PROPERTIES - 6882 Anuncios

Friday 16 September 2022

3mil PTFE Cloth, glossy surface and high heat resistant The Details of 3mil PTFE Cloth Teflon Cloth in thickness of 3mil or 0.08mm is also called PTFE coated fiberglass offers 100% non stick surface with excellent high and low temperature resistance, black PTFE cloth is also chemically inert...

Friday 16 September 2022

Cantidad : 10000ton/y - Precio : 2.2-6usd

Hybrid Bonded Magnetic Compounds Introductions： By mixing different kinds of magnetic powder in different proportions, we can obtain a series of Hybrid Magnets whose magnetic properties are higher than ferrite bonding magnet and lower than bonded neodymium (anisotropic) magnet, which...

Friday 16 September 2022

Cantidad : 10000ton/y - Precio : 2.2-6usd

High Gravity Compounds High-density plastic has a density of up to 13g/cm3 by adding high-density powder to the plastic matrix, which is higher than that of ordinary metal. It can be used as a shielding enclosure for high-energy rays, counterweight material, substitute material for lead, etc...

Friday 16 September 2022

Cantidad : 10000ton/y - Precio : 2.2-6usd

Magnets and magnet assemblies have to meet increasingly complex requirements. Hard-Ferrite Plastic Bonded Magnets Compounds Compared to rare earth common magnetic materials, hard ferrites has obvious cost advantage due to the use of cheap strontium oxide, barium oxide and iron oxide...

Friday 16 September 2022

Cantidad : 10000ton/y - Precio : 2.2-6usd

Light density and low cost of ferromagnetic compounds (hard ferrite magnets) create a high-cost performance. Therefore, it has the largest market demand and is the most extensively used in the field of modern home appliances, office supplies, communication devices, and defense. The...

Friday 16 September 2022

Cantidad : 10000ton/y - Precio : 2.2-6usd

Introduction SmFeN magnetic material uses abundant rare-earth Sm element instead of expensive elements of Nd, Dy, Co, etc, and is the most cost-effective rare earth permanent best ferromagnetic material. Compared with the bonded neodymium magnet, the bonded SmFeN magnets has higher...

Friday 16 September 2022

Cantidad : 10000ton/y - Precio : 2.2-6usd

Bonded Neodymium Magnetic Compounds Introductions Bonded neodymium magnets (bonded NdFeB magnet) has high mechanical performance and no need for surface coating and other processes, which can effectively avoid the shortcomings of brittle and poor corrosion resistance of sintered NdFeB magnet...

Friday 16 September 2022

Cusn8 Dive Watch Case CUSN8 is tin bronze containing iron and manganese. It belongs to high-strength heat-resistant bronze. It has stable mechanical properties at high temperatures (400°C), and has good anti-friction properties. It has good corrosion resistance in the atmosphere, fresh water...

Friday 16 September 2022

Cantidad : 150000 ton - Precio : USD 2500/T to USD 35

T-slot aluminium profile is a kind of structural aluminium extrusion used for a wide variety of framing applications due to its significant versatility. As an important category in Otalum's industrial aluminum extrusion profile series, Otalum's aluminium profile t track is very easy...

Thursday 15 September 2022

Precio : 1000-6000USD

MF rod, also known as speed drill rod, has a male thread at one end and a female thread at the other end. It can directly connect to the shank adapter without the aid of a coupling sleeve, which eliminates the defect that the equal diameter thread connection is prone to vibration...

Thursday 15 September 2022

The extruder screws and barrels are used in the feeding section, the natural exhausting section and the vacuum exhausting sections. Depending on the materials produced, the placement of the open barrel is different. The opening shapes of twin screw extruder barrel can be square, rectangular...

Thursday 15 September 2022

Screw barrels plays an importante role inside extruder. Barrel and screw elements are corporated each other to support extruder process smoothly. There is both a feed barrel for the main feed and a extruder barrel for top-head degassing. Technical Data of Extruder Feed Barrels Brand：LESUN...

Thursday 15 September 2022

Precio : 1000-6000USD

Tunneling & Underground Project TBM cutters, Top hammer drilling tools and raise boring cutters for Tunnelling & Underground Engineering Every tunneling and underground engineering construction requires the cooperation of multiple types of equipment. We can provide safe, high-efficiency...

Thursday 15 September 2022

There are two main types of extruder closed screw barrels, 4D and 6D, with 4D being the most. According to the different selection of the materials from the customers, the corresponding bushing materials can be selected to meet the needs of the modified customer. Technical Data of...

