L’END - 9027 Anuncios

Jueves 13 junio 2024

Cantidad : 1000000 pc - Precio : USD0.5-USD3000.0

The Center point of the circle at both ends of the tube are on the same straight line are called concentric reducer. The Concentric reducer (reducing pipe) is a pipe fitting used for the diameter of the pipe. The commonly used forming process is reducing diameter pressing, expanding...

Jueves 13 junio 2024

Cantidad : 1000000 pc - Precio : USD0.5-USD3000.0

A ductile iron foot valve is a kind of energy-saving valve. It is generally installed at the bottom end of the underwater suction pipe of the water pump to restrict the liquid in the water pump pipe from returning to the water source. It is not easy to be blocked and is mainly used...

Jueves 13 junio 2024

Cantidad : 1000000 pc - Precio : USD0.5-USD3000.0

The pipe dismantling joint are double flanged fittings that accommodate up to longitudinal adjustment and can be locked at the required length with the tie bars supplied. It is a new product that is connected to the pipe, valves, and other equipment and pipelines. It connects them...

Jueves 13 junio 2024

Cantidad : 1000000 pc - Precio : USD0.5-USD3000.0

The Center of a reducer circle ends which in a straight line is named as Concentric reducer. Usually reduced diameter forming process is pressed, compressed, or constricted diameter expanding compressed and reduced diameter together. Certain specifications reducers press molding may be employed...

Jueves 13 junio 2024

Cantidad : 1000000 pc - Precio : USD0.5-USD3000.0

The single-disc check valve is also called a single plate check valve, a wafer check valve: it is a valve that can automatically prevent fluid from flowing back. The disc of the check valve is opened under the action of fluid pressure, and the fluid flows from the inlet side to the outlet side...

Jueves 13 junio 2024

Cantidad : 1000000 pc - Precio : USD0.5-USD3000.0

Check Valves Flanged End Check Valves Flanged End are used mostly to prevent the medium from flowing back in the piping system. Check valve flange type only allow the medium to flow in one direction, and when the medium flows in, the disc of check valves swings off the seat to allow...

Miércoles 12 junio 2024

1. Product Introduction The graphite digestion system is an instrument used for sample pretreatment in chemical analysis. It is mainly used to dissolve organic and inorganic substances in solid samples into solutions for subsequent analysis and measurement. It heats the sample in...

Sábado 08 junio 2024

RFAD10 Full-Automatic Drawing-In Machine RFAD10 full-automatic drawing-in machine is a kind of drawing-in equipment based on seed yarn mode. Drawing-in is not related to the loom beam, so pre-drawing can be conducted in advance, pre-drawing is parallel to the previous preparation procedure...

Viernes 07 junio 2024

Cantidad : 1000000 - Precio : $0.2-0.9

Challenge Coins There are many different reasons for rewarding the custom enamel challenge coins in different sectors of the military. From fire and police colleges to sports associations and so on, the emotional value of challenger commemorative coin is much higher than the actual cost...

Jueves 06 junio 2024

Cantidad : Max 1000 p - Precio : $20-$60 per squire m

Aries Safari Lodge Aries Safari Lodge is a unique destination located near a wildlife reserve. Starwild, as a safari tipi tent supplier, their Aries Safari Lodge provides guests with an unforgettable experience, combining luxury accommodations with exciting activities such as game...

Miércoles 05 junio 2024

Traditional optical fiber collimator is the basic component of optical fiber communication device. However, with the development trend of integration and miniaturization, fiber optical switch, optical cross connection such as N * M equipment, and wavelength selection switch are now...

Miércoles 05 junio 2024

Establish A Clear Path in GERD Diagnosis alpHaFLEX Reflux Monitoring System For comprehensive impedance ph at affordable cost, choose alpHaFLEX to give your patient economical and quality care. Establish A Clear Path in GERD Diagnosis Ergonomic and compact design Faster sampling...

Miércoles 05 junio 2024

Catalog #: AP12169 Name: Amino-PEG2-amine Chemical Formula: C6H16N2O2 Molecular Weight: 148.21 CAS: 929-59-9 Purity: ≥95% Availability: In Stock SDS: Download DESCRIPTION Amino PEG 2 amine CAS 929-59-9 contains two end amino groups. It can undergo a sequential amide...

Miércoles 05 junio 2024

RC2 Wireless Smart Jump Rope The RC2 digital cordless jump rope has built-in weights, making it more powerful to hold the handle. The handle surface of this digital ropeless jump rope series has a non-slip texture design, so you don't have to worry about slipping even if your palms are sweaty...

Miércoles 05 junio 2024

C-Data Hybrid Fibre Coaxial HFC products provide high-quality image, digital or signal transmission for CATV, VOICE and other businesses. DIFFERENCE BETWEEN THE UPSTREAM AND DOWNSTREAM IN HFC NETWORKS Downstream refers to data and signals transmitted from the service provider's network...

