100B SPLIT CUTTING HEAD - 13778 Anuncios

Miércoles 22 febrero 2023

This is the Precision CNC Turning Parts recently produced by us. It meets the requirements of ISO9001: 2008. Specification: 46mm*76mm Raw material: AL6061-T6 Surface Treatment: clear anodizing Finish: anodizing Specifications of Precision CNC Turning Parts Type: Broaching, Drilling...

Miércoles 22 febrero 2023

Pump with a wide range of mechanical seals, different models, but there are five major leaks: Seal between sleeve and shaft; Seal between movable ring and shaft sleeve; Dynamic and static ring seal; The seal between the static ring and the static ring seat; Seal between the end cap...

Miércoles 22 febrero 2023

The surgical stapler includes the shell, the center rod, and the push tube. A center rod is set in the push tube. On the front end of the center, the rod is equipped with a nail cover. The rear end is connected to the adjusting knob at the rear of the shell through the screw, and...

Miércoles 22 febrero 2023

Nowadays, medical technology is constantly advancing, even the suturing of wounds is helped by the machine. Suturing and stapling instruments sare particularly frequent in some gastrointestinal surgeries. But a lot of people say it was hand-stitched before, very doubt whether the...

Miércoles 22 febrero 2023

For patients that requires surgeries, we constantly seek ways to alleviate discomfort, reduce anesthesia time, and speed up recovery. Minimally invasive instruments can be used in many minimally invasive procedures, and we are accepting the advantages of this cutting-edge technology...

Miércoles 22 febrero 2023

Cantidad : 100 sets / - Precio : USD2206-USD73529

On 6th Jan, 2023, Friday, Raloyal team held the annual meeting. All peers attended, include the manufacture department, R&D department, purchasing department, sales department, HR and warehousing department, etc. On the meeting, each department representative made a speech. The...

Miércoles 22 febrero 2023

Cantidad : 100 sets / - Precio : USD2206-USD73529

This Twin Head High Speed Die Cutting Machine is ideal for all kind of label, characterized by high precision and high sensitivity. Application This die cutting machine is ideal for all kinds of labels, characterized by high precision and high sensitivity. Application industry: End Use...

Miércoles 22 febrero 2023

Cantidad : 100 sets / - Precio : USD2206-USD73529

It is suitable for printing paper, paper board, paper cup, high-grade self-adhesive label and so on. Application It is suitable for printing high-grade self-adhesive label, release Liner Label, food label, bottle label, and etc. Application industry: On the basis of the end users/applications...

Miércoles 22 febrero 2023

Cantidad : 100 sets / - Precio : USD2206-USD73529

We produce auto slitting machine with functions of ultrasonic rectification and automatic detection and rectification, High accurate magnetic powder clutch is equipped, good control of unwinding and rewinding tension. Features of HC-650 Automatic coil slitting machine USE of HC-650...

Miércoles 22 febrero 2023

Cantidad : 100 sets / - Precio : USD2206-USD73529

This label slitting rewinding machine is an ideal machine for the adhesive label, paper roll slitting. Application This rotary die cutting machines with longitudinal cutting is the most ideal machine for slitting blank label, Wave Shape Price Labels and etc. The turret slitting label...

Martes 21 febrero 2023

Cantidad : 23000000 - Precio : 0.5-3RMB

Continuous Roll Sandpaper Riken RMC CP57M adopts the special backing paper with good flexibility and smooth surface. The products could be converted in to narrow belt and hand pressure belt. Advantages of Continuous Roll Sandpaper Sharp and high-quality silicon carbide grain contribute...

Martes 21 febrero 2023

ETCN is specialized in offering custom cnc machining services. As the technical cnc machining service supplier, we have various types of CNC processing equipment and testing equipment to help us control the quality of cnc machining metal. We can manufacture parts of various materials...

Martes 21 febrero 2023

After CNC milling or CNC turning forming, the surface roughness and behavior tolerance requirements of products are completed by CNC grinding, and the maximum dimension tolerance can reach ± 0.001mm. CNC Grinding Capabilities 1. The technology of cnc china machining is combined with...

Martes 21 febrero 2023

CNC boring is used for the shaft sleeve in the transmission shaft of large equipment, and the tolerance of the bearing position is +0.03mm. After welding the accessories, use CNC horizontal boring and milling equipment to process both sides with a concentricity of 0.05mm. CNC Boring...

Martes 21 febrero 2023

ETCN offers a quality CNC me metal folding/bending press after laser cutting which is used for the base of the compressor motor. Different types of sheet metal bending are available to our clients and meet their satisfaction, like bending stainless steel plate, bending galvanized sheet metal...

