ACCURACY - 5437 Anuncios

Sábado 03 septiembre 2016

Precio : 10,00 €

male thread thermostatic mixing valveMODEL: DN15M-2With check valveWith check valveIdeal working pressure0.1-0.5MpaCold water inlet temp.4-29 ℃Hot water inlet temp.50-85 ℃Mixed water outlet temp.35-45 ℃ customizedFlow rate11.67L/Min 0.1Mpa pressure differenceTemp accuracy±2℃Body materialNickel...

Jueves 01 septiembre 2016

AT902 AUTOMATED FILTER TESTER Application: AT902 Automated Filter Tester is a universal tester, development according to the standard of GB2626-2006-6.3, EN 149：2009, it mainly used for detecting the efficiency of the particulate respirator filtration and detecting the filtration...

Jueves 01 septiembre 2016

AT901-II AUTOMATED FILTER TESTER Application: AT901-II Automated Filter Tester is designed for a stand- alone tester to check a few filters per day or need to integrate your tester in an automated, high-volume, high-volume production line. It has proven track records of durability...

Jueves 01 septiembre 2016

AT901 AUTOMATED FILTER TESTER Application: AT901 Automated Filter Tester is designed for a stand- alone tester to check a few filters per day or need to integrate your tester in an automated, high-volume, high-volume production line. It has proven track records of durability, reliability...

Jueves 01 septiembre 2016

AT510 DIFFERENTIAL SCANNING CALORIMETER Main machine Accessories Application: AT510 Differential Scanning Calorimeter is used to determine and research the melting and crystallization process, glass transition temperature, oxidation induction time (OIT), reaction heat, heat enthalpy...

Jueves 01 septiembre 2016

AT310 Plastic Manholes Mechanical Tester Application: AT310 Plastic Manholes Mechanical Tester is mainly used to do the mechanical properties tests of manholes. Not only does it test the anti-shearing and axial load of manholes base, but it can also test thermoplastic pipe's ring stiffness...

Jueves 01 septiembre 2016

AT230 THERMAL CYCLING TESTER Application: AT230 Thermal Cycling Tester is designed according ISO and ASTM standard requirement; it's mainly used to check the leakage status of composite pipe & fittings when subjected to specify cycling times under specified internal pressure load...

Jueves 01 septiembre 2016

AT220 RAPID CRACK PROPAGATION (RCP) TESTER Application: AT220 Rapid Crack Propagation (RCP) Tester is used to determine the arrest or propagation of a crack initiated in a thermoplastics pipe at a specified temperature and internal pressure by small-scale steady-state test (S4 test)...

Jueves 01 septiembre 2016

AT211 WATER HAMMER TESTER Main machine with tank Application: AT211 Water Hammer Tester has been designed to determine the behavior of and its connection when subjected to cyclic pressure shock. It can satisfy your testing requirements of plastic , such as PP-R, PP-H, PE, PEX...

Jueves 01 septiembre 2016

AT210 Hydrostatic and Burst Testing Machine Introduction AT210 Hydrostatic and Burst Testing Machine features compact structure design and simple to use. It is specifically used for time-to-failure test of plastic pipe under constant internal pressure, and for test of resistance...

Jueves 01 septiembre 2016

AT123 MELT FLOW INDEX TESTER Application: AT123 Melt Flow Index tester is used to measure the melt flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastic resin in quality control and research applications. It is suitable for PC, nylon, fluoroplastics and other engineering...

Jueves 01 septiembre 2016

AT121 Series Ring Stiffness Tester Description: AT121 Series Ring Stiffness Tester with larger test space is specifically designed for plastic pipe ring stiffness testing. Equipped with suitable test grips and fixtures, it can address the needs of standardized and routine testing...

Jueves 01 septiembre 2016

AT116 Pendulum Impact Tester Product Description: AT116 Pendulum Impact Tester is widely used for Izod and Charpy impact tests on plastics. Equipped with suitable pendulums and fixtures, it can carry on tensile impact on plastics, impact tests on plastic pipe and cast iron materials...

Jueves 01 septiembre 2016

AT106 100KN Full Automatic Testing Machine Introduction: AT106 Full Automatic Testing Machine consists of main machine, hydraulic translational clamp, hydraulic pressure station, full automatic extensometer, cross-section measurement unit, loading manipulator, uploading manipulator...

Jueves 01 septiembre 2016

AT105 Universal Testing Machine with Chamber Product Description AT105 Universal Testing Machine with Chamber addresses the needs of standardized and routine testing, providing the user high quality at the most affordable price. The dual column testing systems with rugged structure...

Martes 30 agosto 2016

Precio : 10,00 €

HPC-GD-27A GSM900 and DCS1800mhz Dual band signal repeatersProduct introductionMobile signal booster is designed to enhance the indoor mobile phone signal. The main reason leads to the weak indoor signal is the rebar inside of the concrete walls. Because the rebar will absorb and...

