HTML - 27536 Anuncios

Tuesday 05 September 2023

OVERVIEW Claus sulfur recovery (SRU): SRU is widely used to recover sulfur-containing, poisonous acidic gas in oil refinery process. The most commonly used process in sulfur recovery practice is Claus Process, which is to burn the incoming gas with oxygen, refrigerate the burnt gas...

Tuesday 05 September 2023

OVERVIEW Semi-regenerative Reforming (SRR): With the help of heating, hydrotreating and catalyst, petroleum reforming is a process which is used to convert petroleum refinery naphtha distilled from crude oil (typically having low octane ratings) into high-octane liquid products called...

Tuesday 05 September 2023

OVERVIEW Fluid Catalytic Cracking Unit (FCC): FCC is one of the most important conversions processes used in oil refinery process. The purpose of FCC unit is to transfer heavy crude oil into light oil. Under the action of heat and catalyst, upgrades the heavier, higher-boiling fractions...

Tuesday 05 September 2023

Model: YTH-080 Main Parameters: Temperature: 0℃/-20℃/-40℃/-70℃ ~ +150℃ Humidity: 20%～98% RH (lower humidity is optional) Heat-up speed: average 3℃/min Cool-down speed: average 1℃/min Description of 80l Desktop Type small temperature chamber 80l Desktop Type small climatic chamber...

Tuesday 05 September 2023

OVERVIEW Hydrotreating process (DHT): uses hydrogen to desulfurization unit the naphtha fraction from the crude oil distillation or other units within the refinery. Application of DHT: 1. Remove impurities and polluted elements from diesel fraction with a high efficiency 2. PCC's...

Tuesday 05 September 2023

Description of Cold Rolled Steel Strip Strip steel has more stringent thickness tolerances than cold-rolled steel. Before rolling, cold rolled steel strip is pickled to remove surface impurities and ensure a clean, even finish. The strip does not shrink or creep at ambient temperature...

Tuesday 05 September 2023

Description of Cold Rolled Sheet The china cr sheet is manufactured from the hot rolled sheet. The china hot rolled steel sheet is cleaned chemically and processed further in cold reduction mills, where the material is cooled (at room temperature) followed by annealing and/or tempers rolling...

Tuesday 05 September 2023

Description of Cold Rolled Coil Cold rolled coil, as known as CR coil, CRS or CRC. Cold rolled steel coils are a farther product that uses hot rolled steel coils to do further processing. The further processed steel coil put in a cold rolling mill where the material is cooled (at...)

Tuesday 05 September 2023

Anode Carbon Block Overview It participates in electrochemical reactions and directs current into the electrolytic cell. Each prebaked carbon anode block is preassembled by 1 ~ 3 anode carbon blocks, anode guide rod and steel claw (see anode carbon block assembly). The single anode...

Tuesday 05 September 2023

Aluminum Ingot Uses Aluminum is a silver-white metal and ranks third in the earth's crust after oxygen and silicon. The density of aluminum is relatively small, only 34.61% of iron and 30.33% of copper, so it is also called light metal. Aluminum is a non-ferrous metal whose output...

Tuesday 05 September 2023

According to the classification of electric furnace steelmaking power level and the difference of raw materials used for producing Graphite electrodes as well as the physical and chemical indexes of finished product, graphite electrodes are divided into three types: regular power...

Saturday 02 September 2023

Flangeless Fittings benefits a lot for low pressure and gastight removable systems which comes with a nut and a ferrule as a unit set to connect rigid tubing of outer diameter 1.6/2.0/2.5/3.0/3.175/3.2mm into a same thread receiving port, it is very convenient to use by hand tightened...

Saturday 02 September 2023

Female luer lock to barb connectors provide a convenient way to connect flexible tubing ID 1/16" to 1/4" with products that feature a male luer slip or luer lock end without the need for barbs or nuts, the material of medical grade PP ensure high purity without any contamination to sample fluids...

Saturday 02 September 2023

Barbed T Connectors are designed for quick and easy assembly in low-pressure applications, barbed tube/hose connectors are used to combine or divide fluid flow through flexible fluid tubing. High-quality food grade raw material polypropylene and a variety of sizes from 1/16 to 11/32...

Saturday 02 September 2023

Barbed Check Valves are designed for connecting flexible peristaltic tubing in low pressure systems less than 0.3Mpa to control the flow directions to make fluids flowing in one specific direction, so it makes fluids inlet-only or outlet-only to pumps or valves. Now the price of barbed...

