VISCOSITY - 1341 Anuncios

Martes 13 diciembre 2022

Cantidad : 1kg - Precio : 8USD

Product Description GTSIL-T Series silicones are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be casted into the cured silicone molds : plaster, gypsum, concrete , wax...

Sábado 10 diciembre 2022

Cantidad : 200kg - Precio : 7.88USD

- Product description - GTSIL-P series silicones are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Sábado 10 diciembre 2022

Cantidad : 200kg - Precio : 7.88USD

- Product description - GTSIL-P series silicones are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Sábado 10 diciembre 2022

Cantidad : 200kg - Precio : 7.88USD

- Product description - GTSIL-P series silicones are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Sábado 10 diciembre 2022

Cantidad : 200kg - Precio : 7.88USD

- Product description - GTSIL-P series silicones are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Sábado 10 diciembre 2022

Cantidad : 200kg - Precio : 7.88USD

- Product description - GTSIL-P series silicones are two compounds, liquid, with the mixing ratio of 1: 1 ( or 10: 1) , it's also called addition cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. There are a wide range of...

Sábado 10 diciembre 2022

Cantidad : 1-50 tons - Precio : 1.7-3.5 usd/kg

Spine Glue Products The spine glue used in book binding have different requirements for the hardness, elongation, breaking strength and permanent deformation rate. The performance requirements of the book binding adhesive are far lower than those of the back glue because the book...

Sábado 10 diciembre 2022

Cantidad : 1-50 tons - Precio : 1.7-3.5 usd/kg

The side glue and back glue used in book binding have different requirements for the hardness, elongation, breaking strength and permanent deformation rate. The performance requirements of the side glue are far lower than those of the back glue because the book back is required...

Sábado 10 diciembre 2022

Based on the theory of stir cast invented by Mr. D.B. Spencer and M.C.Flemings, the semi-solid die casting technic has been further developed and applied over 30 years worldwide. The main principle of the semi-solid die casting technic is to perform a strong stir during the metal...

Viernes 09 diciembre 2022

Product description Resin craft mold silicone are two compounds, liquid, tin cured silicone rubber that have exceptional tear strength and working properties, cured in room temperature. A range of materials can be cast into the cured silicone molds : plaster, gypsum, concrete , wax...

Viernes 02 diciembre 2022

Cantidad : 5T - Precio : 8-200

Different gel strength affects the taste, elasticity and crispness of final products. The gel strength is enhanced with the increase in heating temperature. The thermal-irreversible gel is formed when the temperature reaches 80°C. Then increase the temperature of the curdlan gel till 130°C...

Viernes 25 noviembre 2022

Additive Manufacturing With SH8900H SH8900H is an ideal material for many industries, including Molding. The powder has been tested for use on Eplus3D's SLA 3D printers. Eplus3D also offers a wide range of validated processes for the above materials to ensure that the performance...

Miércoles 23 noviembre 2022

Diaphragm Pressure Gauge Diaphragm pressure gauges are mainly used to measure the pressure of special media such as high-viscosity media, granular media, crystallizable media and easy-to-solidification media. They can measure various corrosive media using the flanges and isolation...

Martes 08 noviembre 2022

Precio : By product

Coil coaters provided by BOYA adopts modular design and is highly intelligent. The coil coating equipment, such as coil coating machine is easy to operate and has high accuracy. Coil Coaters Types As a trustworthy and professional coil coating equipment manufacturer, also called coil...

Martes 08 noviembre 2022

Precio : By product

After years of professional research and development, BOYA is committed to providing high-quality metal processing equipment. Our metal processing machinery is not only rooted in the basic theory of material elastoplastic deformation, but also actively innovates in combination with...

Lunes 31 octubre 2022

With refined tapioca, organic tapioca, corn starch as raw material, IMO syrup will be obtained through the enzyme, liquefaction, concentration, drying, and a series of processes. Isomalto-oligosaccharide 900 Syrup can promote bifidobacterium of the body significantly and have the...

