CERAMICS - 2899 Anuncios

Viernes 15 marzo 2024

Precio : 0.1~1000usd

XC-RF868 Fixed Reader Invengo's XC-RF868 loT Smart Reader adopts excellent architecture design and powerful reading and writing algorithm. It equips with Impinj R2000 chip and supports 6-channel RF ports. The reader is available to match various specifications of antennas and has...

Jueves 14 marzo 2024

Heat transfer films for solvent-based PU inks are matte and super matte finished with a cold peel. One or two sides are printable. The backside does anti-static coating, which has good performance on the garment. What Is the Difference: Eco Solvent Vs DTF Transfer Film? Eco solvent...

Miércoles 13 marzo 2024

Precio : 1-15USD

WALKSON, as a reliable mill liners manufacturers, can provide a wide range of wear resistant products for mineral processing industry, such as rod mill liners, grinding mill liners, ball mill shell liners and rubber mill liners; our main products include: SAG mill liner AG mill liner...

Miércoles 13 marzo 2024

Cantidad : 2-10sets - Precio : 2000000-50000000

Shanghai RUIYUAN printing equipment Co., Ltd provides complete printing and coating lines in the most varied configurations, especially for metal printing or metal coating or for a combination for the two, with UV drying or drying oven with industrial air purification systems, for...

Martes 12 marzo 2024

Cantidad : 10,000+ - Precio : $0.1 - $1,000

EDM Machining Service Electrical discharge machining, sometimes referred to as spark machining, spark eroding, die sinking, wire burning, or wire erosion, is a metal production technique that uses electrical discharges to carve out the required shape. The CNC EDM service is provided...

Martes 12 marzo 2024

PEEK Non-standard Parts PEEK material is a new type of semi-crystalline aromatic plastic engineering plastics, with extremely good physical and mechanical properties, in many special areas can replace metals, ceramics and other traditional materials, in reducing the quality, improving...

Sábado 09 marzo 2024

MP-C1 chenille mop pad chooses spunlaced non-woven fabric mop material, more water absorption.The double-sided reusable microfiber mop cover, with chenille on one side and coral fleece on the other, is still made of microfiber. Different appearance among chenille mop pad gives you...

Sábado 09 marzo 2024

There is no more effective and efficient way to clean hard ground than using Merrell cleaning floor with microfiber cloth. Gone are the days of dragging mop buckets, wringers, and bulky, inefficient traditional mops. Just bring enough clean microfiber pads for mop to complete the task...

Sábado 09 marzo 2024

Life is busy, and there is little time to clean the family hygiene? Work with MERRELL, one of the professional wet mop manufacturers , to solve small and large family problems, make cleaning easy and efficient. From 360°rotating mop to our double-sided spray mop and microfiber pad mop...

Viernes 08 marzo 2024

Magnet assembly incorporates magnet alloy and non-magnet material, usually creating much more magnetic strength than using magnets alone, and achieving certain functional effects which magnets cannot perform independently. Various kinds of magnetic assemblies can be designed and customized...

Jueves 07 marzo 2024

Cantidad : 10000 - Precio : 1~10

MTP/MPO Adapters can accurately connect two connectors and reduce connection loss, mainly used for fiber optic cable to fiber optic cable or fiber optic cable to equipment connection. For high-quality MTP/china mpo adapter that ensure accurate connections and minimal loss, it is...

Jueves 07 marzo 2024

Decorative Tableware Company, Tableware Factory JANMAR DECOR tableware in china is any dish or dishware used for setting a table, serving food, and dining. It includes cutlery, glassware, serving dishes, and other items. Custom Decorative Tableware Accessories with Competitive Wholesale Price...

Jueves 07 marzo 2024

Table Decoration Suppliers Check out Janmart décor tabletop ornaments selection for the very best in unique or custom, handmade pieces from our shops. Customize a tabletop china centerpiece that can stand on its own! We collect all kinds of table Ornaments here, including scented candles...

Miércoles 06 marzo 2024

Ceramic Ring Magnets D74xd40x15mm The big ferrite ring magnet has dimension of OD74 x ID40 x 15mm thickness, it is magnetized through thickness,with magnetic poles on flat surfaces. Material: Hard Ferrite - Y30BH Dimension: O.D74 x I.D40 x 15mm Thickness Magnetization Direction: Through...

Miércoles 06 marzo 2024

What Is Ceramic Magnet? Ceramic (Ferrite) Magnet Is the Cheapest Industry Magnets Due to relatively low-cost raw materials and an uncomplicated production process, permanent ceramic ferrite magnets are considered the most cost-effective industrial magnet with the highest output...

Miércoles 06 marzo 2024

Round Disc Shaped Ceramic Magnets The ceramic disk magnets made of iron oxide and strontium carbonate are ferrite magnet, also known as a ceramic magnet. Ceramic magnet discs are a part of the permanent magnet family, and known as the lowest cost, hard magnets available today. Round...

