery. It is suitable for renal calculi, ureteral calculi, hydronephrosis, renal transplantation, renal and ureteral benign tumors...

Lunes 26 abril 2021

SEN-T004 Sensor measures the temperature by utilizing the inherent feature of heat-sensitivity of FBG. All the capsulation is specially designed to make the measurement free from the influence of pressure, strain etc. With its excellent waterproof, stability and reliability, SEN-T04...

Miércoles 24 febrero 2021

MCF Fanout multicore fiber fanout, or the so-called mcf fiber, is a special optical fiber with multiple cores in one cladding. At present, the application of multi-core optical fiber is gradually becoming more and more widespread. It is normally used to connect with the traditional...

Sábado 29 agosto 2020

Precio : <$200

Description This Fiber Optical patch panel is a 19-inch standard type. This Patch panel can be equipped with MPO module box and splicing fiber methods, which are applied to high-density network solutions and splice fiber-distribution network solutions. The Maximum fiber ports with...

Sábado 29 agosto 2020

Precio : <$200

Description This Sliding Fiber Optical patch panel is a 19-inch standard type with 2 steel rails at the side of the panel. It is can be equipped with 2 fiber splice trays for 1U type . The maximum fiber core is up to 48cores. The rack mount fiber patch panel perform fiber splicing...

Sábado 29 agosto 2020

Precio : <$200

Description The sliding rail fiber optic patch panel is made of metal in 19" standard structure. There are 2pcs of stainless steel rails at the sides of the box. The fiber box can be loaded with FC,SC,ST,LC adapters and pigtails. The fiber patch panel is where the end of the optical...

Sábado 29 agosto 2020

Precio : <$200

Description UnitekFiber is manufacturing 2U fiber optical distribution frame . Our ODF frame can be loaded with FC,SC,ST,LC adapters and pigtails. The optical distribution frame is widely used in city telephone, rural telephone network systems, data and image transmission systems...

Sábado 29 agosto 2020

Precio : <$200

Description UnitekFiber is manufacturing 2U fiber optic Fixed ODF frame. Our ODF frame can be loaded with FC,SC,ST,LC adapters and pigtails. The optical fiber ODF frame is widely used in city telephone, rural telephone network systems, data and image transmission systems, and CATV...

Lunes 29 junio 2020

Cantidad : 2500km/wee - Precio : < 200 USD

Description: UnitekFiber provides Corning 12 colorful bulk fiber pigtails. The fiber pigtail is ususally using 0.9mm fiber cable. The cable can be 12 colors. Installed LC pigtail single mode, SC pigtail single mode, FC pigtail single mode or ST pigtail single mode at the one end of the cable...

Jueves 25 junio 2020

Cantidad : 2500km/wee - Precio : < 200 USD

The FTTH terminal box is made of ABS material and is a box for protecting optical fiber cable and pigtail welding at the termination of the optical cable, and is mainly used for straight-through force connection, branch connection of the indoor optical cable and fixing of the cable terminal...

Jueves 25 junio 2020

Cantidad : 2500km/wee - Precio : < 200 USD

What is Fiber Optic pigtail The pigtail is a SC, LC, ST or FC termination connect with a fiber cable at one end. The fiber cable can be different length and the diameter is uasually 0.9mm. Another end of the cable splice with optical cables. Most of the time, the multimode is orange...

Viernes 27 diciembre 2019

Cantidad : Output cap

Description： METAL SHELL of Micro Solder Cup Connectors Metal shell recommended for environmental and EMI applications. Ideal for prototyping or where pigtail type connectors cannot be used. PLASTIC SHELL of Micro Solder Cup Connector Ideal for prototyping or where pigtail type connectors...

Viernes 27 diciembre 2019

Cantidad : Output cap

Description： This type of device is designed to provide screening, sealing, and reparability. Micro d connector backshell connect cable shields to Micro-D connectors, providing strain relief and mechanical protection. Engineered to help resist corrosion and fit a wide range of circular...

Viernes 27 diciembre 2019

Cantidad : Output cap

Description： An electrical crimp is a type of solder less electrical connection. Crimp connectors are typically used to terminate stranded wire. Crimping is normally performed by first inserting the terminal into the crimp tool. The terminal must be placed into the appropriately sized...