Martes 21 febrero 2023

Precio : 100USD

As life quality is valued more and more, it's necessary to have a dust mite removal machine in your house. In our daily life, the mattresses and sofas we use to lie on are full of bacteria and mites in places invisible to the naked eye, which is very perplexing to the health of you...

Sábado 18 febrero 2023

Precio : 100USD

TM-Sure Scissors Type Ultrasonic Scalpel 9cm BBT medical harmonic scissors can be applied to the same Generator(55.5Khz). It vibrates at 55.5Khz, has best performance for thyroid and breast operation. Its curved tip to enhance the grasp and the ability to access narrow and deep spaces...

Sábado 18 febrero 2023

Precio : 100USD

BBT Medical Ultrasonic Transducer Wuhan BBT Medical is a professional ultrasonic transducer supplier and ultrasound transducer manufacturer. Our homemade ultrasonic transducer is a device that converts electrical energy into mechanical energy, usually made of piezoelectric ceramic sheets...

Sábado 18 febrero 2023

Precio : 100USD

BBT Medical Ultrasonic Harmonic Scalpel 45cm What is a BBT Medical ultrasonic harmonic scalpel 45mm? It is a curved blade ultrasonic scalpel. In matching with the ultrasonic surgical systems, it is used for cutting, dissection, coagulation in general surgery, laparoscopic surgery...

Sábado 18 febrero 2023

Precio : 100USD

BBT Medical Harmonic Knife 36cm With a curved ultrasonic cutting blade, BBT Medical harmonic knife 36cm is compatible with BBT Medical ultrasonic surgical Generator 55.5Khz, Also other mark Generator in the market. The curved head structure design increases the effective anatomical...

Sábado 18 febrero 2023

Precio : 100USD

BBT Medical Harmonic Scalpel BBT Medical ultrasonic scalpels are mainly used for soft tissue cutting and coagulate blood vessels less than 5mm in laparoscopic surgery. Available in 4 shaft lengths 45cm,36cm,23cm and 14cm for you choose. Superior to electrosurgery in that it can cut...

Sábado 18 febrero 2023

Precio : 100USD

BBT Ultrasonic Generator As a one of the most professional ultrasonic generator suppliers, BBT ultrasonic frequency generator 55.5Khz provides an excitation signal and a high-frequency AC power source to drive the medical ultrasonic transducer. It offers 3~5 level power adjustment...

Sábado 18 febrero 2023

Precio : 100USD

BBT Ultrasonic Surgery Systems This system is composed of the generator, transducer, and scalpel. And the generator converts electrical energy into mechanical energy through the piezoelectric ceramic sheet in the handle, so that the jaw oscillates at 55.5KHz, and the vibration amplitude...

Sábado 18 febrero 2023

Wooden Carbide Brazing In the wooden cutters making process, it is necessary to combine the cutter head and the cutter body. Most of the time, manufacturers will use brazing to achieve the purpose of combination. As a mature induction heating machine manufacturer in China, JKZ has...

Sábado 18 febrero 2023

What is EMT pipe made of? There are galvanized and pipe material Q235, and the outside surface is galvanized. 1. Galvanized pipe, also known as galvanized steel pipe, is divided into two kinds: hot-dip galvanized and electro galvanized. The hot-dip galvanized layer thick, with the...

Sábado 18 febrero 2023

Cantidad : 800,000pcs - Precio : USD3-USD200

Wholesale LCD Display Module Kingtech has been specializing in small and middle-size TFT LCD displays since 2003. Those displays are widely used in medical devices, industrial types of equipment, smart home solutions, handheld devices such as logistic devices, POS, test meters, telecoms...

Sábado 18 febrero 2023

The globe valve, also called the gate, is one of the most widely used valves. The reason why it is popular is that the friction between the sealing surfaces is small during the opening and closing process, it is more durable, easy to manufacture, the opening height of it is not large...

Sábado 18 febrero 2023

Reasons for closing the discharge valve The starting current can be reduced by closing the discharge control valve. The current will be very high when any motor starts. When the pump is started with an open discharge valve, the discharge head will have greater resistance to the pump...

Sábado 18 febrero 2023

Precio : USD300-500

Project Name: Split Solar Street Light Project for Roadway in South Africa Date: May 2017 Project type: Municipal solar lighting project Project Site: South Africa Quantity and specific configuration: 660pcs 100W split solar roadway lights with 6 meter poles Description: This project...

Sábado 18 febrero 2023

Precio : USD300-500

T8 integrated led tube light uses a white LED chip as the light source. The shell of our LED series T8 tube is acrylic/aluminum alloy. As the outer cover is made of a PC tube, Anern's led series split T8 tube holds the high-temperature resistance up to 135 degrees. Our T8 integrated...