THERMAL - 4422 Anuncios

Sábado 16 marzo 2024

Cantidad : 1-5000 set - Precio : USD 1,000~USD 50,000

Ulirvision offers a wide range of range of infrared lens for infrared thermal imaging camera. Below are our featured thermal infrared lens and key factors need to consider for choosing ir camera lens. Thermal Infrared Lens Manual Lens Focal Length (mm)F NumberAdapter DetectorField...

Sábado 16 marzo 2024

Cantidad : 1-5000 set - Precio : USD 1,000~USD 50,000

The thermal camera for human temperature measurement detects the infrared radiation emitted by human body and forms an image of the surface temperature distribution. The higher the temperature of the object, the greater the infrared radiation energy will be. The thermal imager obtains...

Sábado 16 marzo 2024

Cantidad : 1-5000 set - Precio : USD 1,000~USD 50,000

Overview of TC900PTZ Marine Thermal Night Vision Camera TC900PTZ is designed for maritime surveillance, featuring dual-channel with high IR resolution gyro stabilized thermal camera and CCD high-definition visible video camera, and able to adapt to the bad weather at sea. Features...

Sábado 16 marzo 2024

Cantidad : 1-5000 set - Precio : USD 1,000~USD 50,000

Thermal security camera system is widely used in areas where security and monitoring are required for timely detection of abnomal situations in order to prevent further damage. Below are two typical type of cameras for thermal surveillance and the importance of thermal imager for...

Sábado 16 marzo 2024

Cantidad : 1-5000 set - Precio : USD 1,000~USD 50,000

Hydrocarbon gas leak detection camera is an instrumentation tool for gas leakage detection. Below are two of our featured gas leak cameras. Optical Gas Imaging Cameras G330 It is able to detect & pinpoint the gas leaks location precisely. It is a multifunctional device for infrared...

Sábado 16 marzo 2024

Cantidad : 1-5000 set - Precio : USD 1,000~USD 50,000

Cooled core and uncooled core are different in many aspects, including the descriptions below. TC320MW/TC640MW TC320MW|TC640MW are mid-wave cooled thermal imaging cores with high-quality detectors which can be easily integrated into infrared systems that require extremely long distance...

Sábado 16 marzo 2024

Cantidad : 1-5000 set - Precio : USD 1,000~USD 50,000

Sepcification of Athermalized Lens Focal Length (mm) F Number Adapter Detector Field of View Rear Working Distance (mm) Interface Physical Dimension Working Temperature Coating Waterproof Rating Coating Athermalized Lens 9 1 640*480-17μm 72.8°*53.4° 4 M25*0.5...

Viernes 15 marzo 2024

Based on the principle of "early detection and early disposal", advance detection and early warning (extremely early detection) should be carried out for Lithium Battery thermal runaway in the Storage tank at the initial stage, and accurate multiple point spraying should be used to...

Viernes 15 marzo 2024

Fire Alarm for Energy Storage Power Station Energy storage power station with fire detection devices in real time collection and the surrounding area environment temperature, concentration of carbon monoxide, hydrogen concentration and the concentration of VOC and smoke concentration...

Jueves 14 marzo 2024

Medium or fine white adhesive powder to be applied to form an adhesive layer after the DTF printing process. Specially formulated thermoplastic polyurethane (TPU) hot melt adhesive powder, also referred to as hot melt glue powder adhesive powder. It can be used for personalized T-shirts...

Jueves 14 marzo 2024

Water-based heat transfer paper for water based Ink is our popular products. With matte and super matte finishes with cold peel or hot peel, which are free of chrome, formaldehyde and phtalate. Water based heat transfers are a vibrant, soft, and lightweight alternative to traditional...

Jueves 14 marzo 2024

Heat transfer films for solvent-based PU inks are matte and super matte finished with a cold peel. One or two sides are printable. The backside does anti-static coating, which has good performance on the garment. What Is the Difference: Eco Solvent Vs DTF Transfer Film? Eco solvent...

Jueves 14 marzo 2024

Precio : 50~1000 USD

DoHP100 Portable Hardness Tester is a small, light and portable tester. And the leeb portable hardness tester is most suitable for testing of heavy, big or outdoor metal parts. The digital leeb hardness tester conforms to the Standard ASTM A956-02 & DIN 50156. This type of digital...

Jueves 14 marzo 2024

Gerchamp BMS for lead-acid battery is the high-end product with complete functions and complete configuration. This lead acid battery management system has applied a number of patented technologies. The BMS battery management system can monitor battery leakage, battery internal open...