Saturday 02 September 2023

The three way switching valve was driven by a stepper motor to switch the inside rotor to a specific port, but it is was triggered by DC7-33V voltage signals to power on and off just like common solenoid valves. Regarding this high pressure water solenoid valve, we have 2 way, 3 way...

Saturday 02 September 2023

12v peristaltic pump is available of 12V and 24V DC motor for specific system requirement, the peristaltic water pump DC motor can work immediately when triggered from the power supply, low cost, small compact size and low liquid pulse make it best choice for applications that require...

Saturday 02 September 2023

Cantidad : 200 sets/m - Precio : 6893-27573 USD

Tunnel type shot blasting machine is a non-standard shot blasting machine that is according to workpieces information to design. The tunnel type shot blasting machine is mainly used for surface treatment of large steel structures to achieve the removal of rust, old patent leather...

Saturday 02 September 2023

Cantidad : 200 sets/m - Precio : 6893-27573 USD

Tumble belt shot blasting machine or crawler shot blasting machine is the most universal among all shot blasters as their design makes them suitable for processing parts of different sizes in bulk loads. Shot blasting of casts, forged and pressed parts, remodelled cold or hot, of...

Saturday 02 September 2023

Cantidad : 200 sets/m - Precio : 6893-27573 USD

Shot peening machine is a process specifically designed to enhance the fatigue strength of components which are subject to high alternating stress. It can help to prevent fatigue cracks, corrosion, deteriorated strength and premature fatigue that can be caused by machining and form...

Saturday 02 September 2023

Cantidad : 200 sets/m - Precio : 6893-27573 USD

The main transmission of servo turret punching machine is directly from drive servo punch press, which retains the advantage of a simple and reliable structure as mechanical transmission, it features high efficiency, energy saving, low noise, high accuracy, and can realize many...

Saturday 02 September 2023

Cantidad : 200 sets/m - Precio : 6893-27573 USD

Rotary Table Shot Blasting Machine for Sale Rotary shot blasting machine or table type shot blasting machine is suitable for various shapes and dimensions, casts, forged parts, pressed parts, steel, and non-ferrous metal parts and parts made from fragile materials, cleaning surface...

Saturday 02 September 2023

Cantidad : 200 sets/m - Precio : 6893-27573 USD

On the preservation line, sheets and profiles are thoroughly blast cleaned and provided with a temporary corrosion protection coating. Along with the external transportation unit, the preservation line consists of a pass through blasting and painting machine, a painting unit and...

Saturday 02 September 2023

Cantidad : 200 sets/m - Precio : 6893-27573 USD

Pipe shot blasting machine or steel pipe shot blasting machine is suitable for any diameter and length of steel pipe cleaning, it can remove the oxide, rust, and scale from welded steel pipe, so that the pipe surface shows metallic colors. Pipe outer wall road shot blasting machine...

Saturday 02 September 2023

As high-performance Cr-Mo-V hot work die steel, HS DVN / HS DVN-Nb steel has high high-temperature strength and thermal fatigue resistance, is widely used in casting dies, hot extrusion dies, hot punching dies, hot forging dies, etc. Chemical properties of HS DVN/ HS DVN-Nb Steel...

Saturday 02 September 2023

Oue company strive to supply high quality of cold work die steel, and the HS DC53 is an important one. As high-toughness high-wear-resistance cold work die steel, HS DC53 equivalent, can be applied to stamping dies and cold forging dies, which is dc53 steel equivalent, 1.2990 steel...

Saturday 02 September 2023

As modified cold work tool steel, HS A4 is improved high-toughness impact-resistant cold work die steel. It has fine and uniform ledeburite carbides, high toughness and impact resistance, and is not easy to crack when used for molds with complex shapes. The steel is a new generation...

Saturday 02 September 2023

HS 2738 steel is modified pre-hardened mirror plastic mold steel. Key technologies of alloy composition optimization and organization control ensure that the module has high hardness uniformity, excellent polishing performance and processing performance at the largest cross-sectional size...

Saturday 02 September 2023

HS 2344 using 1.2344 steel is pressure-resistant hot-working die steel. The performance and use of HS material 2344 are basically the same as that of H13 steel, and it is one of the widely used hot work die steels. HS 2344 steel material can withstand huge mechanical stress, as well...

Saturday 02 September 2023

As large-size (thickness range 400-750mm) and high-polished plastic mold steel, HS 2343ESR-S, as a 1.2343 steel equivalent material, has higher purity and good structure uniformity through unique smelting and heat treatment process. The hot work steel has good polishing performance...