AEROSPACE - 1393 Anuncios

Jueves 11 enero 2024

Alnico Magnets Definition AlNiCo magnets, short for aluminum-nickel-cobalt magnets, are a type of permanent magnet known for their excellent temperature stability, high magnetic flux density, and strong resistance to demagnetization. They were one of the first commercially available...

Jueves 11 enero 2024

Wholesale Alnico block magnets are a type of permanent magnets, They are rectangular or square-shaped magnets with a strong magnetic field and are commonly used in a variety of industrial and commercial applications. These custom magnets china produced by custom magnet manufacturer...

Viernes 05 enero 2024

Eplus aluminum powder for 3d printing Aluminum is an ideal material for many industries, including aerospace and automotive. Eplus3D's aluminum powders include Alsi10Mg and AlSi7Mg. These powders have been tested for use on Eplus3D's metal 3D printers. Eplus3D also offers a wide range...

Viernes 05 enero 2024

As a material for brass CNC machined parts manufacturing, brass is an alloy of copper and zinc that has an aesthetically pleasing surface and excellent properties such as high strength, high hardness and strong chemical resistance as well as strong wear resistance. It is a relatively...

Viernes 05 enero 2024

YS Rapid is a one-stop shop for quick turn-around and cost effective precision mechanical parts and rapid prototyping parts manufacturing, from concept and design work, custom manufacturing to final delivery of goods to local and international clients. As a CNC machining parts company...

Viernes 05 enero 2024

Fast linear actuators offer rapid and precise linear motion with quick response times. Engineered with high-speed motors and advanced transmission systems, they are used in robotics, automation, and aerospace. These actuators enhance productivity, reduce cycle times, and deliver efficient...

Viernes 05 enero 2024

The DDTG-55Z high speed electric linear actuator is a high-performance solution designed for applications that demand rapid and precise linear motion. With its advanced design and high-speed motor, it offers quick response times and accelerated speeds while ensuring precision and accuracy...

Jueves 04 enero 2024

Viscous damper is a kind of damping device which is composed of high strength metal cylinder, piston, guide rod, sealing element and viscous damping fluid. When the cylinder and the piston move each other, a throttling damping force caused by the movement of the built-in viscous damping...

Miércoles 03 enero 2024

CNC (Computer Numerical Control) machining is a subtractive manufacturing process that uses computerized machine tools to make a custom-designed part. A computer uses programming codes to direct machine tools to chip at (subtract) a material. This is until the material forms the input...

Miércoles 03 enero 2024

Bushing in China, a high-quality mechanical component expertly designed to reduce friction, wear, and vibration. Crafted from robust, long-lasting materials, this versatile bushing offers exceptional performance in a wide range of applications. Enhance the efficiency and lifespan...

Miércoles 03 enero 2024

Copper and custom brass stamping parts are manufactured using a metal stamping process, shaping brass or copper sheets and coils by applying force through a die or mold. These components boast excellent thermal and electrical conductivity, corrosion resistance, and aesthetic appeal...

Miércoles 03 enero 2024

Bolts are essential mechanical components used in various industries for fastening and securing objects together. These threaded fasteners are typically made from steel, stainless steel, or other durable materials, providing strength and stability. Bolts come in various sizes and types...

Miércoles 03 enero 2024

PTFE machined parts are custom-made components manufactured from polytetrafluoroethylene material. These parts are created through machining processes that involve cutting, drilling, and shaping PTFE plastic to meet specific design requirements. Machined PTFE parts offer outstanding...

Miércoles 03 enero 2024

Polytetrafluoroethylene film is made of PTFE resin by molding, sintering, cooling into blank, then by turning, calendering. The ptfe thin film made by turning is a non-oriented film, which becomes a oriented film after calendering. The non-oriented film is semi-oriented film by calendering 1...

Miércoles 03 enero 2024

The process is to make PTFE thin-walled tube at a certain speed through a temperature of 270℃ ~ 280℃ continuous forward rotation mold. It has all the excellent performance of PTFE but also has the characteristics of flexural, mainly used for strong corrosion resistance and high temperature...

Viernes 29 diciembre 2023

A quiet, private, and comfortable acoustic work booth This is an innovative office space to improve employee productivity and happiness at work. Revolutionize your workspace Five Soundbox's office privacy pods are placed in open office 01# The safer acoustic work pods Made of recycled...