Jueves 14 marzo 2024

As one of the top battery monitoring system manufacturers, Gerchamp provides data center battery monitoring System (BMS) which is an intelligent BMS battery system that can monitor and control the battery charge and discharge. This BMS battery monitoring system can monitor battery parameters...

Jueves 14 marzo 2024

Purpose of battery management system BMS battery management system can monitor and regulate the process and state of battery charging and discharging. 7s battery management system continuously monitors battery characteristics, including battery type, voltage, internal temperature...

Miércoles 13 marzo 2024

Cantidad : 2-10sets - Precio : 2000000-50000000

CTP (Computer To Plate) refers To Computer direct Plate making, which uses laser scanning To record digital page information on the Plate, and then obtains the Plate through appropriate post-processing. According to the different imaging principles, computer to plate printing machine...

Miércoles 13 marzo 2024

Cantidad : 2-10sets - Precio : 2000000-50000000

Shanghai RUIYUAN printing equipment Co., Ltd provides complete printing and coating lines in the most varied configurations, especially for metal printing or metal coating or for a combination for the two, with UV drying or drying oven with industrial air purification systems, for...

Martes 12 marzo 2024

Precio : USD1500 to USD3000

Antioxidants as food preservatives is a kind of chemical substance, which can delay or inhibit the process of polymer oxidation when it only exists in a small amount in the polymer system, thus preventing the aging of polymer and extending its service life. Functions of sodium erythorbate...

Martes 12 marzo 2024

PEEK Non-standard Parts PEEK material is a new type of semi-crystalline aromatic plastic engineering plastics, with extremely good physical and mechanical properties, in many special areas can replace metals, ceramics and other traditional materials, in reducing the quality, improving...

Martes 12 marzo 2024

Copper Precision Spare Parts T1, T2 copper is mainly used as conductive, heat-conducting and corrosion-resistant components, such as wires, cables, conductive screws, shells and various conduits, etc. T3 copper is mainly used as structural materials, such as the production of electrical switches...

Martes 12 marzo 2024

Xin Pin is an ISO9001 certificated manufacturer that we can be trusted to handle the aerospace & UAV industries. With our experience, we have a good command of each step of production to undertake your aerospace project production. Aerospace is a high-tech industry, which needs...

Jueves 07 marzo 2024

NCM102Ah 1P6S VDA Module 355 VDA frame welding lithium battery module. High-quality standard of production and performance meeting supply requirements of passenger vehicles. Uninterrupted supply is guaranteed by stable mass production. Continuously improved energy density through...

Miércoles 06 marzo 2024

Cantidad : 10000pcs/p - Precio : 20USD--

CNC Turning CNC Turning is also called cnc lathing. The high quality China CNC turning is a manufacturing process in which bars of workpiece are held in place and rotated by the main spindle while a cutting tool is fed to cut the material to create the shape and size as per the drawing's...

Miércoles 06 marzo 2024

Cantidad : 10000pcs/p - Precio : 20USD--

CNC Machining POM POM (also known as polyoxymethylene) is a synthetic thermoplastic polymer. It has a good balance between mechanical properties and cost, and is widely used in the manufacture of gears and bearings. POM has excellent wear resistance, low friction coefficient, and...

Miércoles 06 marzo 2024

Cantidad : 10000pcs/p - Precio : 20USD--

CNC Machining PEEK YS RAPID is a professional peek cnc machining manufacturer, peek cnc machining supplier in China. With more than ten years of CNC machining experience, we provide high-quality PEEK material machining services including glass filled china peek cnc machining service...

Martes 05 marzo 2024

Titanium tube stock is a type of titanium product that is used across various applications, including the aerospace and medical industries. It is made by melting and casting titanium sponge or scrap, then rolled and welded into tubes. Titanium tubes are known for their high strength...

Martes 05 marzo 2024

Titanium seamless tube is a tubular metal product made of pure titanium or a titanium alloy. Seamless titanium alloy pipe is produced using a seamless process that eliminates the need for welding, creating a strong, durable hollow cylinder with excellent corrosion resistance. Titanium...

Martes 05 marzo 2024

Cantidad : 1000TONS/M - Precio : $5-100/kg

NICKEL ALLOY STEEL PIPE /TUBE Nickel alloy is one of the most useful materials for manufacturing technically superior nickel alloy pipe for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloy is exceptionally corrosion-resistant...

Martes 05 marzo 2024

Cantidad : 1000TONS/M - Precio : $5-100/kg

COPPER ALLOY STEEL TUBE Copper alloy is an alloy composed of pure copper as the matrix and one or several other elements added. Pure copper is purple-red, also known as copper. The density of pure copper is 8.96, the melting point is 1083℃. The copper alloy tube/pipe made with copper...