Miércoles 05 junio 2024

RFJAT28 Air Jet Terry Looms The RFJAT28 Air Jet Terry Loom is a specialized weaving machine designed for the production of terry cloth, a type of fabric with uncut loops that can absorb large amounts of water. This high speed rapier loom uses an air jet mechanism, which involves shooting...

Miércoles 05 junio 2024

RFAD10 Full-Automatic Drawing-In Machine RFAD10 full-automatic drawing-in machine is a kind of drawing-in equipment based on seed yarn mode. Drawing-in is not related to the loom beam, so pre-drawing can be conducted in advance, pre-drawing is parallel to the previous preparation procedure...

Miércoles 05 junio 2024

RFJW03 Water Jet Looms RFJW03 series water jet loom is suitable for weaving light and medium-thickness fabrics. Drawing on Rifa's experience in development of other water jet looms, the design is optimized, the weaving speed and quality of the loom are improved. The loom has varied...

Miércoles 05 junio 2024

Block ferrite magnets are a type of permanent magnet made from a mixture of iron oxide and barium or strontium carbonate. These magnets are also known as ceramic magnets due to their brittle, ceramic-like texture. Ferrite Magnets, also known as ceramic magnets, are made of a composite...

Martes 04 junio 2024

HIFU machine for body and face professional is a non-invasive cosmetic procedure that utilizes ultrasound technology to lift, tighten, and rejuvenate the skin. It is a safe and effective treatment for non-surgical skin tightening, targeting areas such as the face, neck, and décolletage...

Martes 04 junio 2024

Cantidad : 50000 pcs - Precio : $20-$50

HYDRAULIC CHUCK A hydraulic chuck is a specialized tool holder used in precision machining operations such as hydraulic milling chuck and hydraulic collet chuck. Hydraulic chuck clamps and securely holds cutting tools with high accuracy and stability, reducing vibration and improving...

Martes 04 junio 2024

Cantidad : 50000 pcs - Precio : $20-$50

HSK･T Boring Bar Holders HSK-T boring tool holders are with outlet holes on the end face, with wide range diameters from 6mm to 40mm. SPECIFICATION OF HSK･T BORING BAR HOLDERS Size d1 d2 l1 l2 HSK40T-E2-06-055 6 34 55 35 HSK40T-E2-08-055 8 34 55 35 HSK40T-E2-10-055...

Martes 04 junio 2024

Hexamethyldisiloxane(MM)SiSiB® PC9200, also called as HMDSO or HMDO, is a colorless clear liquid. Technical Data CAS No. 107 46 0 EINECS No. 203-492-7 Formula C6H18OSi2 Molecular Weight 162.38 Boiling Point 99°C [760mmHg] Flash Point -1°C Appearance Clear liquid APHA 10 Density 25/25°C 0...

Martes 04 junio 2024

The excavator hydraulic pump seal kit produced by Elephant Fluid Power has a wide variety and complete models, where you can achieve a one-stop shopping experience. Our product quality and testing standards meet the requirements of Rexroth, Danfoss, Komatsu, Caterpillar, etc., compatible...

Martes 04 junio 2024

Cantidad : 50000 pcs - Precio : $20-$50

CNC TOOL HOLDERS CNC turning tool holder types are widely used in CNC milling machining, machines as machining centers and milling machines. Based on different international standards, BRIGHT-TOOLS has gradually derived our own standards. BRIGHT-TOOLS is committed to making the CNC...

Martes 04 junio 2024

Top hammer shank adaptors, the role of which in rock drilling is to directly bear the impact energy and torque of the rock drill, and is used to transfer the energy from drill rig to drill rod. One end of the shank adaptor is connected to drill rig, and another end is connected to drill rod...

Martes 04 junio 2024

MF rod, also known as speed drill rod, has a male thread at one end and a female thread at the other end. It can directly connect to the shank adapter without the aid of a coupling sleeve, which eliminates the defect that the equal diameter thread connection is prone to vibration...

Martes 04 junio 2024

Hardwood Flooring End Cap Specification Product Name End Cap for Vinyl Plank Flooring Specification 2400*35*8 mm Package Quantity 25 pcs/carton Installing Way glue/snap/staple Application corner edge, floor edge trim If you want to know more about hardwood floor end cap molding ...

Martes 04 junio 2024

T5 LED Tube Light T5 LED tube light is an led tube with a 5/8-inch diameter, which is mainly used in lighting scenes such as factories, warehouses, supermarkets, and offices. Anern LED series T5 tubes adopt the style with a support bracket. As there is no need to purchase separately...

Martes 04 junio 2024

Cantidad : 10

KRD100 series incline impact tester is a testing machine that evaluates the ability of loads to withstand inclined impacts or crushing forces due to the force of gravity. These impacts and forces can affect the stability and safety of the packaging products. KRD100 series inclined...