Viernes 27 diciembre 2019

Cantidad : Output cap

Description： METAL SHELL of Micro Solder Cup Connectors Metal shell recommended for environmental and EMI applications. Ideal for prototyping or where pigtail type connectors cannot be used. PLASTIC SHELL of Micro Solder Cup Connector Ideal for prototyping or where pigtail type connectors...

Viernes 27 diciembre 2019

Cantidad : Output cap

Description： This type of device is designed to provide screening, sealing, and reparability. Micro-D EMI backshells connect cable shields to Micro-D connectors, providing strain relief and mechanical protection. Engineered to help resist corrosion and fit a wide range of circular connectors...

Martes 15 octubre 2019

Cantidad : 2500km/wee - Precio : <200 USD

What is Fiber Optic pigtail The pigtail is a SC, LC, ST or FC termination connect with a fiber cable at one end. The fiber cable can be different length and the diameter is uasually 0.9mm. Another end of the cable splice with optical cables. Most of the time, the multimode is orange...

Martes 15 octubre 2019

Cantidad : 2500km/wee - Precio : <200 USD

What is Fiber Optic Patch cord Fiber patch cords / pigtails are one of the most widely used basic components in optical communications. A fiber cable with a connector at both ends is called a jumper and only one connector at one end is called a pigtail. They are passive components...

Martes 15 octubre 2019

Cantidad : 2500km/wee - Precio : <200 USD

Description of breakout fiber optic cable Breakout fiber optic cable also can be called as distribution fiber optical cable is designed for Indoor uses. There are two types of breakout fiber cables. One is inside with 2.0/3.0mm tight buffered cables. The fiber glass cores of this...

Miércoles 11 septiembre 2019

Cantidad : 2500km/wee - Precio : <$200

Description of the LC pigtail single mode: UnitekFiber provides Corning 12 colorful bulk fiber pigtails. The fiber pigtail is ususally using 0.9mm fiber cable. The cable can be 12 colors. Installed LC, SC, FC or ST connector at the one end of the cable, the become a pigtail. Our...

Miércoles 11 septiembre 2019

Cantidad : 2500km/wee - Precio : <$200

The FTTH distribution terminal box is made of ABS material and is a box for protecting optical fiber cable and pigtail welding at the termination of the optical cable, and is mainly used for straight-through force connection, branch connection of the indoor optical cable and fixing...

Miércoles 11 septiembre 2019

Cantidad : 2500km/wee - Precio : <$200

Description of breakout indoor fiber optic cable Breakout fiber optic cable also can be called as distribution fiber optical cable is designed for Indoor uses. There are two types of fiber cable breakout. One is inside with 2.0/3.0mm tight buffered cables. The fiber glass cores of...

Miércoles 11 septiembre 2019

Cantidad : 2500km/wee - Precio : <$200

Description: UnitekFiber supplies Fiber Optic Distribution Frame or Optical Patch Panel or ODF Fibre Panel. Our rack mount ODF is in 3U designed and sliding structure. It is made of cold-rolled steel with electrostatic spraying. The ODF frame is loaded with adapter module cassettes...

Viernes 06 septiembre 2019

Precio : 700USD-1000USD

Place of Origin: Jiangsu, China Brand Name: DVP Model Number: DVP-740 Applicable fibers: SM,MM,DS,G655,EDF,G657,Pigtail,Drop cable and connector Fiber cleaved length: 8-22mm Average splice length: 0.02dB(SM),0.01dB(MM),0.04dB(DS,NZDS) Return Loss: ≥60dB Protection sleeve length: 20mm...

Sábado 24 agosto 2019

What is a fiber optic terminal box? Fiber optical terminal boxes is boxes to manage fiber optics cable and pigtails and to protect and distribute fiber optic links in fiber-to-the-home (FTTH) networks. One end is a fiber optic cable and the other end is a pigtail. It means that a...

Sábado 02 febrero 2019

Pigtail Post 6mm, 7mm, 8mm, Electric Fencing Posts, Pigtail Fence Posts 1.Hot dipped galvanised foot,Extra height for effective containment of larger or pushier stock. 2.Quality UV stabilised insulator,Galvanized 1/4″ spring steel shaft.Overall length 41″, out of ground height 33″...

