ELECTRICAL - 7825 Anuncios

Jueves 23 mayo 2024

ELECTRET MASTERBATCH An Electret Masterbatch refers to a parent granule that retains charge in a polymer material for a long time, which can be added to plastic materials such as polypropylene to impart them with an electric charge. These masterbatches are typically used in the production...

Jueves 23 mayo 2024

CONDUCTIVE MASTERBATCH Conductive Masterbatch is a type of plastic additive used to impart electrical conductivity to plastic products. It contains a high concentration of conductive particles, such as carbon black or metal oxides, dispersed in a carrier resin, which is added to the...

Jueves 23 mayo 2024

Color Masterbatch Industry Color masterbatches are highly concentrated formulations of pigments or dyes in a carrier resin. They are used in the plastics industry to add color to various plastic products. The use of color concentrates for plastics simplifies the color matching process...

Jueves 23 mayo 2024

Cantidad : 80 000psc/ - Precio : USD25~USD40

Baby swings are designed to provide comfort and entertainment for your baby. With a variety of motions and adjustable settings, our swings are perfect for naptime or playtime. Sturdy construction and plush materials ensure safety and durability, while easy-to-use features make it...

Jueves 23 mayo 2024

MOV stands for Metal Oxide Varistor. It is a type of surge arrester that is used to protect electrical systems and equipment from overvoltage transients. It consists of a metal oxide material that acts as a voltage-dependent resistor, which limits the voltage across the device. Design...

Jueves 23 mayo 2024

The mov blocks, otherwise referred to as zinc oxide varistors or energy blocks, serve as the core component of arresters. At TGE, we specialize in the production of AC, DC, and high gradient mov varistors, offering a wide range of products to cater to the technical requirements of...

Jueves 23 mayo 2024

TGE developed D36 & D42 series glass coating MOV which be suitable for distribution arresters according to IEC60099-4 (2014) in 2018. Based on the proven technique of high-performance metal oxide varistor, a special new type of metal oxide varistor can be used in heavy-duty distribution...

Jueves 23 mayo 2024

The D99 Series MOV for Substation Arrester is a state-of-the-art lightning arrester designed to protect substations from lightning and overvoltage surges. It is made up of a metal oxide varistor block that provides superior protection and stability against heavy load surges up to 750-1000kV...

Jueves 23 mayo 2024

The D85 Series High Gradient MOV for GIS Arresters is a must-have for any 330kV GIS surge arrester system. This MOV varistor provides ultra-high gradient performance and is designed to effectively protect against high voltage surges in the GIS environment. The series offers a variety...

Jueves 23 mayo 2024

D78H35.4DC MOV for DC Arresters is a lightning protection device designed to protect your home, business, and other structures from the potentially devastating consequences of thunder and lightning. This MOV block is a highly reliable and effective metal oxide arrester (MOV) that...

Jueves 23 mayo 2024

D70 Series MOV Surge Arrester is a reliable surge protection device designed to protect electrical and electronic equipment from high voltage surges. It has a compact design and is made of high-quality material which ensures that it is reliable and durable. The mov surge protection...

Jueves 23 mayo 2024

The white film is a type of polyester pet film made of special raw materials and special processes. In addition to the good physical and chemical properties of the ordinary film. White PET film refers to a type of polyester film that has an opaque, white appearance. This white polyester...

Jueves 23 mayo 2024

1. PET film is a milky white polyester film that offers excellent clarity, strength, and dimensional stability. 2. It has good chemical resistance, excellent electrical properties, and good abrasion resistance. 3. It also has a low water absorption rate and is highly resistant to UV radiation...

Jueves 23 mayo 2024

Metal Material Machining Aluminum Alloys Aluminum alloy material is divided into: 6061 mainly contains magnesium and silicon elements, suitable for applications requiring high corrosion resistance and oxidation, easy to coat, and good processability. It is suitable for aircraft parts...

Jueves 23 mayo 2024

The multi-function portable cold thermal binocular utilizes a multi-sensor image processing algorithm to fuse infrared thermal imaging, low-light sensor image, laser ranging, GPS and electronic compass data to make the information of the target object at multiple angles Presented...

Jueves 23 mayo 2024

TB640-C216T60-L3 professional night vision thermal binoculars integrate with uncooled thermal imager, visible camera, GPS, electronic compass, an eye-safe laser range finder. The night vision thermal binoculars can be used for target searching, locates the target's position, and take...

