POWDER&OIL - 17110 Anuncios

Viernes 08 septiembre 2023

TTA27 (dicyclopentadiene epoxide) is a typical cycloaliphatic epoxy resin. Its molecular structure is characterized by a close bicyclic structure between two epoxy groups and a stable methylene bridge across the six-membered ring. Therefore, the cured product of TTA27 has the characteristics...

Viernes 08 septiembre 2023

Features of Hydraulic Butt Fusion Welding Machines Removable PTFE coated heating plate with high accurate temperature control system; Electrical planning tool; Be made of lightweight and high strength material; simple structure, small and delicate, user friendly; Low starting pressure...

Jueves 07 septiembre 2023

Cantidad : 10 Ton/day - Precio : 2300 USD/Ton--3700 U

Ear Loop The selection of earloop including 3mm round elastic and round black elastic materials. Our company insists on controlling the quality of products from the source. So in the selection of polyester and spandex suppliers, we insist that the raw materials of each supplier...

Jueves 07 septiembre 2023

Cantidad : 10 Ton/day - Precio : 2300 USD/Ton--3700 U

Face Masks made of bfe99 meltblown can effectively block the spread of bacteria. The Overview of CK302017 BFE95,BFE98,BFE99 Medical Melt-blown BFE We can provide different standard melt-blown nonwoven fabric for sale used for different products, especially the 20g m2 meltblown are...

Jueves 07 septiembre 2023

Name: Hydroxy Terminated Polydimethylsiloxane (Methyl Silicone Oil) Melt Point (℃): -59 Spontaneous combustion point (℃): 450 Saturated vapor pressure (KPa): No Data Explosive: No Data Solubility: Soluble in benzene, toluene, ethylene, ethyl ether, partially soluble in ethanol, butanol...

Jueves 07 septiembre 2023

Product Name: D4 Silicone Octamethylcyclotetrasiloxane Molecular Formula: (CH3 ) 8 Si4 O4 Octamethylcyclotetrasiloxane CAS No.: 556-67-2 Physical and Chemical Properties: Freezing Point: 17~18℃ Boiling Point: 175-176℃ Flash Point: 60℃ Relative Density（water=1）: 0.956 Appearance: Colorless...

Jueves 07 septiembre 2023

Name: Methyltrichlorosilane (M1) Feature: This product is a colorless transparent liquid. It is the main material of silicone products to produce methyltriethoxysilane and silane crosslinking agent (methyl triethoxysilane and methyltrimethoxysilane), and produce silicon resin, special coatings...

Jueves 07 septiembre 2023

Name: Fumed silica Appearance: Fluffy white powder. Technical Data of Fumed Silica Item Indexes The nitrogen adsorption specific surface area/（m2/g） Typical values±30 Loss on ignition/% ≤ 2.5 Silica content/% ≥ 99.8 Suspension PH 3.7~4.5 Al2O3 content/（mg/kg） ≤ 400 TiO2...

Jueves 07 septiembre 2023

Precio : US $10-500/ Piece

API6D Cast Steel Floating Ball Valve Worm Gear Cast Steel Floating Ball Valve Pneumatic Cast Steel Floating Ball Valve Electric Cast Steel Floating Ball Valve Cast Steel Floating Ball Valve API6D CAST STEEL FLOATING BALL VALVE MstnLand's series of cast steel floating water ball valves...

Jueves 07 septiembre 2023

Precio : US $10-500/ Piece

MstnLand, as one of professional cast iron gate valves suppliers and cast iron gate valves manufacturers, provides high performance gate valve products, mainly include bolted bonnet wedge gate valves and pressure seal bonnet gate valves, which are widely used in gas, petrochemical...

Jueves 07 septiembre 2023

Precio : US $10-500/ Piece

BUTTERFLY VALVES MstnLand provides high performance water butterfly valve products, including Hard seal and soft seal butterfly valve, triple offset/double offset/centric butterfly valve, Lug type /Wafer type/Hoop type/Flanged ended butterfly valve and three-way butterfly valve. Especially...

Jueves 07 septiembre 2023

Precio : US $10-500/ Piece

BRASS BALL VALVES Brass ball valves refer to ball valves made of brass material, namely the valve body is brass. Brass is the alloy that is made up of copper and zinc. It is called normal brass if it is made up of copper and zinc only. However, it is called special brass if it is...

Jueves 07 septiembre 2023

For making denture bases, Hugedental offers a series of Denture Base Polymers with different curing types and shades to fulfill the needs of lab technicians. The product is featured with various benefits like natural beauty, drop resistance, no bubbles, etc. The product is composed...

Jueves 07 septiembre 2023

Centering on Synthetic Polymer Teeth, HUGE Dental has been a top dental lab material supplier and provides a set of comprehensive dental laboratory supply solutions for our customers, which is supplemented by Light Curing Tray Material, Silicone Duplicating Materials in dentistry...

