TYPE - 45692 Anuncios

Miércoles 18 octubre 2017

Pressure Protection Device for the equipment and pipeline of the steam, ect. The working temperature with Carbon Material Type are less than 425℃ and with WC6 Material type are less than 500℃ and WC9 Material Type are less than 550℃. Ubicación : Heyi Industrial Zone,Oubei Town, 325105 Oubei ...

Miércoles 18 octubre 2017

A27H type are used for the equipment and pipeline of water, air, steam etc. Medium what the working temperature are less than 200℃.A27Y type are used for the equipment and pipeline of the quality with corrode are less than 200℃.Take for extra pressure devices. Ubicación : Heyi Industrial Zone...

Miércoles 18 octubre 2017

Introduction: 1.In low lift valves, the disc only lifts a distance of 1/24th of the bore diameter. The discharge area is determined entirely by the position of the disc, and since the disc only lifts a small amount, the capacities tend to be much lower than those of full or high lift valves...

Miércoles 18 octubre 2017

A full lift safety valve is one in which the disc lifts sufficiently, so that the curtain area no longer influences the discharge area. The discharge area, and therefore the capacity of the valve are subsequently determined by the bore area. This occurs when the disc lifts a distance...

Miércoles 18 octubre 2017

Brief Introduction. This series pressure reducing valve is a new type regulating valve which adopts piston to replace the diaphragm. The performance is reliable and it's can be used for a long time. The down pressure can be adjusted according to the requirement, and it can be set...

Miércoles 18 octubre 2017

Brief Introduction. This series reducing valve is pilot piston type reducing valve, mainly composed of main valve and pilot valve. The main valve consists of valve seat, main valve disc, piston, cylinder sleeve, and spring. The piston valve consists of valve seat, valve flap, membrane...

Miércoles 18 octubre 2017

Advantages 1, To achieve greater CV value and wider adjustable ratio S shaped structure body is generated from the fluid analysis in a unique, can be suppressed by flow path shape complex and eddy current as well as flow path suddenly expand caused by complex and irregular flow phenomenon...

Miércoles 18 octubre 2017

This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the permission pressure differential is big, and operation is steady. Compared with the ordinary...

Miércoles 18 octubre 2017

The valve has double seats.The fluid outflow through the valve core of the upper and lower sealing surface.The unbalanced pressure is small.It is a balanced structure,which are widely used in petroleum,chemical,pharmaceutical,metall urgical,power plants,such as the industrial sector...

Miércoles 18 octubre 2017

The valve has double seats.The fluid outflow through the valve core of the upper and lower sealing surface.The unbalanced pressure is small.It is a balanced structure,which are widely used in petroleum,chemical,pharmaceutical,metall urgical,power plants,such as the industrial sector...

Miércoles 18 octubre 2017

A42Y-C type safety valve are used for the equipment and pipeline of the air, petroleum gas, liquid etc medium what the working temperature are less than 300℃. A42Y-P type and A42Y-R type are used for the equipment and pipeline of the quality with corrode medium what the working temperature...

Miércoles 18 octubre 2017

Introduction of low lift safety valve 1.In low lift safety valves, the disc only lifts a distance of 1/24th of the bore diameter. The discharge area is determined entirely by the position of the disc, and since the disc only lifts a small amount, the capacities tend to be much lower...

Miércoles 18 octubre 2017

DIN Standard Safety Valve Features: Safety valves were first used on steam boilers during the industrial revolution. Early boilers without them were prone to accidental Explosion. Safety valves also evolved to protect equipment such as pressure vessel (fired or not) and heat exchangers...

Miércoles 18 octubre 2017

Brief Introduction. This series reducing valve mainly composed of valve body, valve seat and valve flap. It adopts the structure of double valve seat and double cone valve flap. It adopts pressure balancing valve flap. Realize remote control and auto control through valve flap elevation...

Miércoles 18 octubre 2017

Brief Introduction. This series reducing valve is direct action membrane type spring reducing valve, mainly composed of membrane, adjusting spring, valve seat and valve flap. It sense the change of lower stream pressure through the membrane and drive the valve flap, change and control...

