CHARACTERISTICS - 8323 Anuncios

Jueves 16 junio 2022

Precio : 1-10usd

Performance Characteristics of low esr cap Low internal resistance series supercaps. This product uses a new internal design and advanced materials to ensure low ESR. Typical Application of Low cap esr RAM, Detonator, car recorder, smart meter, vacuum switch, digital camera, motor drive...

Miércoles 15 junio 2022

Wine Separation and Extraction System Ideal Choice for wineries And Product Overview JS-WSU-M2 series products are specially designed to meet the brewing needs of wineries. Thisseparation and extraction system is different from the traditional pot distillation and extraction method...

Miércoles 15 junio 2022

Ceramic Nanofiltration membrane is relatively recent membrane filtration system, with the purpose of softening and removal of disinfection by-product precursors such as natural organic matter and synthetic organic matter. More ultrafiltration membrane system details here! CHARACTERISTICS...

Miércoles 15 junio 2022

Product characteristics Materials: F150 Application: Used for scales Adhesive: 3M467 Transparent Red window in the graphic overlay As a professional membrane switches supplier, Komkey provides overlay pcb, membrane overlay, pcb overlay, membrane pcb, custom graphic overlay, custom...

Miércoles 15 junio 2022

Product characteristics 1. Metal dome Shape: Four-Leg Metal domes, Triangle metal domes, Round metal domes 2. Metal dome force: 180g, 220g, 240g, 350g, 400g, 3. Metal dome with good tactile 4. Metal dome materials: Stainless, Nickel, Golden As one of the most professional membrane...

Miércoles 15 junio 2022

Product characteristics Materials: UV150 Application: Outdoor application, UV resistant Adhesive: 3M467 Rim embossing for keys As one of the most professional membrane switch keypad suppliers, Komkey provides smart switch overlay, smart overlay, overlay switch, switch overlay, custom...

Miércoles 15 junio 2022

Product characteristics 1. Silicone rubber materials: Epoxy encapsulation, Multi-Hardness 2. Cost-effective 3. Surface: texture, metallic colors 4. Silicone key height： 15mm or more 5. Can be molded with conductive pills, assembled with polyester or metal dome arrays for electrical...

Miércoles 15 junio 2022

Cantidad : 300m-350m - Precio : 100USD

Rectangular splines are mostly six splines. This type of spline is better than a single key and can withstand greater torque. It is convenient for various screw elements to be mounted on the mandrel. The mandrel material is also a 40CrNiMoA forging of alloy structural steel. Quench...

Miércoles 15 junio 2022

Cantidad : 300m-350m - Precio : 100USD

Side Feeder Elements This side extruder feed screw is to help the bulk materials that are fed into the extrude. This extruder feed screw features a smooth surface finish and pocket-to-pocket accuracy for flawless container transfer without scuffing, damage. Feed Screw Manufacturer...

Miércoles 15 junio 2022

Cantidad : 300m-350m - Precio : 100USD

Screw Shaft Manufacturer Screw Shaft Diameter: φ20 mm ~φ300 mm Screw Shaft Properties: Wear-resisting, Corrode-resisting, Durable Extruder shaft is key to pow transmission and ensure the extruder running smoothly. That's the reason why we do more tests on individual combination...

Miércoles 15 junio 2022

The knife holder with disinfection function, through high-temperature drying of residual water droplets, all-round ultraviolet sterilization, so that the knives/forks/spoons & chopsticks that come into contact with food every day are kept dry and sterile, mildew and dirty, and...

Miércoles 15 junio 2022

Cantidad : 300m-350m - Precio : 100USD

Kneading Screw Elements Manufacturer Kneading Element Diameter: φ20 mm ~φ300 mm Kneading block Properties: Wear-resisting, Corrode-resisting, Durable The conveying screw element is self-sweeping type, open longitudinally and closed laterally, which has strong conveying effect. Short...

Miércoles 15 junio 2022

Cantidad : 300m-350m - Precio : 100USD

Good force pull on the material ,meanwhile the material can be fully distributed evenly without shearing, so the temperature of the material could be cooling down Technical Details of Mixing Rotor Brand：LESUN Model：φ20 ~ φ300 Material：38CrMoALA/ W6Mo5Cr4V2/ HIP Properties: Wear-resisting...

Miércoles 15 junio 2022

Cantidad : 300m-350m - Precio : 100USD

The metric spline shaft stock is the form of mandrel splines used by all the twin screw extruders over the world. The standards of the spline are Chinese GB standard, German DIN5480 (or DIN5482) and Japanese standard. The design of this spline can make the groove depth of the screw larger...

