PLASTICS - 17357 Anuncios

Martes 31 enero 2023

Cantidad : 130000 pcs - Precio : $0.02~$0.40 per piec

The thread length of the long cable gland is 15mm, which is suitable for relatively thick distribution boxes or electrical panels. Our long thread cable glands is made of PA66 material and can be waterproof and dustproof. As one of the most professional nylon cable ties manufacturers...

Martes 31 enero 2023

Cantidad : 130000 pcs - Precio : $0.02~$0.40 per piec

Saichuang is one of the plastic cable gland manufacturers, whose plastic cable glands provide a safe and reliable solution for cable entries. The connection can be very smooth and closely with double-thread & O-ring groove. The claws and seals of some long cable gland, sealing...

Martes 31 enero 2023

Cantidad : 130000 pcs - Precio : $0.02~$0.40 per piec

Nylon cable zip ties or nylon tie wrap, also known as hose ties, or nylon zip ties, are a type of fasteners, for holding items together, primarily electric cables or wires. Normally it can test by hand. Nylon tie wraps with bad quality are easy to crack. Saichuang has been a professional...

Lunes 30 enero 2023

Cantidad : 100K pcs / - Precio : 0.2-5USD/PCS

24 years experience in exercise mats manufacturing (established in 1997). Patents & certificates: meet ISO20957 standard, over 40 patents (Utility Model Patents & Appearance Design Patents). All products are self-designed to provide a professional movement angle, which is...

Lunes 30 enero 2023

The intelligent lightning surge counter lightning flash counter is designed and manufactured in accordance with IEC61643-21 EN61643-11: 2012, YD5075-98 SPD test requirements. lightning event counter mainly collects SPD damage status and damage degree, air switch trip status, SPD false grounding...

Lunes 30 enero 2023

The continuous-slot well screen is widely used throughout the world for water, oil, and gas wells, and is the dominant screen type used in the water well industry. SAIGAO GROUP Continuous-Slot Well Screen is made by winding cold-rolled wire, approximately triangular in cross section...

Lunes 30 enero 2023

SAIGAO GROUP offers a full range of valves for drilling and production operations. Gate valves are designed and manufactured in accordance with API 6A latest edition PSL 1-4 while the robust, simple and reliable gate and seat design promotes ease of service with in-line maintenance...

Lunes 30 enero 2023

Buy something is a necessary act of our daily life. Using environmentally friendly shopping bags is everyone's responsibility. The long-term use of plastic shopping bags has already caused irreparable harm to the environment because they are non-biodegradable and disposable. It's...

Lunes 30 enero 2023

Material: sus/aluminum/iron Surface treatment: powder coating Process: stamping Precision metal stamping makes for the inside parts of the electronic enclosure Application: for electronic parts Tolerance: 0.1mm Packaging Details 1. Custom plywood crate or box for heavy sheet metal parts...

Lunes 30 enero 2023

Material: Carbon Steel/Stainless Steel/aluminum Surface treatment: Paint, powder coat, polish, silk-screen printing, anodize, electronic plate, sandblast, translucent surface, brush, rubber oil, ect. Process: Laser cutting,CNC bending,Welding,Surface Treament and assembly Payment term...

Lunes 30 enero 2023

cnc horizontal turning centers parts can automatically finish four sides milling, boring, drilling, expanding, reaming, tapping, and other multicoated processes after one clamping. Talk to our engineers, you will find the best solution. View Similar Models Features of cnc horizontal...

Lunes 30 enero 2023

Cantidad : 1000Kgs - Precio : USD1~2000/Kg

SiSiB® PC4600 is an organic functional coupling agent, newly developed as an adhesion promoter and reinforcing agents. Its acryloxy group is significantly more reactive than the corresponding methacryloxy group. SiSiB® PC4600 acyl silane is equal to Dow's AY43-310M, ShinEtsu's KBM-5103...

Lunes 30 enero 2023

Cantidad : 1000Kgs - Precio : USD1~2000/Kg

SiSiB® PC4300 is a methacryl-functional silane; it is a clear, light and heat sensitive liquid with a faintly sweet odour. It is equal to Dow's Z-6033, ShinEtsu's KBM-502. SiSiB® PC4300 is used as adhesion promoter at organic/inorgainc interfaces, as surface modifier (e.g. imparting...)

Domingo 29 enero 2023

Cantidad : 500000 Pie - Precio : 0.4-0.5USD

You won't hear any noise when moving the drawer slide due to the low-noise design of ROEASY, a professional Chinese drawer slide manufacturer. That's why ROEASY drawer slide is especially suitable for high-quality furniture. Only through excellent functions can you feel this superb technology...