Jueves 07 septiembre 2023

Cantidad : 20GP

CSA Binder Introduction: Calcium Sulfoaluminate binder is pure CSA clinker that grinded without any gypsum. It is a hydraulic cementitious material blend high in C4A3S (Calcium Sulfoaluminate Crystals). CSA Binder characteristics • Appearance: light grey powder • Rapid strength...

Jueves 07 septiembre 2023

Cantidad : 20GP

Description of High Temperature Alumina Cement Calcium aluminate cement, alumina cements or high alumina cements are obtained by the reaction at high temperature of lime (from limestone) and alumina (contained in natural minerals like bauxite). The aluminate cement obtained after...

Jueves 07 septiembre 2023

Cantidad : 20GP

Amorphous Calcium Aluminate Details: The mineral of amorphous calcium aluminate (non-crystalline calcium aluminate) is C12A7. The alumina content is about 50%. However, the appearance of amorphous calcium aluminate is different from crystaline calcium aluminate or CA. It looks...

Jueves 07 septiembre 2023

Cantidad : 20GP

CSA expansive additive description: The CSA expansive additive is obtained by blending natural anhydrite with clinker powder which consists of calcium sulfoaluminate and CaO. This CSA expansive additive is always mixed with ordinary cement. When mixed in the proper proportion with...

Jueves 07 septiembre 2023

Cantidad : 20GP

CSA (Calcium Sulfoaluminate Cement) cement is a special cement used in many applications where early high strength and fast setting development are necessary. CSA cement is short for Calcium Sulfo-aluminate Cement, also named rapid setting cement, high strength cement, fast hardening cement...

Jueves 07 septiembre 2023

Cantidad : 20GP

Description of Calcium Aluminate Cement Calcium aluminate cement, alumina cements or high alumina cements are obtained by the reaction at high temperature of lime (from limestone) and alumina (contained in natural minerals like bauxite). The aluminate cement obtained after cooling...

Jueves 07 septiembre 2023

Cantidad : 20GP

Amorphous Calcium Aluminate Details: The mineral of amorphous calcium aluminate (non-crystalline calcium aluminate) is C12A7. The alumina content is about 50%. However, the appearance of amorphous calcium aluminate is different from crystaline calcium aluminate or CA. It looks...

Jueves 07 septiembre 2023

Cantidad : 20GP

What Is CSA Cement? CSA (Calcium Sulfoaluminate Cement) cement is a special cement used in many applications where early high strength and fast setting development are necessary. cement CSA is short for calcium sulphoaluminate cement, also named rapid setting cement, high strength cement...

Jueves 07 septiembre 2023

TSP diamond is made of diamond micro powder and a small amount of binder sintered under high temperature and high pressure. It has high wear resistance, strong impact toughness, good thermally stability, and dense structure, and is widely used in the manufacture of petroleum, geological...

Jueves 07 septiembre 2023

E-Grind is a professional PCD wire drawing dies supplier and manufacturer, we provide two series of Diamond Wire Drawing Die Blanks: CDB Series and TDBY Series. 5 grades of grain size available: 3 microns, 5 microns, 10 microns, 25 microns and 50 microns. What is PCD Wire Drawing Dies Used for...

Jueves 07 septiembre 2023

E-Grind produces high-quality Polycrystalline diamond composite(PDC) and polycrystalline diamond compact cutters. Polycrystalline diamond composite(PDC China) sheet is made of diamond particles and cemented carbide matrix sintered at 60,000 atmospheres, high temperature and high pressure...

Jueves 07 septiembre 2023

As one of the most professional abrasive powder suppliers in China, E-Grind offers a full range of superabrasives: Synthetic diamond, Cubid Boron Nitrid and related Solid products like CVD, TSP, PDC, PCD&PCBN, Diamond Wire-Draing Die blanks, for Drilling, Sawing, Cutting, Grinding...

Jueves 07 septiembre 2023

E-Grind supplies the whole range of PCD blanks and PCD PCDN for cutting tool purpose. The largest Diameter of PCD blanks and PCDN blanks available can be 55mm. Our PCD blanks and PCDN blanks provide high wearing resistance ability and high finishing surface. Application of PCD Blanks...

Jueves 07 septiembre 2023

E-Grind's metal bond micron products offer good Roughing, Lapping and finishing results. For resin bond, vitrified bond, and electroplated bond. Application of micron diamond powder: for stone, watch, optical glass, etc. Types of Metal Bond Micron Diamond for Sale Micron Diamond Powder...

Jueves 07 septiembre 2023

E-Grind's metal bond mesh diamond combines both using life and working efficiency. Suitable for resin bond, vitrified bond, metal bond, and electroplated bond system. Application: glass, PCD/PCBN, dental tools, gemstone Metal Mesh Bond Diamond for Sale Metal Bond Mesh Diamond: EA-M19...

Jueves 07 septiembre 2023

TP400 cable probe system mainly used in various specifications of CNC grinding machines, CNC lathes, and especially measuring devices. TP400 CNC digitizing cable probe system includes a TP400 trigger probe unit, two four-core, oil-proof shielded cables,s and standard measuring software...