Miércoles 15 junio 2022

Precio : 0.1-100USD

XLPE insulated 3 cores power cable is normally used in power transmission and distribution systems. The three core cable wires are referred to IEC60502 CU/XLPE/PVC 0.6/1KV. The circular conductor is applied for the size below 16mm² and the shaped conductor is applied for the size...

Miércoles 15 junio 2022

Precio : 0.1-100USD

The structure of 3 cores+1 earth cable wire is designed for application where the earth wires are required according to customer requirements. This 3 core and earth cable/wire ais often referred 3 cores +1 cables XLPE insulated with voltage 0.6/1000v or IEC 60502 3 core and earth cable...

Miércoles 15 junio 2022

Precio : 0.1-100USD

XLPE insulated 2 core power cable are normally used in power transmission and distribution systems. The 2 core XLPE cable is referred to as IEC60502 CU/XLPE/PVC 0.6/1KV. The circular conductor is applied for the size below 16mm² and the shaped conductor is applied for the size above...

Martes 14 junio 2022

Cantidad : 150000 ton - Precio : USD 2500/T to USD 35

Description of Direct Reduced Iron (DRI Steel) Direct reduced iron (DRI), also called sponge iron, is produced from the direct reduction of iron ore (in the form of lumps, pellets, or fines) to iron by a reducing gas or elemental carbon produced from natural gas or coal. Many ores...

Martes 14 junio 2022

Goodwe XS Series 0.7 – 3 kW I 1 MPPT I Single Phase The extremely compact goodwe xs 3000 model from GoodWe is an ultra-small residential solar inverter specifically designed to bring comfort and quiet operation as well as high efficiency to households. Its capacity ranges from 0...

Martes 14 junio 2022

Plant breeding is the science of changing the traits of plants in order to produce the desired characteristics. It has been used to improve the quality of nutrition in products for humans and animals. Grow Lights For Seedlings Vine plants, similar to cucumbers and tomatoes, are...

Martes 14 junio 2022

Power distribution transformer of our manufacturer is independently designed according to characteristics of the grid in urban and rural of China. Its performance indices are superior over GB/T6451 Specification“Three-phase oil-immersed power transformers technical parameters and requirements”...

Martes 14 junio 2022

As one of the professional oil immersed transformer manufacturers, our oil immersed power transformer is specially developed and designed based on the advanced technology abroad for rough mountainous topography and transportation difficulties to meet the requirement of China oil type...

Martes 14 junio 2022

Shanxi Hanzhong is one of the leading grounding earthing transformer suppliers in China. Grounding earthing transformer manufacturing with advanced equipment and experience have the characteristics of low loss, low noise, strong protection for lightning and short-circuit resistance...

Martes 14 junio 2022

Textile finishing is the process of finishing agent use on the fabric, which can change the surface properties and give special functions to the fabric. For example, water and oil repellent fabric finishing is to use a low surface tension finishing agent to process the fabric, in...

Martes 14 junio 2022

Dyeing auxiliaries are fine chemical products in the textile printing and dyeing industry applications. Dyeing agent is an important type of textile printing and dyeing auxiliaries, generally according to the classification of dyes, to name different types of dyeing agents. Chemical...

Martes 14 junio 2022

Application field: shield machine industry Details of A4VSO500EO2/30R-PPH25K43+ A4FO500/30R-PZH25N00 Product introduction: ● Heavy-duty full-through shaft large-displacement series pump to achieve high-speed function ● Increase production speed and reduce costs ● High reliability...

Martes 14 junio 2022

Application areas: high speed and high-reliability applications such as building materials equipment, steel metallurgy, hydraulic systems, etc. Details of A4VSO355LR2G/30R-PPB13N00 Product introduction: Specially designed for open circuit hydraulic drive, remote control. The flow...

Martes 14 junio 2022

Overmolding mold is made of overmolding injection molding process which is a special injection molding process that can combine various materials into a single part. Through mechanical and/or chemical bonding of two plastic materials, the overmolding injection molding process can...

Martes 14 junio 2022

We provide custom made plastic parts-Sliders, inserts, lifters, blocks, ejector pins, and other mold components for our worldwide clients in 3 days via DHL or TNT. We are able to manufacture custom made plastic parts(Mold slider, lifters, Mold inserts, Core and cavity, blocks, ejector...)

Martes 14 junio 2022

Packson provides our customers a various CNC machining services to our customers, including milling, turning, grinding, drilling and more. Our teams are able to manufacture metal machining parts via our precision manufacturing machine such as 3,4, and 5 axis CNC machining centers...