Viernes 18 mayo 2018

http://www.doucciauto.com/product/engine-oil-pressure-sensor/exhaust-back-pressure-sensor-ebp-transducer- 1850352c2-1850352-for-ford-powerstroke-6 -0l-2005-2007-with-pigtail-connector-plu g-kit-dpfe6/ - Description - Exhaust Back Pressure Sensor EBP Transducer 1850352c2 1850352 1850352C1...

Jueves 10 mayo 2018

If the fiber connectors are attached to only one end of a cable, it is known as a fiber pigtail. A fiber pigtail is a single, short, usually tight-buffered, Unlike fiber optic patch cords composed of a fiber optic cable terminated with fiber connectors on both ends, an optical fiber...

Miércoles 09 mayo 2018

http://www.doucciauto.com/product/fuel-pressure-sensor/genuine-icp-fuel-injection-pressure-sensor-1845428 c92-3pp6-12-for-ford-6-0l-powerstroke-di esel-with-pigtail-plug-wire-kit/ - Description - Genuine ICP Fuel Injection Pressure Sensor 1845428C92 3PP6-12 For Ford 6.0L Powerstroke...

Miércoles 09 mayo 2018

http://www.doucciauto.com/product/fuel-pressure-sensor/genuine-icp-fuel-injection-pressure-sensor-1845428 c92-3pp6-12-for-ford-6-0l-powerstroke-di esel-with-pigtail-plug-wire-kit/ - Description - Genuine ICP Fuel Injection Pressure Sensor 1845428C92 3PP6-12 For Ford 6.0L Powerstroke...

Miércoles 09 mayo 2018

http://www.doucciauto.com/product/fuel-pressure-sensor/fuel-injection-control-pressure-icp-sensor-1875784 c92-1875784c93-3pp6-21-for-international -navistar-with-pigtail-plug/ - Description - Fuel Injection Control Pressure ICP Sensor 1875784C92 1875784C93 3PP6-21 For International...

Miércoles 09 mayo 2018

http://www.doucciauto.com/product/fuel-pressure-sensor/fuel-injection-control-pressure-icp-sensor-1845536 c91-3pp6-8-for-international-navistar-wi th-pigtail-plug-wire-kit/ - Description - Fuel Injection Control Pressure ICP Sensor 1845536C91 3PP6-8 For International Navistar With...

Miércoles 09 mayo 2018

http://www.doucciauto.com/product/fuel-pressure-sensor/fuel-injection-control-pressure-icp-sensor-1845274 c92-1845274-for-ford-excursion-powerstro ke-with-pigtail-plug-wire-kit/ Description Fuel Injection Control Pressure ICP Sensor 1845274C92 1845274 For Ford Excursion Powerstroke...

Lunes 19 marzo 2018

OMC BRP New OEM Side Surface Mount Remote Control 5006180 An improved surface mount remote control provides better boating performance and reliability. The BRP remote control is designed for more positive shifting and smoother throttle operation. The remote control handle features...

Martes 27 septiembre 2016

Cantidad : 1 pc - Precio : against the qty

pigtail fibra es un producto similar de conexión de fibra diferencia cable.The es que pigtail fibra tiene un solo conector de fibra en el extremo y una longitud de cable de fibra expuesta en el otro extremo en el otro extremo. MT-RJ latiguillos de fibra óptica utilizan los conectores...

Martes 27 septiembre 2016

Cantidad : 1 pc - Precio : against the qty

pigtail de fibra óptica es un cable que sólo un extremo se termina con conectores, el otro extremo puede ser fundido con la fibra óptica para una conexión permanente. conector LC es ahora uno de los conectores más populares en el mundo. una regata de cerámica de 1,25 mm hace LC de...

Martes 27 septiembre 2016

Cantidad : 1 pc - Precio : against the qty

pigtail de fibra óptica es un cable que sólo un extremo se termina con conectores, el otro extremo puede ser fundido con la fibra óptica para una conexión permanente. conector SC tiene un casquillo de cerámica de 2,5 mm. Su peso ligero y características rentables permiten diferentes...