Viernes 29 diciembre 2023

This private space is perfect for small meetings or intimate conversations between two people. Plus, this soundproof coworking pods is designed to block out outside distractions, helping you stay focused and productive. Whether you're looking for a place to escape the hustle and bustle...

Viernes 29 diciembre 2023

Soundproof booth X-Large was designed for efficiency. Whether you're holding a brainstorming session or need to have a longer meeting, this room modern office privacy booth can accommodate up to eight people. You'll be able to communicate with ease and without any distractions in...

Jueves 28 diciembre 2023

Compression Molding PEEK PEEK has excellent corrosion resistance, radiation resistance, high-temperature resistance, low-temperature resistance, hydrolysis resistance and good electrical properties, can be used under high temperature, high pressure and high radiation and other harsh...

Jueves 28 diciembre 2023

Natural PEEK Plastic Applications PEEK polyetheretherketone raw material has excellent comprehensive properties and can replace traditional materials such as metals and ceramics in many special fields. PEEK has applications in mechanical engineering, aerospace, automotive industry...

Jueves 28 diciembre 2023

PEEK is a C-level insulating material, keeps excellent insulating properties under high temperature, high pressure, high humidity and other environments, has wave permeability, dimensional stability and self-lubrication, keeps lower dielectric dissipation factor under various frequencies...

Jueves 28 diciembre 2023

Aluminum Die Casting Mold When working at high or low temperatures, they also maintain good mechanical properties and have good corrosion resistance. properties and antioxidant properties. Die castings are widely used in construction, hardware, equipment, machine tools, ships, aerospace...

Jueves 28 diciembre 2023

6061 Aluminium Round Bar Aluminum Round bar ( Rod ) may be cold finished or extruded and Aluminum Round Bar (Rod) is availble in various alloys offering a range of weldability, corrosion resistance and machinability. High strength Aluminum Round Rod can be used in aerospace applications...

Viernes 15 diciembre 2023

Cantidad : 6sets - Precio : 1000000-6000000

The pipe x ray equipment for spiral steel is suitable for non-destructive testing of the quality of spiral steel pipe welds. The X ray radiography pipeline inspection equipment can quickly and efficiently detect defects such as pores, looseness, inclusions, and incomplete in spiral...

Sábado 09 diciembre 2023

Cantidad : 100sets

Temperature Altitude Chamber Model: YCTL-080 YCTL-150 YCTL-225 YCTL-408 YCTL-800 YCTL-1000 Main Parameters: Temperature range: 0℃/-20℃/-40℃/-70℃ ~ +150 Pressure range: RP~ 0.5Kpa Temperature fluctuation: +/- 0.5℃(normal pressure) Temperature uniformity: +/- 2℃(normal pressure) Description...

Sábado 09 diciembre 2023

Cantidad : 100sets

Coating Parts High Temperature Drying Oven Model: YPO-3155-120 Main Parameters: Temperature range: RT+25℃～120℃ Temperature fluctuation: ±0.3℃ Temperature uniformity: ±1％℃ Heat-up time: 15 min Description of Coating Parts High Temperature Oven Camera Precision ovens can provide a stable...

Sábado 09 diciembre 2023

BTL is proud to introduce our high temperature conductive paste. This paste is designed for high-temperature curing and ensures reliable electrical connections. It is an ideal solution for high-temperature bonding and sealing applications. It has excellent thermal conductivity and...

Sábado 09 diciembre 2023

The IP connector together with supported cable is applied to 4G,5G, Base Station remote radios, and fiber to the antenna transmission. Besides of that, T&S IP patch cord series has outstanding water and dustproof characteristic which is applied to rigorous environment like aerospace...

Miércoles 06 diciembre 2023

As one of the professional TFT touch screen manufacturers, Leadtek offerrs high quality TFT LCD displays for customer unique application requirement and we specialize in creating custom customized tft lcd for clients all over the world. We could provide 5 custom-made TFT LCD screen...

Martes 05 diciembre 2023

Cantidad : 20 sets/ye - Precio : 100,000-50 million

At TC Optics, we specialize in manufacturing custom glass optical domes of all kinds. We are capable of creating different sizes from 10mm to 124mm in Diameter. We are among the very few glass dome manufacturers in the world who possess this technology. Whether you need a glass dome...