Miércoles 06 marzo 2024

Big Ceramic(Ferrite) Block Magnets 3"X2"X1"(76.2x50.8x25.4mm) All the big ceramic rectangular magnets 3"X2"X1"(76.2x50.8x25.4mm) are made of high grade hard ferrite material-C8, they are supplied with high quality and cheaper prices. Technical Date: Material: Hard Ferrite-C8 Gauss Rating...

Martes 05 marzo 2024

Micro machining is a type of manufacturing technique used to produce small and precise parts, components, and structures. This manufacturing process involves using advanced technology to cut and shape materials at a microscopic level. Micro machining typically uses sophisticated CNC...

Viernes 01 marzo 2024

Cantidad : 700 tons/y - Precio : $4-10/kg

As one of the professional PTFE products manufacturers, Jiangsu Xinrui Plastic Technology specializes in manufacturing polytetrafluoroethylene products, including tubes, sheets, rods, gaskets, and film. These PTFE products have excellent chemical and heat resistance, low friction...

Viernes 01 marzo 2024

Cantidad : 700 tons/y - Precio : $4-10/kg

PTFE Molded Tube PTFE rods and tubes are sintered with PTFE suspension resin after moulding or hydraulic pressing, or extruded with PTFE presintered disperse resin by plunger. PTFE is commonly known as the king of plastics. The PTFE product has many excellent features. As a professional...

Jueves 29 febrero 2024

Airline Ceramic Tableware Set Specifications Title： Inflight Fine China Ceramic Tableware Set Product Name： Ceramic tableware Application: First Class, Business Class Material： Porcelain, ceramic, bone china, new bone china, stoneware Size： Customized Weight: As per request Color...

Miércoles 28 febrero 2024

HT (260℃) High Temperature Fiber Optic Connector Sensor High temperature resistant connector uses special fiber with high temperature survivable coating and special epoxy, which makes it resistant for 260°C and reflowable as well. HT(260℃）Connector Feature Fiber Type: SM, MM, PM,...)

Viernes 23 febrero 2024

Cantidad : 5000-40,00 - Precio : USD10-USD2,000/pc

Henan E-Grind Abrasives Co., Ltd can offer the semiconductor industry cutting-edge dicing blades & grinding wheels of the utmost quality. Diamond tools play a significant part in the production of semiconductors from a wafer to a single chip. Dicing Blade & Grinding Wheels...

Viernes 23 febrero 2024

Cantidad : 5000-40,00 - Precio : USD10-USD2,000/pc

Rotary dresser grinding wheel with Silicon Carbide, Aluminum Oxide, Diamond, or CBN as grinding media lose their profile accuracy and cutting capacity after extended use. In order to restore the same, the grinding wheels have to be subjected to a dressing process. E-Grind provides...

Viernes 23 febrero 2024

Cantidad : 5000-40,00 - Precio : USD10-USD2,000/pc

E-Grind Abrasives developed diamond blade cut off wheel/CBN cut off blade for grinder to achieve more efficient and precision cutting. Our general bond can be used for both wet cutting and dry cutting. E-Grind Diamond cut off wheel for grinder is for cutting carbide, alloy material...

Viernes 23 febrero 2024

Cantidad : 5000-40,00 - Precio : USD10-USD2,000/pc

As one of the reputable abrasive grinding wheel manufacturers, E-Grind provides different all types of grinding wheel and Cubic Boron Nitride (CBN) grinding wheels, which are widely used in the woodworking industry, tool making, bearing, gear, mold and die, automobile, aerospace,...

Viernes 23 febrero 2024

Cantidad : 100,000 se - Precio : 1000-3000rmb

JKCSOLAR street light is a split-type all in two china automatic solar street light developed and produced by our China LED automatic solar street light manufacturer, automatic solar street light factory, automatic solar street light company in 2020. Its small size, unique design...

Viernes 23 febrero 2024

Cantidad : 100000 - Precio : $2-$5

Kitchen Utensil Wholesale Our bulk kitchen utensils are made from food-grade utensils silicone material that gives you the full use of the best tools. Bohao's healthy silicone utensil set with holder can meet all your cooking needs, and each product has its own unique purpose. We...

Jueves 22 febrero 2024

White fused alumina powder is made of industrial alumina powder, which is smelted in an arc at a high temperature of over 2000 degrees and then cooled. It is suitable for the manufacture of ceramics, resin-bonded abrasive tools, grinding, polishing, sandblasting, precision casting etc...

Jueves 22 febrero 2024

Green silicon carbide crystals have high purity and hardness. You can find the wide applications of green silicon carbide powder in machining hard alloy, metal and non-metallic materials. For instance, materials with hard and brittle characteristics like copper, brass, aluminum, magnesium...