Martes 30 agosto 2016

Precio : 10,00 €

HPC-G27 GSM900mhz Mobile Phone signal boosterGSM mobile networks are everywhere around the world but depending on where a mobile phone is located, regrettably the quality of the GSM signals differ significantly from excellent to poor. The item in auction is designed to address the...

Martes 30 agosto 2016

Precio : 10,00 €

HPC-GL-27 GSM900 and 4G 2600mhz Dual band signal repeaters A cell phone signal booster (also known as cellular repeater or amplifier) is a device that boosts cell phone signals to and from your mobile phone whether at home or office or in any vehicle. It does this by taking the existing...

Martes 30 agosto 2016

Precio : 10,00 €

HPC-CW-27 CDMA850 and LTE2100mhz Dual band signal repeatersA cell phone signal booster (also known as cellular repeater or amplifier) is a device that boosts cell phone signals to and from your mobile phone whether at home or office or in any vehicle. It does this by taking the existing...

Martes 30 agosto 2016

Precio : 10,00 €

A201 Digital Ear and Forehead Thermometer is specially design to for ear and forhead temperature measurement for infants and adult regardless of room temperature. It can be used by consumer in household environment and doctor in clinic as reference.Feature: Two in one thermometer...

Martes 30 agosto 2016

Precio : 10,00 €

YS-F30/YS-F30/YS-F30 Fiber Laser Marking MachineTechnical parameter: Model NO YS-F30/YS-F30/YS-F30Laser Power: 10w,Website: http://www.chinawoodcncrouter.com, 20w, 30wLaser Type: FiberEngraving/Cutting Depth: Depends on Different MaterialsLaser Module Fife: >100,000 Working HoursMarking Area...

Martes 30 agosto 2016

Precio : 10,00 €

YS-1390 laser engraving cutting machineApply to industry and materialsadvertisement signs and marks making, handicraft industry, crystal accessories, paper cutting, wood industry, printing industry, clothing and leather industry, etc.This machine adopts the DSP data control technique...

Martes 30 agosto 2016

Precio : 10,00 €

YS-1290 laser engraving cutting machineApply to industry and materials advertisement signs and marks making, handicraft industry, crystal accessories, paper cutting, wood industry, printing industry, clothing and leather industry, etc.This machine adopts the DSP data control technique...

Martes 30 agosto 2016

Precio : 10,00 €

YS-1825-8 Eight Spindle Synchronized CNC MachineYS-1825-8 CNC Relief Engraving Machine Apply to industry and materialsGranite, marble, Qingshi, sandstone, and other stone carvingsGranite and other hard stone carving to be at level 5 mmMarble, Qingshi, can be a sculpture to 5 mm Functional...

Martes 30 agosto 2016

Precio : 10,00 €

Big table plasma cutting machine if your machine axis X is more 1800mm, we recommend you're the rack on earth type. YS plasma cutting machine could cut even, the shape of wave or other uneven shapes and steep pipe such cylindrical metal. Main Feature: Easy to use hand held controllerUnique...

Martes 30 agosto 2016

Precio : 10,00 €

Mini size plasma cutting machine YS plasma cutting machine could cut even, the shape of wave or other uneven shapes and steep pipe such cylindrical metal. Main Feature: Easy to use hand held controllerUnique design, easy to learn and operateBrushless micro stepper motors or servo...

Martes 30 agosto 2016

Precio : 10,00 €

Technical parameter: Model NO YS-F30/YS-F30/YS-F30 Laser Power: 10w, 20w, 30w Laser Type: Fiber Engraving/Cutting Depth: Depends on Different Materials Laser Module Fife: >100,000 Working Hours Marking Area: 100*100mm, 200mm*200mm/300*300mm/300*600mm Min. Line Width: 0.05mm Positioning...

Martes 30 agosto 2016

Precio : 10,00 €

With Syntec numerical control system, the machine is of high speed and high machining accuracy. the Germany original rotating arm ensure the accuracy and strength of the machine. Z-axis travel can be heightened to 2.1 meters, so it is very suitable for processing large-scale three-dimensional...

Martes 30 agosto 2016

Detailed information: 1. Carbide used is Ceratizit from Luxembourg. 2.This mill bit is made by machine "Anca Rx7" from Australia with stable quality and high accuracy. 3.This cutter can be used on CNC machine center, milling machine, slotting machine, ect. 4.Life span is much...

Martes 30 agosto 2016

Detailed Information: 1. This dowel drill can be used on CNC center,boring machine for MDF, solid wood, particle board etc. 2. Tunsten Carbide used is Ceratizit. 3. Life span is much more longer than standard type. 4. Panel edge is not easy to break with high accuracy of inner bore...