PINS - 3449 Anuncios

Sábado 30 diciembre 2023

A lifting eye anchor is a type of lifting device used in heavy lifting and rigging operations. It consists of a forged steel pin with an eye at the top, which can be inserted into a pre-drilled hole in a load-bearing structure. The eye is designed to provide a secure point of attachment...

Viernes 29 diciembre 2023

Simple combination type (super flat hollow shaft), pursuing flat structure to the extreme, suitable for the application with the requirement on flat design with harmonic drive gear reducer. HMHD Series Harmonic Drive Hat Type List HMHD-Ⅲ Simple Unit (Super Flat & Hollow Shaft)...

Viernes 29 diciembre 2023

Data Collection and Analysis: The vehicle mount touch computers can collect a wide range of data, from soil conditions to weather data. This data can be analyzed to make informed decisions about planting, irrigation, and harvesting. Navigation: The vehicle mount terminal can provide...

Jueves 28 diciembre 2023

Structured with a safety bolt, this shackle offer a double safety. The bolt, nut and safety pin prevents accidental unscrewing during lifting operation. Galvanized surface offers a long-term durability of corrosion resistance. Particularly important for use offshore and it is can...

Jueves 28 diciembre 2023

The cable conforms to the IEC Standard (EU) of EV Charging, which suits Electric Vehicles manufactured in European Countries. One end with sheath connects to the EV while The other end connects to the Charging Station. The other option is Cable Spiral Type, it saves more space when stocking...

Jueves 28 diciembre 2023

The cable conforms to IEC & SAE Standard (EU & USA) of EV Charging, suits Electric Vehicles manufactured in European Countries and America. The Type 1 end (with sheath) connect to the EV while The Type 2 end connects to the Charging Station. The other option is Cable Spiral Type...

Jueves 28 diciembre 2023

The cable conforms to the IEC Standard (EU) of EV Charging, which suits electric vehicles manufactured in European countries. For better convenience, it has a simple design that no button on the top of the connector. It consists of Control Box and EU Plug at the tail end, a nice solution...

Jueves 28 diciembre 2023

Our type 2 charging cable conforms to the IEC Standard (EU) of EV Charging, which suits electric vehicles manufactured in European Countries. For better convenience, this type 2 electric car charging cable has a simple design that has no button on the top of the connector. The other...

Jueves 28 diciembre 2023

Jayuan AC type 2 charging socket is used for the home charging station as well as directly mounted wall socket for ev box charging. Slow charging option is available and it's suitable to connect to the Type 2 connector and vehicle which adapts the type2 charging system. Features of...

Jueves 28 diciembre 2023

The bear & honey-looking spinning tea cups ride is a parent-child interaction class single-cup product. It is based on bear eating honey as the theme of design, the appearance of the cockpit design is a bear hug honeypot. Through the steering wheel in the cockpit, passengers adjust...

Jueves 28 diciembre 2023

Custom Motorcycle Brake Caliper Parts We have a variety of motorcycle brake caliper parts for your choice. Our motorbike brake calipers are designed into 4 types: 3 positions, 2 pistons, 1 piston, and opposed pistons. Also, we can design custom motorcycle caliper parts according to...

Jueves 28 diciembre 2023

If you are looking for durable screw-on magnets or mountable magnets, wholesale pot magnets will be the best items for you. Pot magnets(also called cup magnets) are single-sided magnet assemblies, the steel cover not only makes the strong permanent pot magnets more durable but also...

Jueves 28 diciembre 2023

Those practical magnetic accessories used to fix important notes, brainstorming or scheduling at work are given the name of office magnet(magnetic office supplies). Most of our office magnets are made of neodymium, which makes their adhesion much stronger than ferrite magnets, and...

Viernes 15 diciembre 2023

A connector mold, also known as a connector tooling, is a type of injection mold that is specifically designed to produce connectors or cable assembly components. Connectors are widely used in different industries, such as telecommunications, automotive, consumer electronics, and many others...

Viernes 15 diciembre 2023

The Welinktech Connector Assemble Machine is a cutting-edge device designed to create a range of connectors for various industrial applications, including electrical, coaxial, and fiber optics. The machine uses automated processes to combine components like pins, sleeves, and sockets...

Jueves 14 diciembre 2023

Rated power 350W ●Signal 8Ω ●Driver unit: 15"x1,1.75"x1 ●Max SPL: 119±2dB ●Sensitivity: 95±2dB ●Freq. Response: 55Hz-18kHz Specifications of 350W Speaker System Frequency Response 55Hz-18KHz Rated Power 350W Maximum Input Power 700W Coverage Range 80°x60° MAX SPL 121dB...