Martes 27 septiembre 2016

Cantidad : 1 pc - Precio : against the qty

conector E2000 cuenta con un obturador de muelle que protege totalmente el casquillo del polvo y los arañazos. Con puntera 1,25 mm, mecanismo de complemento, que está disponible en monomodo y multimodo. E2000 espirales de fibra óptica también tienen una amplia gama de aplicaciones...

Martes 27 septiembre 2016

Cantidad : 1 pc - Precio : against the qty

Descripción: FTTH mini 4 puertos cuadro de terminación cable de fibra óptica. 1x2 usado para interior y exterior application.can ser instalado o divisor 1x4 PLC modelo de FTTH / caja de terminales de tipo C es ligero y compacto, especialmente adecuado para la conexión de cables...

Martes 27 septiembre 2016

Cantidad : 1 pc - Precio : against the qty

Descripción: El / 12 núcleo / 16 núcleo de la fibra óptica caja de terminales de interior / 8 núcleo central 4 está diseñado con el soporte de la puerta para la instalación y la gestión de cables de fibra conveniente. Además del calor manga de encogimiento, tornillos fijos y de...

Domingo 25 septiembre 2016

Cantidad : 1 pc - Precio : against the qty

Visión de conjunto: Esta caja de distribución termina hasta 2 cables de fibra óptica, ofrece espacios para los divisores y hasta 48 fusiones, asigna 24 adaptadores SC y funciona bajo tanto en interiores como al aire libre. Se trata de una rentable solución de proveedor perfecto...

Domingo 25 septiembre 2016

Cantidad : 1 pc - Precio : against the qty

Descripción: La caja de distribución de fibra óptica se utiliza ampliamente como un punto de terminación para cable de alimentación para conectar con cable de derivación. El empalme de fibra, la división, la distribución se puede hacer en esta caja, y mientras tanto que proporciona...

Domingo 25 septiembre 2016

Cantidad : 1 pc - Precio : against the qty

Descripción: modelo de FTTH fibra óptica caja de terminales es un recién desarrollado por nuestra empresa para la aplicación de FTTH. El cuadro es ligero y compacto, especialmente adecuado para la conexión de cables de fibra protectora y trenzas en FTTH. caracteristicas: ABS material...

Domingo 25 septiembre 2016

Cantidad : 1 pc - Precio : against the qty

Descripción: Suministros de calidad superior de latiguillos de fibra óptica con precios muy competitivos, cada pieza de cable de conexión se prueba en el taller antes de la entrega al cliente. Será recibido del cliente / necesidades especiales. ensamblajes de cable de fibra son...

Domingo 25 septiembre 2016

Cantidad : 1 pc - Precio : against the qty

Empalmes de fibra óptica casete, fibra óptica Bandeja de empalme JF-2022 Descripción: Color: blanco y negro opcional fusión de fibra óptica y los empalmes mecánicos se colocan en cierres mecánicos que se hace referencia como "cajas de empalmes", "bandejas de empalme" o "organizadores...

Domingo 25 septiembre 2016

Cantidad : 1 pc - Precio : against the qty

Descripción: Este montaje en rack de panel de conexiones se utiliza para terminar lado de un cable de fibra óptica de los proveedores. Se trata de una unidad de acero con posibilidad de empalmar hasta fibras ópticas externas de trenzas. Los empalmes y piezas de fibras ópticas...

Jueves 26 mayo 2016

Cantidad : 1000 - Precio : 0,10 €

Aplicación: Vidrio fusibles, son ampliamente utilizados en fuentes de alimentación, el cambio de alimentación, adaptador, cargador, conductor de suministro de energía LED, todo tipo de electrodomésticos Vende el producto Point: Especificaciones dominantes / características especiales...

Domingo 20 marzo 2016

Polarization Beam Combiner/Splitter (PBC/PBS) 1. Description The PBC/PBS is built based on PM collimator and Wollaston prism, with All-glass technique sealed process. It can combine two polarization state into one single mode fiber or split single mode into two vertical polarization states...

