PIPES - 7625 Anuncios

Jueves 23 mayo 2024

3D printed nylon parts can be used for product verification or directly used as functional products. The product is 3D printing with light weight and shorter production cycle. It has great application space in automobile, aerospace, art creation, medical treatment and other fields...

Miércoles 22 mayo 2024

MAOBANG Heavy Duty cantilever storage Rack is specially designed to store long or varied load units, such as metal profiles, pipes, mouldings, wooden board, metal or plastic sheeting, etc. The system basically consists of vertical columns and horizontal bases, which are placed to...

Miércoles 22 mayo 2024

The storage of goods requires the cooperation of forklifts, and the same channels are used for forklifts to enter and exit, and the storage density is very good. Because the forklift is walking in the entire racking system, we usually call it drive-through pallet rack system. Contact...

Miércoles 22 mayo 2024

Steel Wire Forms We also offer a wide range of finishing options on most fabrications including meeting OEM specifications or industry standards. Finishing options frequently include e-coating, powder coatings, passivation, heat treatment, hardening, neutral treatments, and a variety...

Martes 21 mayo 2024

The custom windshield wiper system is not only as simple as wiping the water off the windshield, but also wipes the rainwater on the glass surface into a uniform water film layer, allowing the light to pass through smoothly without refraction to ensure the driver's vision is clear...

Martes 21 mayo 2024

ASME SB111 C70600 Tube Copper-nickel alloy that resists seawater corrosion and has high antifouling properties against marine microorganisms. You can find ASTM B111 tubes using ASME SB111 alloy are widely used in shipbuilding repair, petrochemical, natural gas, and other marine engineering...

Martes 21 mayo 2024

ASTM A789/A789M, 2022 Edition, March 1, 2022 - Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service. ASME SA789/ASTM A789 TUBING BY YUHONG ASTM A789/ASME SA789 Duplex Steel Pipe/Tube YUHONG GROUP provides the best ASTM A789/ASME...

Martes 21 mayo 2024

ASTM B622/ASME SB622 is the specification that covers seamless pipe and tube of nickel and nickel-cobalt alloys. Pipe and tube shall be supplied in the solution annealed and descaled condition. When atmosphere control is used, descaling is not necessary. ASTM B622 Seamless Pipes and...

Martes 21 mayo 2024

ASTM sa 312/ASME SA312 stainless steel pipe for sale covers seamless straight seams welding and heavy cold work welding of austenitic stainless steels steel pipes for high temperature and general corrosion serve. ASTM a312 stainless steel tube/ASME SA312 STAINLESS STEEL PIPE FOR SALE...

Martes 21 mayo 2024

ASTM A269/ASME SA269 stainless steel tube covers the nominal wall thickness grades of stainless steel pipe specified in the standard for general corrosion resistance and low or high-temperature applications. Usually applied as boiler, superheater, and heat-exchanger tubes. ASTM A269/ASME...

Martes 21 mayo 2024

ASTM A249/ASME SA249 stainless steel tube by Yuhong group covers nominal wall thicknesses welded and heavily cold-worked welded pipes made of the following materials Various grades of austenitic steel for boilers, superheaters, heat exchangers, or condenser pipes. ASTM A249/ASME SA249...

Martes 21 mayo 2024

ASTM A213 tube/ASME SA213 Stainless Steel Tube YUHONG GROUP provides the best ASTM stainless steel tube/ASME SA213 Stainless steel tubes including straight tubes, and U tubes for heat exchangers, boilers, and superheaters. TP304/TP304L/TP304H Stainless Steel Seamless Tube TP316/TP316L/TP316H...

Martes 21 mayo 2024

1. Product introduction PFA, also known as soluble polytetrafluoroethylene and Teflon, can be used for trace analysis, isotope detection, ICP-MS/OES/AAS analysis and other experiments. Capacity (ml): 5/10/25/30/50/100/200/250/500/1000/2000 2. Product characteristics 1. Strong corrosion...

Martes 21 mayo 2024

The neck is equipped with a threaded sealing cover, which can connect 1/4 of the pipe to other reaction devices. The bottom valve of the bottle body can be welded, and various specifications can be customized. Clean and pollution-free, resistant to strong acids and alkalis. #reactionbottle...

Martes 21 mayo 2024

The neck is equipped with a threaded sealing cover, which can connect 1/4 of the pipe to other reaction devices. The bottom valve of the bottle body can be welded, and various specifications can be customized. Clean and pollution-free, resistant to strong acids and alkalis. #reactionbottle...