Viernes 28 octubre 2022

Other ingredients, food additives, and solutions are also available upon request with the assurance that we source the best products at the best conditions from food additives distributor and food ingredient distributor. Maltodextrin Maltodextrin is a very common food ingredient that...

Viernes 28 octubre 2022

ACE Ingredients Natural Vegetable Fiber Ingredient ACE Ingredients-Acefiber Acefiber Series are natural and special co-processed vegetal fiber compositions, specifically developed for the definitive binding of water. They have strong gelling properties that hold and control water...

Jueves 20 octubre 2022

Cantidad : USD3000-20 - Precio : 30-40sets/per month

Pre Deformation Mold When the plastic material rushes into the mold cavity, it loses heat due to heat conduction, and the melted plastic will freeze and solidify, therefore, for complex or large products, high mold temperature is usually used for filling, the purpose is to reduce...

Miércoles 19 octubre 2022

Name: Hydroxy Terminated Polydimethylsiloxane (Methyl Silicone PDMS Oil) Melt Point (℃): -59 Spontaneous combustion point (℃): 450 Saturated vapor pressure (KPa): No Data Explosive: No Data Solubility: Soluble in benzene, toluene, ethylene, ethyl ether, partially soluble in ethanol...

Miércoles 19 octubre 2022

EVA hot melt adhesive is a solid polymer that is solvent-free, no moisture at room temperature it is solid, heating to a certain temperature, into the flow and a certain viscosity of the liquid binder. After melting, eva based hot melt adhesive is transparent or translucent yellowish or white...

Miércoles 19 octubre 2022

This series of RH products are widely used in various textbooks, hardcover books, picture albums, manuals, magazines, etc., and book binding glue can bond coated paper and offset paper ranging from 80-200g. Hot melt adhesive for bookbinding is divided into spine glue and side glue...

Martes 18 octubre 2022

The material of silicone cpu pad is soft, good compression performance, good thermal insulation performance, adjustable thickness range is relatively large, suitable for filling the cavity, both sides have natural viscosity, operability and maintainability; The main purpose of the...

Sábado 15 octubre 2022

Microcrystalline wax rubber is widely used in rubber products with natural rubber and synthetic rubber as raw materials. It can improve the processing performance of rubber, has physical and mechanical properties, and good oil absorption performance. It can form stable and uniform...

Sábado 15 octubre 2022

Paraffin wax emulsion is a multi-phase emulsion in which materials such as natural wax and synthetic wax are dispersed in water under the action of an emulsifier. The production method is mainly a phase inversion emulsification method. We, being one of wax emulsion suppliers, can...

Sábado 15 octubre 2022

With a high transparency and gloss level, Paraffin Wax Emulsion PWE 60S is an excellent choice of coating for general applications. It gives your coatings a good abrasion resistance as well. Features of Paraffin Emulsion PWE 60S High transparency and gloss Good abrasion resistance...

Sábado 15 octubre 2022

Paraffin wax emulsion formulation PWE 50SA is a high transparency, high gloss emulsified paraffin wax. It is recommended for use in applications which require good abrasion resistance and a high degree of hardness. Features of Polyethylene Wax Emulsion Formulation PWE 50SA High transparency...

Sábado 15 octubre 2022

Microcrystalline wax is obtained from petroleum distillation residual heavy fractions by solvent separation, refining and hydrogenation. It is a combination of branched and straight chain saturated hydrocarbons with carbon numbers greater than 35. Unlike paraffin waxes, microcrystalline...

Sábado 15 octubre 2022

Microcrystalline wax is obtained from petroleum distillation residual heavy fractions by solvent separation, refining and hydrogenation. It is a combination of branched and straight chain saturated hydrocarbons with carbon numbers greater than 35. Unlike paraffin waxes, microcrystalline...

Sábado 15 octubre 2022

KH Paraffin Petroleum Based Wax F66N/L/H has the fine crystal structure, and relatively has the good compatibility with the most of polymers. In adhesives applications, it is added in the EVA system, its crystal property adjust the viscosity of the adhesives system, lift up the setting time...