Domingo 20 marzo 2016

1x2 DWDM Component Features l Low Insertion Loss l Wide pass band l High Channel Isolation l High Stability and reliability Applications l Channel Add/Drop l DWDM Network l Fiber Optical Amplifier Ubicación : A1 Building,Puhua Science and Technology Park,Longhua New District...

Domingo 20 marzo 2016

1x2 DWDM Component Features l Low Insertion Loss l Wide pass band l High Channel Isolation l High Stability and reliability Applications l Channel Add/Drop l DWDM Network l Fiber Optical Amplifier Ubicación : A1 Building,Puhua Science and Technology Park,Longhua New District...

Domingo 01 febrero 2015

AOFU allfrpCOM make fiberglass rods Unmatched strength .Inbuilt colour options .Dimensional stability .U.V. stabilised .Excellent cross,Totally insulating it will not rust, rot or crack due to cold. Fiberglass rods are very durable they flex upon impact. The pointed tips make driving...

Viernes 20 junio 2014

Cantidad : 10 pcs - Precio : 1 usd

Patch cord de fibra óptica Características: Chaqueta Fiber Cable PVC Color: Monomodo: Amarillo Multimodo: Naranja Blindado: Azul OM3: Aqua (10 Gbps) OM4: Purple OM3 cuerda de remiendo de la fibra Un cable de conexión es un cable de fibra óptica se utiliza para conectar un...

Jueves 13 septiembre 2012

Cantidad : 10000pcs - Precio : Negotiable

OPPTON Supply optical fiber jumper,OM3 Patch cord,armored patch cord,Waterproof pigtail,ribbion pigtail,4/6/8/12 color multifiber pigtail,fast connector,adapter,attenuator,FBT coupler/splitter,PLC Splitter,rack mounted splitter,LGX splitter,fiber patch panel,ODF,FTTH BOX ,splice enclosure...

Jueves 13 septiembre 2012

Cantidad : 10000pcs - Precio : Negotiable

OPPTON Supply optical fiber jumper,OM3 Patch cord,armored patch cord,Waterproof pigtail,ribbion pigtail,4/6/8/12 color multifiber pigtail,fast connector,adapter,attenuator,FBT coupler/splitter,PLC Splitter,rack mounted splitter,LGX splitter,fiber patch panel,ODF,FTTH BOX ,splice enclosure...

Jueves 13 septiembre 2012

Cantidad : 100000pcs - Precio : Negotiable

OPPTON Supply optical fiber jumper,OM3 Patch cord,armored patch cord,Waterproof pigtail,ribbion pigtail,4/6/8/12 color multifiber pigtail,fast connector,adapter,attenuator,FBT coupler/splitter,PLC Splitter,rack mounted splitter,LGX splitter,fiber patch panel,ODF,FTTH BOX ,splice enclosure...

Lunes 17 septiembre 2007

Waterproof fiber optic pigtail cable Description: Waterproof Pigtail is a length of fiber with one-end connector attached, suitable for out door use and adverse environmental condition. Features: Excellent water-resistance performance Waterproof, rigid and anti-corrosive copper connector...

Sábado 16 junio 2007

Features & Availabilities -Srew-thread coupling mechanism -Simplex and Duplex assemblies available -Singlemode(9/125um) and multimode(50/125um or 62.5/125um) available -PC polishing available -Hybrid patch-cords available upon request -Pigtail available 　 Applications -Connection...

Sábado 16 junio 2007

Features & Availabilities -Screw-thread coupling mechanism -Singlemode (9/125um) and multimode (50/125um or 62.5/125um) available -PC polishing available -Hybrid patch-cords available upon request -Pigtail Available Applications -Connection of optical transmission equipments and devices...

Sábado 16 junio 2007

Features & Availabilities -Screw-thread coupling mechanism -Singlemode(9/125um) and multimode(50/125um or 62.5/125um) available -PC and APC polishing available -Hybrid patch-cords available upon request -Pigtail available 　 Applications -Connection of optical transmission equipments...

Sábado 16 junio 2007

Features & Availabilities -Single-position plug with push-pull coupling mechanism -SFF(Small Form Factor), compact size -Simplex and duplex available -Singlemode(9/125um) and multimode(50/125um or 62.5/125um) available -PC and APC polishing available -Interferometry test available...