Martes 21 mayo 2024

Overview of KY-Lab Twin Screw Extruder Since its establishment in 1993, KY has been devoted to the development and manufacture of small lab scale twin screw extruder. On the 9th anniversary of the introduction of HK and SK series twin-screw extruder, KY introduced two new KY-Lab...

Martes 21 mayo 2024

China Full Welded Ball Valve Since the full welded ball valve seat is composed of a carbonized Teflon seal ring and a disc spring, it has strong adaptability to pressure and temperature changes, and will not cause any slippage within the marked pressure and temperature range. The...

Sábado 18 mayo 2024

OVERVIEW Aneurysm Coils The Ton-Bridge super soft medical coils are the neurovascular embolization coils designed for the embolization of intracranial aneurysms and other neurovascular abnormalities, such as arteriovenous malformations and arteriovenous fistulae. The aneurysm and...

Sábado 18 mayo 2024

Magnetic pipe thermometer consists of an aluminum dial, bi-metal thermometer sensor, brass pointer, and metal handle, durable, and responds quickly and accurately to temperature changes, allowing you to know the temperature of the magnetic flue pipe thermometer at all times. Magnetic...

Sábado 18 mayo 2024

Precio : 2.8-3.2USD

Common Injection Molding Materials What materials are used in injection moulding? Materials used in injection moulding generally include abs molding, nylon injection molding, polycarbonate injection molding, PP injection molding, PVC injection molding, HDPE injection molding, and so on...

Sábado 18 mayo 2024

Precio : 2.8-3.2USD

Plastic Injection Molding Plastic injection molding is a method of making plastic products. The molten plastic is injected into the mold by pressure, and then cooled and molded to obtain various plastic parts. There are mechanical injection molding machines dedicated to injection molding...

Sábado 18 mayo 2024

1. Product introduction The polytetrafluoro (PFA) beakers produced by our factory can be used for trace analysis, isotope analysis and other experiments, and are suitable for ICP-MS laboratories. Applicable to semiconductor, polysilicon, photovoltaic electronics and lithium battery industries...

Sábado 18 mayo 2024

Cantidad : 200 contai - Precio : 10-150USD

Compact lounge chair outdoor recliner: A recliner with a triangular locking system that can be locked into different positions for sitting up, lying down, or lying down. Ergonomically designed to reduce muscle tension and stress. Big and tall outdoor lounge chair is turdy and comfortable...

Sábado 18 mayo 2024

Dog Bone Test Specimen Dog Bone material test sample testing integrates domestic testing resources, and provides exclusive solutions for profile, steel pipe, plate, stainless steel, structural steel, etc. according to various testing standards including tensile test and various performance...

Viernes 17 mayo 2024

PFA material has excellent physical and chemical properties, and can withstand highly corrosive media such as oxidants, acids, alkalis, hydrofluoric acid, chlorine gas, and solvents, maintaining the long-term stable operation of valves, spring tubes, etc. Accept various customized...

Miércoles 15 mayo 2024

Model: CFJG-150 Product Performance Paper Layer: 25 Layers Inner Diameter: 50-250mm Wall Thickness: 1-15mm Winding Speed: 1-25 meters/min Winding Nose: Four noses double belts Length Fixing: by Infrared Cutting Length: 1000-5000mm Cutting Way: Single high-speed steel blade Poy Dty...

Miércoles 15 mayo 2024

Model: CFQG Product Performance Inner Diameter: 50-152mm Wall Thickness: 1-15mm Mother Tube Length: 1640mm Cutting Tube Length: 90-1600mm Cutting Blades: 8 pcs on machine Working Speed: 30 cuts/min. Tube Loading: Manually Tube Unloading: Manually Parameter of Multi Cutter Paper Core...

Viernes 10 mayo 2024

RFJW03 Water Jet Looms RFJW03 series water jet loom is suitable for weaving light and medium-thickness fabrics. Drawing on Rifa's experience in development of other water jet looms, the design is optimized, the weaving speed and quality of the loom are improved. The loom has varied...

Jueves 09 mayo 2024

SANITARY HEAT EXCHANGER The wfi sanitary heat exchanger (sterile double tube plate heat exchanger) is designed to work under the working conditions with the highest sanitary requirements, and the double tube plate structure design is adopted. The port of the wfi heat exchanger adopts...

Jueves 09 mayo 2024

Purified water system for pharmaceuticals adopts the latest processes such as reverse osmosis and EDI. Purified water generation and distribution system designs a complete set of purified water process in a targeted manner. The quality of water system in pharma company meets the requirements...