Miércoles 18 octubre 2017

Brief Introduction. This series reducing valve is direct action membrane type spring reducing valve, it is manufactured and designed on the basis of advantages of foreign same products. It is mainly composed of membrane, valve flap, and adjusting spring. It sense the change of lower...

Miércoles 18 octubre 2017

Brief Introduction. YB43X is Proportion type pressure reducing valve,as its floating piston ends have different cross-sectional area,there will be a fixed pressure differential between the valve inlet and outlet,thereby change the outlet pressure conditions,achieve the purpose of decompression...

Miércoles 18 octubre 2017

Brief Introduction. This series reducing valve is pilot piston type reducing valve, mainly composed of main valve and pilot valve. The main valve consists of valve seat, main valve disc, piston, cylinder sleeve, and spring. The piston valve consists of valve seat, valve flap, membrane...

Miércoles 18 octubre 2017

Brief Introduction. This pressure reducing valve is robust direct acting bellows pressure reducing valve designed for use on steam,air and inert industrial type gases.The valve is available in four nominal sizes: DN25,DN32 ,DN40 and DN50. Set the outlet pressure through adjusting spring...

Miércoles 18 octubre 2017

Brief Introduction. RP-6 high-sensitivity steam pressure reducing valve is pilot piston type pressure reducing valve mainly used for steam.The product made following improvement on the basis of normal pressure reducing valve, enlarge the piston area, change the throttle structure...

Miércoles 18 octubre 2017

Brief Introduction. This series reducing valve is pilot piston type reducing valve for steam, mainly composed of main valve and pilot valve. The main valve consists of valve seat, main valve disc, piston, cylinder sleeve, and spring. The piston valve consists of valve seat, valve flap...

Miércoles 18 octubre 2017

Brief Introduction. DP27 Pilot Operated Pressure Reducing Valve is the new type pilot extra-huge membrane pressure reducing valve developed by our company,similar to Spirax Sarco Design. It is greatly improved on basis of normal pressure reducing valve. The membrane use new material...

Miércoles 18 octubre 2017

Brief Introduction. DP17 Pilot Operated Pressure Reducing Valve, similar to Spirax Sarco Design, mainly used for steam system to reduce pressure, which is superior to normal piston type steam pressure reducing valve. This Pilot Operated Pressure Reducing Valve has another prominent features...

Miércoles 18 octubre 2017

Self Operated Pressure regulating Valve Introduction GAZZC, GAZZV series self operated difference (little) Pressure Control Regulating valve Can be used in nominal pressure PN0.1 , PN10. The difference (little ) presses the regulation of segmenting. From 50mm.WC to 0.1MPa. self operated...

Miércoles 18 octubre 2017

Low Temperature Pneumatic Globe Control Valve / With Extended Stem Characteristics: This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve Disc, the unbalanced force is small, the permission...

Miércoles 18 octubre 2017

HCB Cage Type Double Seat Pneumatic Pressure Control Valve Characteristics: This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the permission pressure...

Miércoles 18 octubre 2017

HCN Low Noise Cage Type Regulating Valve is mainly designed for reducing the medium noise. As the gas will expand, many Symmetric holes were designed to reduce pressure drop. The flow port is S pattern, and the flow-guiding part around the cage can also make the fluid flow smoothly...

Miércoles 18 octubre 2017

1. HLC Small Size Single Seat Pneumatic Pressure Control Valve / Sleeve Type Characteristics: This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the...

Miércoles 18 octubre 2017

1. HTS Globe Type Pneumatic Diaphragm Control Valve Characteristics: This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the permission pressure differential...

Miércoles 18 octubre 2017

1. HTS Globe Type Pneumatic Diaphragm Control Valve Characteristics: This product is composed of the pneumatic multi-springs, pneumatic actuator and the low flow resistance sleeve. This valve uses the balanced valve core, the unbalanced force is small, the permission pressure differential...