Domingo 29 enero 2023

Micro crystal wax is a refined synthetic wax with similar microcrystalline properties. As an experienced micro crystalline wax manufacturer, we provide micro crystal wax with the characteristics of good gloss, high melting point, and light color. The structure of micro crystal wax...

Domingo 29 enero 2023

The paraffin wax in china is fully refined wax, and the content of fused-ring aromatic hydrocarbons is low. The fully refined paraffin wax has good chemical stability, light stability and good thermal stability. The china fully refined paraffin wax has strong color, good plasticity...

Domingo 29 enero 2023

The Fischer Tropsch wax, also called FT wax, with a high melting point (generally higher than 85°) is mainly composed of linear, saturated high-carbon alkanes with a relative molecular mass of 500-1000, which gives this chemical a fine crystal structure, high melting point, and narrow...

Domingo 29 enero 2023

Crude scale wax refers to the paraffin wax that has undergone perspiration or solvent deoiling but has not undergone the final refining process. This slack wax still has a low melting point paraffin wax. In order to obtain a high melt paraffin wax, the crude scale wax needs to be refined again...

Domingo 29 enero 2023

5754 Aluminium strip/Aluminum strip is an aluminum coil by rolling an aluminum ingot and then cut into a width of the aluminum strip through a slitter component according to the application. As a China 5754 aluminum supplier, Lichen aluminum can produce aluminum strips with different...

Domingo 29 enero 2023

Glass Cosmetic Jars Wholesale The production process of cosmetic glass bottles refer to a series of action combinations (including mechanical, electronically controlled, etc.) that are repeated in a given programming sequence with the goal of producing a jar/bottle of the desired shape...

Domingo 29 enero 2023

Cap aerosol is a plastic lid that fits over the aerosol can. Generally speaking, aerosol cans are made of aluminum or iron materials. After filled with gas/liquid, a certain pressure will be generated inside the aerosol can, normally there is an aerosol valve locked in the neck of...

Domingo 29 enero 2023

Fragrance packaging including perfume cap plastic, perfume cap Aluminum, perfume cap wood, perfume cap leather, perfume cap Zamac, glass bottle, glass vials, Roll-on perfume, pocket sprayer, Purser sprayer, perfume aluminum bottle, tester perfume package, pumps, collars, perfume boxes...

Domingo 29 enero 2023

Plate extruder is one of the screw plastic extruders. The working mechanism of screw plastic extruder is to rely on the pressure and shear force generated by screw rotation, so that the materials can be fully plasticized and evenly mixed, and formed through die; Therefore, sometimes...

Domingo 29 enero 2023

This plastic profile extrusion line consists of Single Screw Extruder, Vacuum Calibration Table, Haul-off Unit, Cutter and Stacker, the producing line features of good plasticization, high output capacity, low power consumption, and etc. The main plastic profile extruder speed controlled...

Domingo 29 enero 2023

The twin-screw extruder is composed of a transmission device, a feeding device, a barrel, and a screw, and the functions of each component are similar to single-screw extruder. The difference from the single-screw extruder is that there are two parallel screws in the twin-screw extruder...

Domingo 29 enero 2023

JWELL Machinery is designed and developed in a new idea, pipe and profile extrusion line produces PP pipe series, PVC pipeline series, ABS pipeline series, composite pipe series, etc., plastic pipe extrusion machine is high-yield, low energy consumption, good melt homogeneity, and...

Domingo 29 enero 2023

Due to the increasingly stringent requirements of the market for products, Jwell has developed advanced five-layer symmetric and seven-layer asymmetric distribution technology, which makes the products produced by the equipment obtain better barrier performance. In addition, the multi-machine...

Domingo 29 enero 2023

HDPE extrusion machine production line adopts the most advanced technology of Europe, It is a new research achievement of energy-saving production line, which is suitable for high-speed extrusion of HDPE, PP, and other polyolefin pipe. compared with cornmon production line, the HDPE...

Domingo 29 enero 2023

JWELL is one of the leading HDPE blow molding machine manufacturers and blow molding machine suppliers in China. The HDPE blow molding machine, also called HDPE blow moulding machine, is mainly used for processing unsupported parisons. The advantages of HDPE moulding machine are high...

Domingo 29 enero 2023

The coating of color-painted aluminum coil is divided into a polyester-coated aluminum coil (PE) and fluorocarbon coated aluminum coil (PVDF). The polyester coating formed by repeatedly baking and coating on the surface of the aluminum plate can form a continuous solid film firmly attached...