Miércoles 22 mayo 2024

Duoyes Outdoor Fire Pit Table, as the key elements of Duoyes patio fire pit Sets, are specially created to allow you to enjoy a great dinner, even in a cold season, with your loved family, or host some best friends with nice coffee and drinks, in a private Garden, Backyard, Balcony or Porch...

Miércoles 22 mayo 2024

Cantidad : 1-1000PCS - Precio : 500-10000￥

The cnt membrane will undergo a high single-walled carbon nanotube preparation process, which gives itself excellent and stable optoelectronic properties, better light transmittance, and better electrical conductivity. This carbon fiber membrane series is suitable for flexibility...

Miércoles 22 mayo 2024

Cantidad : 1-1000PCS - Precio : 500-10000￥

Carbon nanotubes have good flexibility, excellent electrical and thermal conductivity, and are seamless, hollow tubes formed by graphene sheets formed by carbon atoms. Carbon nanotube sheet has the advantages of large flow rate, small linear expansion coefficient, good high and low-temperature...

Miércoles 22 mayo 2024

Metal welding is a manufacturing process and technology to join metals or other thermoplastic materials such as plastics by heating, high temperature or high pressure. There are many types of custom metal welding. TIG(Tungsten Inert Gas), MIG (Metal, Inert Gas), GMAW (Gas, china metal welding)...

Miércoles 22 mayo 2024

Stamping is a cold stamping process, which is to cut, bend or shape the material into the finished shape and size in accordance with the mold with the punching force from the stamping machine. As one of the leading China stamping metalworking manufacturers, Hunkmachining provides...

Martes 21 mayo 2024

Ultrasonic sensors convert ultrasonic signals into other energy signals usually electrical signals, and have the dual functions of transmitting and receiving sound waves. At present, piezoelectric ultrasonic sensors are commonly used in automotives. Its key component is a piezoelectric...

Martes 21 mayo 2024

ASME SB111 C70600 Tube Copper-nickel alloy that resists seawater corrosion and has high antifouling properties against marine microorganisms. You can find ASTM B111 tubes using ASME SB111 alloy are widely used in shipbuilding repair, petrochemical, natural gas, and other marine engineering...

Sábado 18 mayo 2024

Richconn offers customized powder coating services for your metal parts that are non-stick, abrasion resistant, corrosion resistant, insulating, lubricating, electrically conductive, magnetically conductive, icing resistant, heat resistant, fouling resistant, damping, reflective,...

Sábado 18 mayo 2024

Plating is the process of depositing metal on the surface of parts using electrolysis to form a protective metal layer. Richconn can provide you with chrome plating, rhodium plating, nickel plating, zinc plating, copper plating, tin plating, cadmium plating, titanium plating, Aluminum...

Sábado 18 mayo 2024

Aluminum Disc China Aluminium circle is also known as al disc circle, which is a perfect material for making aluminium round metal. Usually, it is cut from aluminum alloy.It is usual with thickness from 0.3mm-10mm, diameter from 100mm-800mm Types of Aluminium Round Disc Grade Model...

Sábado 18 mayo 2024

Precio : 2.8-3.2USD

Common Injection Molding Materials What materials are used in injection moulding? Materials used in injection moulding generally include abs molding, nylon injection molding, polycarbonate injection molding, PP injection molding, PVC injection molding, HDPE injection molding, and so on...

Sábado 18 mayo 2024

Cantidad : 15000Piece - Precio : $0.18~$0.3/Watt;$45~

Type1 Portable EV Charging Cable The cable conforms to the SAE Standard (USA) of EV Charging, which suits electric vehicles manufactured in America. As mostly customer had asked, it has a unique design that one button attached with a hole (reserved for the electronic lock to avoid...)

Sábado 18 mayo 2024

Second Sun Solar 's 15 watt street light is a new type of energy lamp, which converts electric energy from solar energy and stores the energy in the battery. It is controlled by the controller program to achieve the purpose of absorbing sunlight during the day and turning on the light at night...

Sábado 18 mayo 2024

Cantidad : 15000Piece - Precio : $0.18~$0.3/Watt;$45~

Our type 1 charging cable conforms to the SAE Standard (USA) of EV Charging, which suits electric vehicles manufactured in America. As most customers had asked, it has a unique design that one button is attached with a hole (reserved for the electronic lock to avoid stealing) on the...