Sábado 09 diciembre 2023

Cantidad : 100000/day

Brief Introduction of Coin Supercapacitors Supercapacitor or double layer capacitor is a brand a new type of energy storage device. It is one of the most advanced inventions in recent years, which is much better than conventional capacitor from many aspects. Supercapacitor or ultracap...

Sábado 09 diciembre 2023

Cantidad : 100000/day

Brief Introduction of Kamcap 5.5 V 1.0 F Sealed Supercapacitor SE Series Performance characteristics: Standard energy series Typical applications: RAM, detonator, car recorder, smart meter, vacuum switch, digital camera, motor drive, clock circuit, UPS, toy, program-controlled switch, etc...

Sábado 09 diciembre 2023

T&S TSPP-31192-LR is a Series single-mode, Pluggable Fiber-Optical SFP for 10G Ethernet, compliant with the IEEE 802.3ae 10GBASE-LR/LW standards. TSPP-31192-LR module is designed for single-mode fiber and operates at a nominal wavelength of 1310nm. The transmitter section uses...

Sábado 09 diciembre 2023

The qsfp module is a highly integrated 4x10G transceiver focused on reach, bandwidth, density and cost for high port-count 40G systems, and client-side 40G interfaces. The 40G QSFP+ LR4 Lite transceiver is designed for applications based on the IEEE802.3ba 40GBASE-LR4 standard of up to 2km reach...

Jueves 07 diciembre 2023

We can also provide various sizes and specifications of wickets for wicket oven with chrome plating, nickel plating, chrome plating, and zinc plating as surface treatment. TIG welding, riveting, or spot welding can be used. Pin specifications are 6.2 × 9.2mm, 6.7 × 9.8mm, 5.7 × 7...

Miércoles 06 diciembre 2023

Leadtek developed the PCBA for converting signals from EDP/LVDS/RGB/MIPI to HDMI or HDMI+VGA, we also support displays with SSD1963. To know more information, welcome to send us inquiries. Types of TFT Modules Accessories 2.4 Inch with CTP 240*320 Resolution with SPI Interface IPS...

Martes 05 diciembre 2023

Because the push to connect flanged bronze ball valve is designed and manufactured with a push rod connection, push ball valve is ideal for service and maintenance work in tight spaces. Install push button ball valve on wet pipelines quickly to stop the flow of water. There are no special tools...

Martes 05 diciembre 2023

As one of the professional thermocouple cable suppliers and thermocouple cable manufacturers in China, Tinko offers thermocouple cables that are constructed of high quality, durable and very flexible PVC jacketed cables. The connectors on both ends could be single or double latch...

Martes 05 diciembre 2023

Tinko provides wide range of premium mold black terminal box for hot runner system at an affordable wholesale price of terminal box. We pay attention to every detail of hot runner spare parts. Components are chosen based on our customer's application requirements and choice of connectors...

Martes 05 diciembre 2023

Cantidad : 5000 units - Precio : 8-2 million

NDT Application: Eddy current hardness testing technology has been widely used in the detection of metal components in the automotive The eddy current technology is usually used to detect engine blade cracks, bolts, cracks in the screw holes, multi-layer structure of the aircraft...

Martes 05 diciembre 2023

Cantidad : 5000 units - Precio : 8-2 million

ECT Eddy current testing used by eddy current testing machine is a non-contact testing method, which mainly uses the electromagnetic field and electromagnetic induction between metals to detect. It is one of the NDT non-destructive testing methods in the industry. The principle...

Martes 05 diciembre 2023

Greenconn's high speed board to board connector can be used in applications that require high-speed signal or power transmission. Signal transmission can reach a high-speed of 4GBits, with single-pin current transmission of 1.7A/Pin. They are designed with double-contact spring terminals...

Martes 05 diciembre 2023

Production status: Active If you would like to know more about this product, please contact us. Specifications： Current Rating： 1.0Amp Insulation Resistance： 1000MΩMin Dielectric Withstanding Voltage： 300VAC Contact Resistance： 20mΩMax Operating Temperature： -40ºC to +105ºC Materials：...

Sábado 02 diciembre 2023

1. Electronic components are wound with metallized organic thin film. 2. Plastic shell, aluminum oxide package, single battery core or multiple battery cores can be installed in one shell. 3. The installation parts include plastic ears and iron ears. 4. Lead-out methods include...