Thursday 15 September 2022

The main function of the conveying extruder screw elements is to help the material forward in the cylinder, and it will determine the conveying speed according to the size of the lead. The larger the lead, the faster the conveying speed. Conversely, the smaller the lead, the slower...

Thursday 15 September 2022

The twin screw barrel manufacturer, Lexun, provides different types of screw barrel, including open barrel, closed barrel, open side barrel and liquid barrel for your needs. Extruder Screw Barrel Diameter: φ20 mm ~φ300 mm Twin Screw barrel Properties: Wear-resisting, Corrode-resisting...

Thursday 15 September 2022

Extrusion barrel plays an importante role inside extruder. Barrel and screw elements are corporated each other to support extruder process smoothly. Extruder side open barrels have opening both at the top and side . The upper opening is for venting purposes. Technical Data of Extruder...

Thursday 15 September 2022

Ultraviolet UV Rays is the most safe water disinfection method. Ultraviolet germicidal irradiation (UVGI) is the use of ultraviolet radiation to destruct the DNA and RNA of bacteria or virus. The ultraviolet radiation (UVC) can cause irreversible destruction of microbial DNA molecules...

Thursday 15 September 2022

Advantages Of Infrared Heat Lamp Tube With White Coating Infrared heating tube unlike convection or conduction, dose not rely on any medium to transfer heat from infrared source to the object being heated, heat directly to the object. Long serving life of infrared heating lamp tube...

Thursday 15 September 2022

Teflon adhesive tape is also known as PTFE heat resistant adhesive tape. First, glass fiber is used as the base cloth, coated with Teflon emulsion, and dried to make Teflon glass fiber cloth. It is a kind of heat-resistant tape made of silicone adhesive after secondary coating. The...

Thursday 15 September 2022

PTFE coated glass fabric adhesive tape uses a material made of glass fiber cloth impregnated with a tetrafluoroethylene resin (PTFE) dispersion solution and fired as the base material. PTFE coated glass tape has one surface treated with silicone adhesive and has excellent heat resistance...

Wednesday 14 September 2022

Stainless Steel 304 Fasteners Even though they are small and have a simple look, 304 stainless steel fasteners are quite important in every application. Fasteners serve as the connecting medium for everything from tiny pipe connections to lofty buildings and skyscrapers. Small screws...

Wednesday 14 September 2022

Cantidad : 10000 Piec - Precio : 150-10000

The Steel body PDC bit body is made of AISI 4145H round steel. The cost of Steel body PDC bit is lower than that of Matrix body PDC bit. Every Steel body bit shall have heat treatment, to improve the mechanical properties of steel, to eliminate residual stress and improve the cutting performance...

Saturday 10 September 2022

Natural graphite flakes is widely used in advanced refractory materials and coatings in metallurgical industry. After in-depth processing, graphite emulsion can be produced, which is used in lubricants, demoulding agents, drawing agents, conductive coatings and so on. NATURAL FLAKE...

Saturday 10 September 2022

Hot press vacuum press is used for the test parameters of the material properties, including the fluidity of composite materials, resin fluidity, and gel time. The composite material is formed after hot pressing and curing. The parameters of temperature and pressure in the hot pressing...

Saturday 10 September 2022

Due to the advantages of hardness and tensile strength, 5754 aluminum plate have been used in high-speed rail barrier plates in recent years. Application of 5754 Aluminum Plate In foreign countries, 5754 aluminum plate with different heat treatment conditions are the main materials...

Saturday 10 September 2022

Precio : 1-10usd

Tcoptics, a professional sapphire window company, provides all types of custom sapphire glass window, which have a series of excellent physical and chemical characteristics such as high strength, high hardness, high temperature resistance, abrasion resistance, corrosion resistance...

Saturday 10 September 2022

Precio : 1-10usd

Borosilicate is the alternative for borofloat 33 (BF33). Therefore, this kind of glass is called high borosilicate glass. 1. Substrata for each level of glass processing. 2. Borosilicate Glass Applications: architecture, furniture, mirrors, automobiles. Borosilicate Glass Windows...

Wednesday 07 September 2022

Quercetin Dihydrate Product Name: Quercetin Botanical Name: Sophora japonica L. CAS No: 117-39-5 Molecular Formula: C15H10O7 Molecular Weight: 302.24 Color: Yellow-Green powder Used Part: Flower Bud Purity: 95% HPLC Description: Quercetin is a type of plant-based chemical, or phytochemical...

Tuesday 06 September 2022

Cantidad : 100000 - Precio : 5-500

Amain can offer you hotel quality duvet and blanket. Never forget the original intention. Stick to the mission of changing the sleep environment. Bring a super five-star experience. Our company, which is a professional duvet china maker, mainly produces and sells hotel bedding, hotel...